| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Don't hold the layoutget locks across multiple RPC calls
When doing layoutget as part of the open() compound, we have to be
careful to release the layout locks before we can call any further RPC
calls, such as setattr(). The reason is that those calls could trigger
a recall, which could deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix potential double free on mesh join
While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:
ieee80211_leave_mesh()
-> kfree(sdata->u.mesh.ie);
...
ieee80211_join_mesh()
-> copy_mesh_setup()
-> old_ie = ifmsh->ie;
-> kfree(old_ie);
This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:
$ iw dev mesh0 mesh leave
$ iw dev mesh0 mesh join my-mesh
Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.
The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.
Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pl031: fix rtc features null pointer dereference
When there is no interrupt line, rtc alarm feature is disabled.
The clearing of the alarm feature bit was being done prior to allocations
of ldata->rtc device, resulting in a null pointer dereference.
Clear RTC_FEATURE_ALARM after the rtc device is allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
ath9k_htc: fix uninit value bugs
Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.
In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.
htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy
Fail logs:
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00 |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: socket: free skb in send6 when ipv6 is disabled
I got a memory leak report:
unreferenced object 0xffff8881191fc040 (size 232):
comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0
[<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340
[<ffffffff832974fb>] __alloc_skb+0x1db/0x200
[<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0
[<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110
[<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30
[<ffffffff8119c558>] process_one_work+0x2e8/0x770
[<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0
[<ffffffff811a88e0>] kthread+0x120/0x160
[<ffffffff8100242f>] ret_from_fork+0x1f/0x30
In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_
buffer_to_peer(), the semantics of send6() is required to free skb. But
when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it
to fix this bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ath11k: mhi: use mhi_sync_power_up()
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
reason for that was that we were using mhi_async_power_up() which does not
check any errors. But mhi_sync_power_up() on the other hand does check for
errors so let's use that to fix the crash.
I was not able to find a reason why an async version was used.
ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from
ath11k_hif_power_up(), which can sleep. So sync version should be safe to use
here.
[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567
[ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
[ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
[ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
[ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
[ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
[ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
[ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
[ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
[ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
[ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
[ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
[ 145.570623] Call Trace:
[ 145.570675] <TASK>
[ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
[ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
[ 145.570864] ? tasklet_init+0x150/0x150
[ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
[ 145.570986] ? tasklet_clear_sched+0x42/0xe0
[ 145.571042] ? tasklet_kill+0xe9/0x1b0
[ 145.571095] ? tasklet_clear_sched+0xe0/0xe0
[ 145.571148] ? irq_has_action+0x120/0x120
[ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
[ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
[ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k]
[ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k]
[ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
[ 145.571553] pci_device_remove+0x9a/0x1c0
[ 145.571605] __device_release_driver+0x332/0x660
[ 145.571659] driver_detach+0x1e7/0x2c0
[ 145.571712] bus_remove_driver+0xe2/0x2d0
[ 145.571772] pci_unregister_driver+0x21/0x250
[ 145.571826] __do_sys_delete_module+0x30a/0x4b0
[ 145.571879] ? free_module+0xac0/0xac0
[ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
[ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50
[ 145.572039] ? lockdep_hardirqs_on+0x79/0x100
[ 145.572097] do_syscall_64+0x3b/0x90
[ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: use memset avoid memory leaks
Use memset to initialize structs to prevent memory leaks
in l2cap_ecred_connect |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()
dev_name() was called with dev.parent as argument but without to
NULL-check it before.
Solve this by checking the pointer before the call to dev_name(). |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: potential buffer overflow in handling symlinks
Smatch printed a warning:
arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error:
__memcpy() 'dctx->buf' too small (16 vs u32max)
It's caused because Smatch marks 'link_len' as untrusted since it comes
from sscanf(). Add a check to ensure that 'link_len' is not larger than
the size of the 'link_str' buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()
If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it
happened in the bug report by syzbot), virtio_gpu_array_put_free() could be
called with objs equal to NULL.
Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise
return from the function. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix missing update of domains_itree after splitting iopt_area
In iopt_area_split(), if the original iopt_area has filled a domain and is
linked to domains_itree, pages_nodes have to be properly
reinserted. Otherwise the domains_itree becomes corrupted and we will UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature
Fix memory corruption due to incorrect parameter being passed to bio_init |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: skip end interval element from gc
rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: fix truesize for mb-xdp-pass case
When mb-xdp is set and return is XDP_PASS, packet is converted from
xdp_buff to sk_buff with xdp_update_skb_shared_info() in
bnxt_xdp_build_skb().
bnxt_xdp_build_skb() passes incorrect truesize argument to
xdp_update_skb_shared_info().
The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but
the skb_shared_info was wiped by napi_build_skb() before.
So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it
instead of getting skb_shared_info from xdp_get_shared_info_from_buff().
Splat looks like:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590
Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms
CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3
RIP: 0010:skb_try_coalesce+0x504/0x590
Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99
RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287
RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0
RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003
RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900
R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740
R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
? __warn+0x84/0x130
? skb_try_coalesce+0x504/0x590
? report_bug+0x18a/0x1a0
? handle_bug+0x53/0x90
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? skb_try_coalesce+0x504/0x590
inet_frag_reasm_finish+0x11f/0x2e0
ip_defrag+0x37a/0x900
ip_local_deliver+0x51/0x120
ip_sublist_rcv_finish+0x64/0x70
ip_sublist_rcv+0x179/0x210
ip_list_rcv+0xf9/0x130
How to reproduce:
<Node A>
ip link set $interface1 xdp obj xdp_pass.o
ip link set $interface1 mtu 9000 up
ip a a 10.0.0.1/24 dev $interface1
<Node B>
ip link set $interfac2 mtu 9000 up
ip a a 10.0.0.2/24 dev $interface2
ping 10.0.0.1 -s 65000
Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be
able to reproduce this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.
The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:
* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en
In both cases the workaround is described as:
| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.
The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".
Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]
This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.
The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:
| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret
The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:
| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.
... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled". |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"
This reverts commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293.
ieee80211_if_free() is already called from free_netdev(ndev)
because ndev->priv_destructor == ieee80211_if_free
syzbot reported:
general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 0 PID: 10041 Comm: syz-executor.0 Not tainted 6.2.0-rc2-syzkaller-00388-g55b98837e37d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:pcpu_get_page_chunk mm/percpu.c:262 [inline]
RIP: 0010:pcpu_chunk_addr_search mm/percpu.c:1619 [inline]
RIP: 0010:free_percpu mm/percpu.c:2271 [inline]
RIP: 0010:free_percpu+0x186/0x10f0 mm/percpu.c:2254
Code: 80 3c 02 00 0f 85 f5 0e 00 00 48 8b 3b 48 01 ef e8 cf b3 0b 00 48 ba 00 00 00 00 00 fc ff df 48 8d 78 20 48 89 f9 48 c1 e9 03 <80> 3c 11 00 0f 85 3b 0e 00 00 48 8b 58 20 48 b8 00 00 00 00 00 fc
RSP: 0018:ffffc90004ba7068 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88823ffe2b80 RCX: 0000000000000004
RDX: dffffc0000000000 RSI: ffffffff81c1f4e7 RDI: 0000000000000020
RBP: ffffe8fffe8fc220 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 1ffffffff2179ab2 R12: ffff8880b983d000
R13: 0000000000000003 R14: 0000607f450fc220 R15: ffff88823ffe2988
FS: 00007fcb349de700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32220000 CR3: 000000004914f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
netdev_run_todo+0x6bf/0x1100 net/core/dev.c:10352
ieee80211_register_hw+0x2663/0x4040 net/mac80211/main.c:1411
mac80211_hwsim_new_radio+0x2537/0x4d80 drivers/net/wireless/mac80211_hwsim.c:4583
hwsim_new_radio_nl+0xa09/0x10f0 drivers/net/wireless/mac80211_hwsim.c:5176
genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356
netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
____sys_sendmsg+0x712/0x8c0 net/socket.c:2476
___sys_sendmsg+0x110/0x1b0 net/socket.c:2530
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2559
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix ib block iterator counter overflow
When registering a new DMA MR after selecting the best aligned page size
for it, we iterate over the given sglist to split each entry to smaller,
aligned to the selected page size, DMA blocks.
In given circumstances where the sg entry and page size fit certain
sizes and the sg entry is not aligned to the selected page size, the
total size of the aligned pages we need to cover the sg entry is >= 4GB.
Under this circumstances, while iterating page aligned blocks, the
counter responsible for counting how much we advanced from the start of
the sg entry is overflowed because its type is u32 and we pass 4GB in
size. This can lead to an infinite loop inside the iterator function
because the overflow prevents the counter to be larger
than the size of the sg entry.
Fix the presented problem by changing the advancement condition to
eliminate overflow.
Backtrace:
[ 192.374329] efa_reg_user_mr_dmabuf
[ 192.376783] efa_register_mr
[ 192.382579] pgsz_bitmap 0xfffff000 rounddown 0x80000000
[ 192.386423] pg_sz [0x80000000] umem_length[0xc0000000]
[ 192.392657] start 0x0 length 0xc0000000 params.page_shift 31 params.page_num 3
[ 192.399559] hp_cnt[3], pages_in_hp[524288]
[ 192.403690] umem->sgt_append.sgt.nents[1]
[ 192.407905] number entries: [1], pg_bit: [31]
[ 192.411397] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.415601] biter->__sg_advance [665837568] sg_dma_len[3221225472]
[ 192.419823] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.423976] biter->__sg_advance [2813321216] sg_dma_len[3221225472]
[ 192.428243] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.432397] biter->__sg_advance [665837568] sg_dma_len[3221225472] |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: close all race conditions in l2tp_tunnel_register()
The code in l2tp_tunnel_register() is racy in several ways:
1. It modifies the tunnel socket _after_ publishing it.
2. It calls setup_udp_tunnel_sock() on an existing socket without
locking.
3. It changes sock lock class on fly, which triggers many syzbot
reports.
This patch amends all of them by moving socket initialization code
before publishing and under sock lock. As suggested by Jakub, the
l2tp lockdep class is not necessary as we can just switch to
bh_lock_sock_nested(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix memory leaks
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or
hci_le_big_terminate(), the memory pointed by variable d is not freed,
which will cause memory leak. Add release process to error path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is
not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR
to pass the instance to callback so no memory needs to be allocated. |
