| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in a debug function for Cisco RCM for Cisco StarOS Software could allow an unauthenticated, remote attacker to perform debug actions that could result in the disclosure of confidential information that should be restricted.
This vulnerability exists because of a debug service that incorrectly listens to and accepts incoming connections. An attacker could exploit this vulnerability by connecting to the debug port and executing debug commands. A successful exploit could allow the attacker to view sensitive debugging information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| Improper input validation in firmware for some Intel(R) CSME may allow a privileged user to potentially enable denial of service via local access. |
| An information disclosure vulnerability exits in Sitecore JSS React Sample Application 11.0.0 - 14.0.1 that may cause page content intended for one user to be shown to another user. |
| Unprotected alternative channel of return branch target prediction in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access. |
| A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.17.0 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.12 (All versions < V10.12.11 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.6 (All versions < V10.6.19 only if the basic authentication mechanism is used by the application), Mendix Runtime V8 (All versions < V8.18.33 only if the basic authentication mechanism is used by the application), Mendix Runtime V9 (All versions < V9.24.31 only if the basic authentication mechanism is used by the application). The authentication mechanism of affected applications contains an observable response discrepancy vulnerability when validating usernames. This could allow unauthenticated remote attackers to distinguish between valid and invalid usernames. |
| Node.js versions which bundle an unpatched version of OpenSSL or run against a dynamically linked version of OpenSSL which are unpatched are vulnerable to the Marvin Attack - https://people.redhat.com/~hkario/marvin/, if PCKS #1 v1.5 padding is allowed when performing RSA descryption using a private key. |
| A vulnerability in the CLI of Cisco FTD Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands with root privileges on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute commands with root privileges on the underlying operating system.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| Certain software builds for the Nokia C200 and Nokia C100 Android devices contain a vulnerable, pre-installed app with a package name of com.tracfone.tfstatus (versionCode='31', versionName='12') that allows local third-party apps to execute arbitrary AT commands in its context (radio user) via AT command injection due to inadequate access control and inadequate input filtering. No permissions or special privileges are necessary to exploit the vulnerability in the com.tracfone.tfstatus app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Nokia C200 (Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_080:user/release-keys and Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_040:user/release-keys) and Nokia C100 (Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_270:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_190:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_130:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_110:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_080:user/release-keys, and Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_050:user/release-keys). This malicious app sends a broadcast Intent to the receiver component named com.tracfone.tfstatus/.TFStatus. This broadcast receiver extracts a string from the Intent and uses it as an extra when it starts the com.tracfone.tfstatus/.TFStatusActivity activity component which uses the externally controlled string as an input to execute an AT command. There are two different injection techniques to successfully inject arbitrary AT commands to execute. |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. |
| A certain software build for the Orbic Maui device (Orbic/RC545L/RC545L:10/ORB545L_V1.4.2_BVZPP/230106:user/release-keys) leaks the IMEI and the ICCID to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the "persist.sys.verizon_test_plan_imei" system property to indirectly obtain the IMEI and reads the "persist.sys.verizon_test_plan_iccid" system property to obtain the ICCID. |
| An issue was discovered in a third-party component related to vendor.gsm.serial, shipped on devices from multiple device manufacturers. Various software builds for the BLU View 2, Boost Mobile Celero 5G, Sharp Rouvo V, Motorola Moto G Pure, Motorola Moto G Power, T-Mobile Revvl 6 Pro 5G, and T-Mobile Revvl V+ 5G devices leak the device serial number to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys); Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys); Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys); Motorola Moto G Pure (motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-2/74844:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-7/5cde8:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-10/d67faa:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-13/b4a29:user/release-keys, motorola/ellis_trac/ellis:12/S3RH32.20-42-10/1c2540:user/release-keys, motorola/ellis_trac/ellis:12/S3RHS32.20-42-13-2-1/6368dd:user/release-keys, motorola/ellis_a/ellis:11/RRH31.Q3-46-50-2/20fec:user/release-keys, motorola/ellis_vzw/ellis:11/RRH31.Q3-46-138/103bd:user/release-keys, motorola/ellis_vzw/ellis:11/RRHS31.Q3-46-138-2/e5502:user/release-keys, and motorola/ellis_vzw/ellis:12/S3RHS32.20-42-10-14-2/5e0b0:user/release-keys); Motorola Moto G Power (motorola/tonga_g/tonga:11/RRQ31.Q3-68-16-2/e5877:user/release-keys and motorola/tonga_g/tonga:12/S3RQS32.20-42-10-6/f876d3:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys); and T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys). This malicious app reads from the "vendor.gsm.serial" system property to indirectly obtain the device serial number. |
| A certain software build for the Sharp Rouvo V device (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys) leaks the Wi-Fi MAC address and the Bluetooth MAC address to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the "ro.boot.wifi_mac" system property to indirectly obtain the Wi-Fi MAC address and reads the "ro.boot.bt_mac" system property to obtain the Bluetooth MAC address. |
| Improper input validation for some some Intel(R) PROSet/Wireless WiFi software for Windows before version 23.20 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| The BGP daemon in Extreme Networks ExtremeXOS (aka EXOS) 30.7.1.1 allows an attacker (who is not on a directly connected network) to cause a denial of service (BGP session reset) because of BGP attribute error mishandling (for attribute 21 and 25). NOTE: the vendor disputes this because it is "evaluating support for RFC 7606 as a future feature" and believes that "customers that have chosen to not require or implement RFC 7606 have done so willingly and with knowledge of what is needed to defend against these types of attacks." |
| Improper input validation for some Intel(R) PROSet/Wireless WiFi software for linux before version 23.20 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in LWS LWS Hide Login allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects LWS Hide Login: from n/a through 2.1.8. |
| Improper input validation in AVSystem Unified Management Platform (UMP) 23.07.0.16567~LTS can result in unauthenticated CPE (Customer Premises Equipment) devices storing arbitrarily large amounts of data during registration. This can potentially lead to DDoS attacks on the application database and, ultimately, affect the entire product. |
| Server receiving a malformed message to create a new connection could lead to an attacker performing remote code execution or causing a failure. See Honeywell Security Notification for recommendations on upgrading and versioning.
|
| A potential security vulnerability has been reported in the system BIOS of certain HP PC products, which might allow memory tampering. HP is releasing mitigation for the potential vulnerability. |
| WordPress Core is vulnerable to Sensitive Information Exposure in versions up to, and including, 6.4.3 via the redirect_guess_404_permalink function. This can allow unauthenticated attackers to expose the slug of a custom post whose 'publicly_queryable' post status has been set to 'false'. |
