| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname()
It will cause null-ptr-deref if platform_get_resource_byname() returns NULL,
we need check the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
platform_get_resource() may return NULL, add proper check to
avoid potential NULL dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc
The allocation funciton devm_kcalloc may fail and return a null pointer,
which would cause a null-pointer dereference later.
It might be better to check it and directly return -ENOMEM just like the
usage of devm_kcalloc in previous code. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix listen() setting the bar too high for the prealloc rings
AF_RXRPC's listen() handler lets you set the backlog up to 32 (if you bump
up the sysctl), but whilst the preallocation circular buffers have 32 slots
in them, one of them has to be a dead slot because we're using CIRC_CNT().
This means that listen(rxrpc_sock, 32) will cause an oops when the socket
is closed because rxrpc_service_prealloc_one() allocated one too many calls
and rxrpc_discard_prealloc() won't then be able to get rid of them because
it'll think the ring is empty. rxrpc_release_calls_on_socket() then tries
to abort them, but oopses because call->peer isn't yet set.
Fix this by setting the maximum backlog to RXRPC_BACKLOG_MAX - 1 to match
the ring capacity.
BUG: kernel NULL pointer dereference, address: 0000000000000086
...
RIP: 0010:rxrpc_send_abort_packet+0x73/0x240 [rxrpc]
Call Trace:
<TASK>
? __wake_up_common_lock+0x7a/0x90
? rxrpc_notify_socket+0x8e/0x140 [rxrpc]
? rxrpc_abort_call+0x4c/0x60 [rxrpc]
rxrpc_release_calls_on_socket+0x107/0x1a0 [rxrpc]
rxrpc_release+0xc9/0x1c0 [rxrpc]
__sock_release+0x37/0xa0
sock_close+0x11/0x20
__fput+0x89/0x240
task_work_run+0x59/0x90
do_exit+0x319/0xaa0 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: renesas: rzn1: Fix possible null-ptr-deref in sh_pfc_map_resources()
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: bcm: Check for NULL return of devm_kzalloc()
As the potential failure of allocation, devm_kzalloc() may return NULL. Then
the 'pd->pmb' and the follow lines of code may bring null pointer dereference.
Therefore, it is better to check the return value of devm_kzalloc() to avoid
this confusion. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: renesas: core: Fix possible null-ptr-deref in sh_pfc_map_resources()
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix potential NULL pointer dereference
If sd_probe() sees an early error before sdkp->device is initialized,
sd_zbc_release_disk() is called. This causes a NULL pointer dereference
when sd_is_zoned() is called inside that function. Avoid this by removing
the call to sd_zbc_release_disk() in sd_probe() error path.
This change is safe and does not result in zone information memory leakage
because the zone information for a zoned disk is allocated only when
sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set,
resulting in sd_disk_release() being called when needed to cleanup a disk
zone information using sd_zbc_release_disk(). |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: mt6397: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pl031: fix rtc features null pointer dereference
When there is no interrupt line, rtc alarm feature is disabled.
The clearing of the alarm feature bit was being done prior to allocations
of ldata->rtc device, resulting in a null pointer dereference.
Clear RTC_FEATURE_ALARM after the rtc device is allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()
In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode()
is assigned to mode and is passed to drm_mode_probed_add() directly after
that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and
there is a dereference of it in list_add_tail() without recoveries, which
could lead to NULL pointer dereference on failure of
amdgpu_dm_create_common_mode().
Fix this by adding a NULL check of mode.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: populate connector of struct dp_panel
DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.
The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.
Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()
Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp
Changes in V4:
-- add more details to commit text
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: fix race between xmit and reset
There is a race between reset and the transmit paths that can lead to
ibmvnic_xmit() accessing an scrq after it has been freed in the reset
path. It can result in a crash like:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000016189f8
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic]
LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
Call Trace:
[c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable)
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c9cfcc] sch_direct_xmit+0xec/0x330
[c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0
[c000000000c00ad4] __dev_queue_xmit+0x394/0x730
[c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding]
[c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding]
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c00ca4] __dev_queue_xmit+0x564/0x730
[c000000000cf97e0] neigh_hh_output+0xd0/0x180
[c000000000cfa69c] ip_finish_output2+0x31c/0x5c0
[c000000000cfd244] __ip_queue_xmit+0x194/0x4f0
[c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0
[c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0
[c000000000d2d984] tcp_retransmit_skb+0x34/0x130
[c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0
[c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330
[c000000000d317bc] tcp_write_timer+0x5c/0x200
[c000000000243270] call_timer_fn+0x50/0x1c0
[c000000000243704] __run_timers.part.0+0x324/0x460
[c000000000243894] run_timer_softirq+0x54/0xa0
[c000000000ea713c] __do_softirq+0x15c/0x3e0
[c000000000166258] __irq_exit_rcu+0x158/0x190
[c000000000166420] irq_exit+0x20/0x40
[c00000000002853c] timer_interrupt+0x14c/0x2b0
[c000000000009a00] decrementer_common_virt+0x210/0x220
--- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
The immediate cause of the crash is the access of tx_scrq in the following
snippet during a reset, where the tx_scrq can be either NULL or an address
that will soon be invalid:
ibmvnic_xmit()
{
...
tx_scrq = adapter->tx_scrq[queue_num];
txq = netdev_get_tx_queue(netdev, queue_num);
ind_bufp = &tx_scrq->ind_buf;
if (test_bit(0, &adapter->resetting)) {
...
}
But beyond that, the call to ibmvnic_xmit() itself is not safe during a
reset and the reset path attempts to avoid this by stopping the queue in
ibmvnic_cleanup(). However just after the queue was stopped, an in-flight
ibmvnic_complete_tx() could have restarted the queue even as the reset is
progressing.
Since the queue was restarted we could get a call to ibmvnic_xmit() which
can then access the bad tx_scrq (or other fields).
We cannot however simply have ibmvnic_complete_tx() check the ->resetting
bit and skip starting the queue. This can race at the "back-end" of a good
reset which just restarted the queue but has not cleared the ->resetting
bit yet. If we skip restarting the queue due to ->resetting being true,
the queue would remain stopped indefinitely potentially leading to transmit
timeouts.
IOW ->resetting is too broad for this purpose. Instead use a new flag
that indicates whether or not the queues are active. Only the open/
reset paths control when the queues are active. ibmvnic_complete_tx()
and others wake up the queue only if the queue is marked active.
So we will have:
A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open()
->resetting = true
->tx_queues_active = false
disable tx queues
...
->tx_queues_active = true
start tx queues
B. Tx interrupt in ibmvnic_complete_tx():
if (->tx_queues_active)
netif_wake_subqueue();
To ensure that ->tx_queues_active and state of the queues are consistent,
we need a lock which:
- must also be taken in the interrupt path (ibmvnic_complete_tx())
- shared across the multiple
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
clk: Fix clk_hw_get_clk() when dev is NULL
Any registered clk_core structure can have a NULL pointer in its dev
field. While never actually documented, this is evidenced by the wide
usage of clk_register and clk_hw_register with a NULL device pointer,
and the fact that the core of_clk_hw_register() function also passes a
NULL device pointer.
A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that
case will result in a NULL pointer derefence when it calls dev_name() on
that NULL device pointer.
Add a test for this case and use NULL as the dev_id if the device
pointer is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: switchdev: fix possible NULL pointer dereference
As the possible failure of the allocation, devm_kzalloc() may return NULL
pointer.
Therefore, it should be better to check the 'db' in order to prevent
the dereference of NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: cavium - fix NULL but dereferenced coccicheck error
Fix following coccicheck warning:
./drivers/char/hw_random/cavium-rng-vf.c:182:17-20: ERROR:
pdev is NULL but dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: felix: fix possible NULL pointer dereference
As the possible failure of the allocation, kzalloc() may return NULL
pointer.
Therefore, it should be better to check the 'sgi' in order to prevent
the dereference of NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ath11k: mhi: use mhi_sync_power_up()
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.
I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.
[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sprd: fix potential NULL dereference
'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference
it, remove this warning log.
v1 -> v2:
- Split checking platform_get_resource() return value to a separate patch
- Use dev_warn() instead of removing the warning log |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vchiq_core: handle NULL result of find_service_by_handle
In case of an invalid handle the function find_servive_by_handle
returns NULL. So take care of this and avoid a NULL pointer dereference. |
