| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: backend: fix out-of-bound write
The buffer is set to 80 character. If a caller write more characters,
count is truncated to the max available space in "simple_write_to_buffer".
But afterwards a string terminator is written to the buffer at offset count
without boundary check. The zero termination is written OUT-OF-BOUND.
Add a check that the given buffer is smaller then the buffer to prevent. |
| IBM Db2 11.1.0 through 11.1.4.7, 11.5.0 through 11.5.9, and 12.1.0 through 12.1.3 for Linux, UNIX and Windows (includes Db2 Connect Server) is vulnerable to a denial of service as the server may crash under certain conditions with a specially crafted query. |
| An authenticated command injection vulnerability exists in Pi-hole versions up to 3.3. When adding a domain to the allowlist via the web interface, the domain parameter is not properly sanitized, allowing an attacker to append OS commands to the domain string. These commands are executed on the underlying operating system with the privileges of the Pi-hole service user.
This behavior was present in the legacy AdminLTE interface and has since been patched in later versions. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: msu: Fix vmalloced buffers
After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") there's
a chance of DMA buffer getting allocated via vmalloc(), which messes up
the mmapping code:
> RIP: msc_mmap_fault [intel_th_msu]
> Call Trace:
> <TASK>
> __do_fault
> do_fault
...
Fix this by accounting for vmalloc possibility. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers()
The last case label can write two buffers 'mc_reg_address[j]' and
'mc_data[j]' with 'j' offset equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE
since there are no checks for this value in both case labels after the
last 'j++'.
Instead of changing '>' to '>=' there, add the bounds check at the start
of the second 'case' (the first one already has it).
Also, remove redundant last checks for 'j' index bigger than array size.
The expression is always false. Moreover, before or after the patch
'table->last' can be equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE and it
seems it can be a valid value.
Detected using the static analysis tool - Svace. |
| Coolify versions prior to v4.0.0-beta.420.7 are vulnerable to a remote code execution vulnerability in the project deployment workflow. The platform allows authenticated users, with low-level member privileges, to inject arbitrary shell commands via the Git Repository field during project creation. By submitting a crafted repository string containing command injection syntax, an attacker can execute arbitrary commands on the underlying host system, resulting in full server compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not trigger WARN_ON() due to a commit_overrun
When reading a memory mapped buffer the reader page is just swapped out
with the last page written in the write buffer. If the reader page is the
same as the commit buffer (the buffer that is currently being written to)
it was assumed that it should never have missed events. If it does, it
triggers a WARN_ON_ONCE().
But there just happens to be one scenario where this can legitimately
happen. That is on a commit_overrun. A commit overrun is when an interrupt
preempts an event being written to the buffer and then the interrupt adds
so many new events that it fills and wraps the buffer back to the commit.
Any new events would then be dropped and be reported as "missed_events".
In this case, the next page to read is the commit buffer and after the
swap of the reader page, the reader page will be the commit buffer, but
this time there will be missed events and this triggers the following
warning:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1127 at kernel/trace/ring_buffer.c:7357 ring_buffer_map_get_reader+0x49a/0x780
Modules linked in: kvm_intel kvm irqbypass
CPU: 2 UID: 0 PID: 1127 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00004-g478bc2824b45-dirty #564 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ring_buffer_map_get_reader+0x49a/0x780
Code: 00 00 00 48 89 fe 48 c1 ee 03 80 3c 2e 00 0f 85 ec 01 00 00 4d 3b a6 a8 00 00 00 0f 85 8a fd ff ff 48 85 c0 0f 84 55 fe ff ff <0f> 0b e9 4e fe ff ff be 08 00 00 00 4c 89 54 24 58 48 89 54 24 50
RSP: 0018:ffff888121787dc0 EFLAGS: 00010002
RAX: 00000000000006a2 RBX: ffff888100062800 RCX: ffffffff8190cb49
RDX: ffff888126934c00 RSI: 1ffff11020200a15 RDI: ffff8881010050a8
RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffed1024d26982
R10: ffff888126934c17 R11: ffff8881010050a8 R12: ffff888126934c00
R13: ffff8881010050b8 R14: ffff888101005000 R15: ffff888126930008
FS: 00007f95c8cd7540(0000) GS:ffff8882b576e000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95c8de4dc0 CR3: 0000000128452002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __pfx_ring_buffer_map_get_reader+0x10/0x10
tracing_buffers_ioctl+0x283/0x370
__x64_sys_ioctl+0x134/0x190
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f95c8de48db
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00
RSP: 002b:00007ffe037ba110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe037bb2b0 RCX: 00007f95c8de48db
RDX: 0000000000000000 RSI: 0000000000005220 RDI: 0000000000000006
RBP: 00007ffe037ba180 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe037bb6f8 R14: 00007f95c9065000 R15: 00005575c7492c90
</TASK>
irq event stamp: 5080
hardirqs last enabled at (5079): [<ffffffff83e0adb0>] _raw_spin_unlock_irqrestore+0x50/0x70
hardirqs last disabled at (5080): [<ffffffff83e0aa83>] _raw_spin_lock_irqsave+0x63/0x70
softirqs last enabled at (4182): [<ffffffff81516122>] handle_softirqs+0x552/0x710
softirqs last disabled at (4159): [<ffffffff815163f7>] __irq_exit_rcu+0x107/0x210
---[ end trace 0000000000000000 ]---
The above was triggered by running on a kernel with both lockdep and KASAN
as well as kmemleak enabled and executing the following command:
# perf record -o perf-test.dat -a -- trace-cmd record --nosplice -e all -p function hackbench 50
With perf interjecting a lot of interrupts and trace-cmd enabling all
events as well as function tracing, with lockdep, KASAN and kmemleak
enabled, it could cause an interrupt preempting an event being written to
add enough event
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix the using of Rx buffer DMA
The wx_rx_buffer structure contained two DMA address fields: 'dma' and
'page_dma'. However, only 'page_dma' was actually initialized and used
to program the Rx descriptor. But 'dma' was uninitialized and used in
some paths.
This could lead to undefined behavior, including DMA errors or
use-after-free, if the uninitialized 'dma' was used. Althrough such
error has not yet occurred, it is worth fixing in the code. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: prevent a buffer overflow in mcp_smbus_write()
Smatch Warning:
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy()
'&mcp->txbuf[5]' too small (59 vs 255)
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf'
too small (34 vs 255)
The 'len' variable can take a value between 0-255 as it can come from
data->block[0] and it is user data. So add an bound check to prevent a
buffer overflow in memcpy(). |
| OS Command injection vulnerability in function OperateSSH in 1panel 2.0.8 allowing attackers to execute arbitrary commands via the operation parameter to the /api/v2/hosts/ssh/operate endpoint. |
| A stack-based buffer overflow vulnerability was discovered in Tenda AC18 v15.03.05.05_multi. The vulnerability exists in the guestSsid parameter of the /goform/WifiGuestSet interface. Remote attackers can exploit this vulnerability by sending oversized data to the guestSsid parameter, leading to denial of service (device crash) or potential remote code execution. |
| Tenda AX-1803 v1.0.0.1 was discovered to contain a stack overflow via the wanMTU parameter in the sub_4F55C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda AX-1803 v1.0.0.1 was discovered to contain a stack overflow via the time parameter in the SetSysTimeCfg function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda AX3 V16.03.12.10_CN was discovered to contain a stack overflow in the deviceId parameter of the saveParentControlInfo function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Adobe Flash Player versions 29.0.0.171 and earlier have a Stack-based buffer overflow vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix even more out of bound writes from debugfs
CVE-2021-42327 was fixed by:
commit f23750b5b3d98653b31d4469592935ef6364ad67
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix buffer overflow in debugfs
If the user tries to write more than 32 bytes then it results in memory
corruption. Fortunately, this is debugfs so it's limited to root users. |
| Nagios Network Analyzer versions prior to 2024R2.0.1 contain a vulnerability in the LDAP certificate management functionality whereby the certificate removal operation fails to apply adequate input sanitation. An authenticated administrator can trigger command execution on the underlying host in the context of the web application service, resulting in remote code execution with the service's privileges. |
| Nagios XI versions prior to 2026R1 contain a remote code execution vulnerability in the Core Config Manager (CCM) Run Check command. Insufficient validation/escaping of parameters used to build backend command lines allows an authenticated administrator to inject shell metacharacters that are executed on the server. Successful exploitation results in arbitrary command execution with the privileges of the Nagios XI web application user and can be leveraged to gain control of the underlying host operating system. |
| Nagios XI versions prior to 2024R2 contain a command injection vulnerability in the WinRM plugin. Insufficient validation of user-supplied parameters allows an authenticated administrator to inject shell metacharacters that are incorporated into backend command invocations. Successful exploitation enables arbitrary command execution with the privileges of the Nagios XI web application user and can be leveraged to modify configuration, exfiltrate data, disrupt monitoring operations, or execute commands on the underlying host operating system. |
