| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: quota: fix loop condition at f2fs_quota_sync()
cnt should be passed to sb_has_quota_active() instead of type to check
active quota properly.
Moreover, when the type is -1, the compiler with enough inline knowledge
can discard sb_has_quota_active() check altogether, causing a NULL pointer
dereference at the following inode_lock(dqopt->files[cnt]):
[ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 2.796024] Mem abort info:
[ 2.796025] ESR = 0x96000005
[ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.796029] SET = 0, FnV = 0
[ 2.796031] EA = 0, S1PTW = 0
[ 2.796032] Data abort info:
[ 2.796034] ISV = 0, ISS = 0x00000005
[ 2.796035] CM = 0, WnR = 0
[ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000
[ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000
[ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1
[ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT)
[ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO)
[ 2.796065] pc : down_write+0x28/0x70
[ 2.796070] lr : f2fs_quota_sync+0x100/0x294
[ 2.796071] sp : ffffffa3f48ffc30
[ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000
[ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80
[ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001
[ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000
[ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110
[ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038
[ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0
[ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0
[ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000
[ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948
[ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0
[ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a
[ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d
[ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001
[ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0
[ 2.796098] Call trace:
[ 2.796100] down_write+0x28/0x70
[ 2.796102] f2fs_quota_sync+0x100/0x294
[ 2.796104] block_operations+0x120/0x204
[ 2.796106] f2fs_write_checkpoint+0x11c/0x520
[ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34
[ 2.796109] issue_checkpoint_thread+0x6c/0xb8
[ 2.796112] kthread+0x138/0x414
[ 2.796114] ret_from_fork+0x10/0x18
[ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02)
[ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]---
[ 2.800116] Kernel panic - not syncing: Fatal exception
[ 2.800120] SMP: stopping secondary CPUs |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix race at socket teardown
Fix a race in the xsk socket teardown code that can lead to a NULL pointer
dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by
setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any
NAPI processing to terminate using synchronize_net(). After that, the release
code starts to tear down the socket state and free allocated memory.
BUG: kernel NULL pointer dereference, address: 00000000000000c0
PGD 8000000932469067 P4D 8000000932469067 PUD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G I 5.16.0+ #2
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015
RIP: 0010:__xsk_sendmsg+0x2c/0x690
[...]
RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258
RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800
RBP: ffffa2348bd13db0 R08: 0000000000000000 R09: 00007ffffffff000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d5fc5489800
R13: ffff8d5fcb0f5140 R14: ffff8d5fcb0f5140 R15: 0000000000000000
FS: 00007f991cff9400(0000) GS:ffff8d6f1f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 0000000114888005 CR4: 00000000001706e0
Call Trace:
<TASK>
? aa_sk_perm+0x43/0x1b0
xsk_sendmsg+0xf0/0x110
sock_sendmsg+0x65/0x70
__sys_sendto+0x113/0x190
? debug_smp_processor_id+0x17/0x20
? fpregs_assert_state_consistent+0x23/0x50
? exit_to_user_mode_prepare+0xa5/0x1d0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
There are two problems with the current code. First, setting xs->dev to NULL
before waiting for all users to stop using the socket is not correct. The
entry to the data plane functions xsk_poll(), xsk_sendmsg(), and xsk_recvmsg()
are all guarded by a test that xs->state is in the state XSK_BOUND and if not,
it returns right away. But one process might have passed this test but still
have not gotten to the point in which it uses xs->dev in the code. In this
interim, a second process executing xsk_unbind_dev() might have set xs->dev to
NULL which will lead to a crash for the first process. The solution here is
just to get rid of this NULL assignment since it is not used anymore. Before
commit 42fddcc7c64b ("xsk: use state member for socket synchronization"),
xs->dev was the gatekeeper to admit processes into the data plane functions,
but it was replaced with the state variable xs->state in the aforementioned
commit.
The second problem is that synchronize_net() does not wait for any process in
xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() to complete, which means that the
state they rely on might be cleaned up prematurely. This can happen when the
notifier gets called (at driver unload for example) as it uses xsk_unbind_dev().
Solve this by extending the RCU critical region from just the ndo_xsk_wakeup
to the whole functions mentioned above, so that both the test of xs->state ==
XSK_BOUND and the last use of any member of xs is covered by the RCU critical
section. This will guarantee that when synchronize_net() completes, there will
be no processes left executing xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() and
state can be cleaned up safely. Note that we need to drop the RCU lock for the
skb xmit path as it uses functions that might sleep. Due to this, we have to
retest the xs->state after we grab the mutex that protects the skb xmit code
from, among a number of things, an xsk_unbind_dev() being executed from the
notifier at the same time. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances
vchiq_get_state() can return a NULL pointer. So handle this cases and
avoid a NULL pointer derefence in vchiq_dump_platform_instances. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix unregistering of framebuffers without device
OF framebuffers do not have an underlying device in the Linux
device hierarchy. Do a regular unregister call instead of hot
unplugging such a non-existing device. Fixes a NULL dereference.
An example error message on ppc64le is shown below.
BUG: Kernel NULL pointer dereference on read at 0x00000060
Faulting instruction address: 0xc00000000080dfa4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
[...]
CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1
NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430
REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000
CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0
GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029
GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000
GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283
GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000
GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80
GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0
GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0
GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0
NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0
[c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable)
[c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150
[c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0
[c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm]
[c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs]
[...]
[c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0
[c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250
The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug
firmware fb devices on forced removal"). Most firmware framebuffers
have an underlying platform device, which can be hot-unplugged
before loading the native graphics driver. OF framebuffers do not
(yet) have that device. Fix the code by unregistering the framebuffer
as before without a hot unplug.
Tested with 5.17 on qemu ppc64le emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: prodikeys: Check presence of pm->input_ep82
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one. |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix TX channel offset when using legacy interrupts
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB
Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while
KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with
4K pages, both values match (8KB), so allocation and reserved space
are consistent.
However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB,
while the reserved trap area remains 8KB. This mismatch causes the
kernel to crash when running rocminfo or rccl unit tests.
Kernel attempted to read user page (2) - exploit attempt? (uid: 1001)
BUG: Kernel NULL pointer dereference on read at 0x00000002
Faulting instruction address: 0xc0000000002c8a64
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E
6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY
Tainted: [E]=UNSIGNED_MODULE
Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006
of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries
NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730
REGS: c0000001e0957580 TRAP: 0300 Tainted: G E
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268
XER: 00000036
CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000
IRQMASK: 1
GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100
c00000013d814540
GPR04: 0000000000000002 c00000013d814550 0000000000000045
0000000000000000
GPR08: c00000013444d000 c00000013d814538 c00000013d814538
0000000084002268
GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff
0000000000020000
GPR16: 0000000000000000 0000000000000002 c00000015f653000
0000000000000000
GPR20: c000000138662400 c00000013d814540 0000000000000000
c00000013d814500
GPR24: 0000000000000000 0000000000000002 c0000001e0957888
c0000001e0957878
GPR28: c00000013d814548 0000000000000000 c00000013d814540
c0000001e0957888
NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0
LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00
Call Trace:
0xc0000001e0957890 (unreliable)
__mutex_lock.constprop.0+0x58/0xd00
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu]
kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu]
kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu]
kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu]
kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu]
kfd_ioctl+0x514/0x670 [amdgpu]
sys_ioctl+0x134/0x180
system_call_exception+0x114/0x300
system_call_vectored_common+0x15c/0x2ec
This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and
KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve
64 KB for the trap in the address space, but only allocate 8 KB within
it. With this approach, the allocation size never exceeds the reserved
area.
(cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: fix null-ptr-deref in icmp_build_probe()
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface". |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: guard local VLAN-0 FDB helpers against NULL vlan group
When CONFIG_BRIDGE_VLAN_FILTERING is not set, br_vlan_group() and
nbp_vlan_group() return NULL (br_private.h stub definitions). The
BR_BOOLOPT_FDB_LOCAL_VLAN_0 toggle code is compiled unconditionally and
reaches br_fdb_delete_locals_per_vlan_port() and
br_fdb_insert_locals_per_vlan_port(), where the NULL vlan group pointer
is dereferenced via list_for_each_entry(v, &vg->vlan_list, vlist).
The observed crash is in the delete path, triggered when creating a
bridge with IFLA_BR_MULTI_BOOLOPT containing BR_BOOLOPT_FDB_LOCAL_VLAN_0
via RTM_NEWLINK. The insert helper has the same bug pattern.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7]
RIP: 0010:br_fdb_delete_locals_per_vlan+0x2b9/0x310
Call Trace:
br_fdb_toggle_local_vlan_0+0x452/0x4c0
br_toggle_fdb_local_vlan_0+0x31/0x80 net/bridge/br.c:276
br_boolopt_toggle net/bridge/br.c:313
br_boolopt_multi_toggle net/bridge/br.c:364
br_changelink net/bridge/br_netlink.c:1542
br_dev_newlink net/bridge/br_netlink.c:1575
Add NULL checks for the vlan group pointer in both helpers, returning
early when there are no VLANs to iterate. This matches the existing
pattern used by other bridge FDB functions such as br_fdb_add() and
br_fdb_delete(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
We need to check __in6_dev_get() for possible NULL value, as
suggested by Yiming Qian.
Also add skb_dst_dev_rcu() instead of skb_dst_dev(),
and two missing READ_ONCE().
Note that @dev can't be NULL. |
| An authenticated user can crash mongod when running $rankFusion or $scoreFusion with an empty pipeline on a view.
When resolving a view, the server inspects the aggregation pipeline to determine whether it begins with an Atlas Search stage. For $rankFusion and $scoreFusion, this inspection reads the first element on each stage’s input pipeline array without first verifying that the array is non-empty. Supplying an empty pipeline causes a null pointer dereference and crashes the server.
This issue affects MongoDB Server 8.2 versions prior to 8.2.7. |
| GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. In version 4.4.0, an unauthenticated remote BGP peer can trigger a fatal panic in GoBGP by sending a specially crafted BGP UPDATE message. When the server receives a message with inconsistent attribute lengths, it improperly handles the internal state transition to a "withdraw" action, leading to a nil pointer dereference in the AdjRib.Update function. This causes the entire GoBGP process to crash, resulting in a complete loss of service availability. This issue has been patched in version 4.5.0. |
| A vulnerability was determined in Open5GS up to 2.7.7. Affected is the function smf_nsmf_handle_create_data_in_hsmf of the component SMF. Executing a manipulation can lead to null pointer dereference. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com
On the case tmp_dcim=1, the index of buffer is miscalculated.
This generate a NULL pointer dereference later.
So let's fix the calcul and add a check to prevent this to reappear. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace()
The kernel log indicates a crash in ufshcd_add_command_trace, due to a NULL
pointer dereference when accessing hwq->id. This can happen if
ufshcd_mcq_req_to_hwq() returns NULL.
This patch adds a NULL check for hwq before accessing its id field to
prevent a kernel crash.
Kernel log excerpt:
[<ffffffd5d192dc4c>] notify_die+0x4c/0x8c
[<ffffffd5d1814e58>] __die+0x60/0xb0
[<ffffffd5d1814d64>] die+0x4c/0xe0
[<ffffffd5d181575c>] die_kernel_fault+0x74/0x88
[<ffffffd5d1864db4>] __do_kernel_fault+0x314/0x318
[<ffffffd5d2a3cdf8>] do_page_fault+0xa4/0x5f8
[<ffffffd5d2a3cd34>] do_translation_fault+0x34/0x54
[<ffffffd5d1864524>] do_mem_abort+0x50/0xa8
[<ffffffd5d2a297dc>] el1_abort+0x3c/0x64
[<ffffffd5d2a29718>] el1h_64_sync_handler+0x44/0xcc
[<ffffffd5d181133c>] el1h_64_sync+0x80/0x88
[<ffffffd5d255c1dc>] ufshcd_add_command_trace+0x23c/0x320
[<ffffffd5d255bad8>] ufshcd_compl_one_cqe+0xa4/0x404
[<ffffffd5d2572968>] ufshcd_mcq_poll_cqe_lock+0xac/0x104
[<ffffffd5d11c7460>] ufs_mtk_mcq_intr+0x54/0x74 [ufs_mediatek_mod]
[<ffffffd5d19ab92c>] __handle_irq_event_percpu+0xc8/0x348
[<ffffffd5d19abca8>] handle_irq_event+0x3c/0xa8
[<ffffffd5d19b1f0c>] handle_fasteoi_irq+0xf8/0x294
[<ffffffd5d19aa778>] generic_handle_domain_irq+0x54/0x80
[<ffffffd5d18102bc>] gic_handle_irq+0x1d4/0x330
[<ffffffd5d1838210>] call_on_irq_stack+0x44/0x68
[<ffffffd5d183af30>] do_interrupt_handler+0x78/0xd8
[<ffffffd5d2a29c00>] el1_interrupt+0x48/0xa8
[<ffffffd5d2a29ba8>] el1h_64_irq_handler+0x14/0x24
[<ffffffd5d18113c4>] el1h_64_irq+0x80/0x88
[<ffffffd5d2527fb4>] arch_local_irq_enable+0x4/0x1c
[<ffffffd5d25282e4>] cpuidle_enter+0x34/0x54
[<ffffffd5d195a678>] do_idle+0x1dc/0x2f8
[<ffffffd5d195a7c4>] cpu_startup_entry+0x30/0x3c
[<ffffffd5d18155c4>] secondary_start_kernel+0x134/0x1ac
[<ffffffd5d18640bc>] __secondary_switched+0xc4/0xcc |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
command during this race window, it triggers a NULL pointer
dereference, leading to a kernel panic (local DoS).
This exposes an inconsistent API usage within the module, as peer
functions like `usbg_submit_command()` and `bot_send_bad_response()`
correctly implement a NULL check for `tv_nexus` before proceeding.
Fix this by bringing consistency to the nexus handling. Add the
missing `if (!tv_nexus)` checks to the vulnerable BOT command and
request processing paths, aborting the command gracefully with an
error instead of crashing the system. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix possible dereference of uninitialized pointer
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Fix NULL pointer exception during user_scan()
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to shost->max_channel)
via scsi_scan_host_selected() in commit 37c4e72b0651 ("scsi: Fix
sas_user_scan() to handle wildcard and multi-channel scans"). However,
hisi_sas supports only one channel, and the current value of max_channel is
1. sas_user_scan() for channel 1 will trigger the following NULL pointer
exception:
[ 441.554662] Unable to handle kernel NULL pointer dereference at virtual address 00000000000008b0
[ 441.554699] Mem abort info:
[ 441.554710] ESR = 0x0000000096000004
[ 441.554718] EC = 0x25: DABT (current EL), IL = 32 bits
[ 441.554723] SET = 0, FnV = 0
[ 441.554726] EA = 0, S1PTW = 0
[ 441.554730] FSC = 0x04: level 0 translation fault
[ 441.554735] Data abort info:
[ 441.554737] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 441.554742] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 441.554747] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 441.554752] user pgtable: 4k pages, 48-bit VAs, pgdp=00000828377a6000
[ 441.554757] [00000000000008b0] pgd=0000000000000000, p4d=0000000000000000
[ 441.554769] Internal error: Oops: 0000000096000004 [#1] SMP
[ 441.629589] Modules linked in: arm_spe_pmu arm_smmuv3_pmu tpm_tis_spi hisi_uncore_sllc_pmu hisi_uncore_pa_pmu hisi_uncore_l3c_pmu hisi_uncore_hha_pmu hisi_uncore_ddrc_pmu hisi_uncore_cpa_pmu hns3_pmu hisi_ptt hisi_pcie_pmu tpm_tis_core spidev spi_hisi_sfc_v3xx hisi_uncore_pmu spi_dw_mmio fuse hclge hclge_common hisi_sec2 hisi_hpre hisi_zip hisi_qm hns3 hisi_sas_v3_hw sm3_ce sbsa_gwdt hnae3 hisi_sas_main uacce hisi_dma i2c_hisi dm_mirror dm_region_hash dm_log dm_mod
[ 441.670819] CPU: 46 UID: 0 PID: 6994 Comm: bash Kdump: loaded Not tainted 7.0.0-rc2+ #84 PREEMPT
[ 441.691327] pstate: 81400009 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 441.698277] pc : sas_find_dev_by_rphy+0x44/0x118
[ 441.702896] lr : sas_find_dev_by_rphy+0x3c/0x118
[ 441.707502] sp : ffff80009abbba40
[ 441.710805] x29: ffff80009abbba40 x28: ffff082819a40008 x27: ffff082810c37c08
[ 441.717930] x26: ffff082810c37c28 x25: ffff082819a40290 x24: ffff082810c37c00
[ 441.725054] x23: 0000000000000000 x22: 0000000000000001 x21: ffff082819a40000
[ 441.732179] x20: ffff082819a40290 x19: 0000000000000000 x18: 0000000000000020
[ 441.739304] x17: 0000000000000000 x16: ffffb5dad6bda690 x15: 00000000ffffffff
[ 441.746428] x14: ffff082814c3b26c x13: 00000000ffffffff x12: ffff082814c3b26a
[ 441.753553] x11: 00000000000000c0 x10: 000000000000003a x9 : ffffb5dad5ea94f4
[ 441.760678] x8 : 000000000000003a x7 : ffff80009abbbab0 x6 : 0000000000000030
[ 441.767802] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 441.774926] x2 : ffff08280f35a300 x1 : ffffb5dad7127180 x0 : 0000000000000000
[ 441.782053] Call trace:
[ 441.784488] sas_find_dev_by_rphy+0x44/0x118 (P)
[ 441.789095] sas_target_alloc+0x24/0xb0
[ 441.792920] scsi_alloc_target+0x290/0x330
[ 441.797010] __scsi_scan_target+0x88/0x258
[ 441.801096] scsi_scan_channel+0x74/0xb8
[ 441.805008] scsi_scan_host_selected+0x170/0x188
[ 441.809615] sas_user_scan+0xfc/0x148
[ 441.813267] store_scan+0x10c/0x180
[ 441.816743] dev_attr_store+0x20/0x40
[ 441.820398] sysfs_kf_write+0x84/0xa8
[ 441.824054] kernfs_fop_write_iter+0x130/0x1c8
[ 441.828487] vfs_write+0x2c0/0x370
[ 441.831880] ksys_write+0x74/0x118
[ 441.835271] __arm64_sys_write+0x24/0x38
[ 441.839182] invoke_syscall+0x50/0x120
[ 441.842919] el0_svc_common.constprop.0+0xc8/0xf0
[ 441.847611] do_el0_svc+0x24/0x38
[ 441.850913] el0_svc+0x38/0x158
[ 441.854043] el0t_64_sync_handler+0xa0/0xe8
[ 441.858214] el0t_64_sync+0x1ac/0x1b0
[ 441.861865] Code: aa1303e0 97ff70a8 34ffff80 d10a4273 (f9445a75)
[ 441.867946] ---[ end trace 0000000000000000 ]---
Therefore
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
md-cluster: fix NULL pointer dereference in process_metadata_update
The function process_metadata_update() blindly dereferences the 'thread'
pointer (acquired via rcu_dereference_protected) within the wait_event()
macro.
While the code comment states "daemon thread must exist", there is a valid
race condition window during the MD array startup sequence (md_run):
1. bitmap_load() is called, which invokes md_cluster_ops->join().
2. join() starts the "cluster_recv" thread (recv_daemon).
3. At this point, recv_daemon is active and processing messages.
4. However, mddev->thread (the main MD thread) is not initialized until
later in md_run().
If a METADATA_UPDATED message is received from a remote node during this
specific window, process_metadata_update() will be called while
mddev->thread is still NULL, leading to a kernel panic.
To fix this, we must validate the 'thread' pointer. If it is NULL, we
release the held lock (no_new_dev_lockres) and return early, safely
ignoring the update request as the array is not yet fully ready to
process it. |
