| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tesla Wall Connector Content-Length Header Improper Input Validation Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Tesla Wall Connector devices. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of the HTTP Content-Length header. The issue results from the lack of proper validation of user-supplied data, which can result in memory access past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-26300. |
| An issue has been discovered in GitLab CE/EE affecting all versions from 11.1 before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. Improper XPath validation allows modified SAML response to bypass 2FA requirement under specialized conditions. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series with MPC10/11 or LC9600, MX304, and Junos OS Evolved on ACX Series and PTX Series allows an unauthenticated, network based attacker to cause a Denial-of-Service (DoS).
This issue can occur in two scenarios:
1. If a device, which is configured with SFLOW and ECMP, receives specific valid transit traffic, which is subject to sampling, the packetio process crashes, which in turn leads to an evo-aftman crash and causes the FPC to stop working until it is restarted. (This scenario is only applicable to PTX but not to ACX or MX.)
2. If a device receives a malformed CFM packet on an interface configured with CFM, the packetio process crashes, which in turn leads to an evo-aftman crash and causes the FPC to stop working until it is restarted. Please note that the CVSS score is for the formally more severe issue 1.
The CVSS score for scenario 2. is: 6.5 (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)
This issue affects Junos OS:
* All versions before 21.2R3-S4,
* 21.4 versions before 21.4R2,
* 22.2 versions before 22.2R3-S2;
Junos OS Evolved:
* All versions before 21.2R3-S8-EVO,
* 21.4 versions before 21.4R2-EVO. |
| IBM QRadar Suite Software 1.10.12.0 through 1.10.21.0 and IBM Cloud Pak for Security 1.10.12.0 through 1.10.21.0 could allow an authenticated user to execute certain arbitrary commands due to improper input validation. IBM X-Force ID: 272087. |
| Arbitrary file read in NetScaler Console and NetScaler SDX (SVM) |
| A flaw was found in pdfTeX. Insufficient sanitizing in the TeX notation filter resulted in an arbitrary file read risk on sites where pdfTeX is available, such as those with TeX Live installed. |
| A vulnerability in the implementation of the Simple Network Management Protocol Version 3 (SNMPv3) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to poll an affected device using SNMP, even if the device is configured to deny SNMP traffic from an unauthorized source or the SNMPv3 username is removed from the configuration.
This vulnerability exists because of the way that the SNMPv3 configuration is stored in the Cisco IOS Software and Cisco IOS XE Software startup configuration. An attacker could exploit this vulnerability by polling an affected device from a source address that should have been denied. A successful exploit could allow the attacker to perform SNMP operations from a source that should be denied.
Note: The attacker has no control of the SNMPv3 configuration. To exploit this vulnerability, the attacker must have valid SNMPv3 user credentials.
For more information, see the section of this advisory. |
| A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM). |
| A vulnerability in the Dynamic Access Policies (DAP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly. To exploit this vulnerability, an attacker would need valid remote access VPN user credentials on the affected device.
This vulnerability is due to improper validation of data in HTTPS POST requests. An attacker could exploit this vulnerability by sending a crafted HTTPS POST request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. |
| Eclipse Jetty is a lightweight, highly scalable, Java-based web server and Servlet engine . It includes a utility class, HttpURI, for URI/URL parsing.
The HttpURI class does insufficient validation on the authority segment of a URI. However the behaviour of HttpURI
differs from the common browsers in how it handles a URI that would be
considered invalid if fully validated against the RRC. Specifically HttpURI
and the browser may differ on the value of the host extracted from an
invalid URI and thus a combination of Jetty and a vulnerable browser may
be vulnerable to a open redirect attack or to a SSRF attack if the URI
is used after passing validation checks. |
| An issue was discovered in Samsung Mobile Processor and Wearable Processor Exynos 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, Modem 5123, and Modem 5300. The baseband software does not properly check the length specified by the MM (Mobility Management) module, which can lead to Denial of Service. |
| Improper Validation of Unsafe Equivalence in punycode by the idna crate from Servo rust-url allows an attacker to create a punycode hostname that one part of a system might treat as distinct while another part of that system would treat as equivalent to another hostname. |
| vLLM is an inference and serving engine for large language models (LLMs). In versions starting from 0.7.0 to before 0.9.0, in the file vllm/multimodal/hasher.py, the MultiModalHasher class has a security and data integrity issue in its image hashing method. Currently, it serializes PIL.Image.Image objects using only obj.tobytes(), which returns only the raw pixel data, without including metadata such as the image’s shape (width, height, mode). As a result, two images of different sizes (e.g., 30x100 and 100x30) with the same pixel byte sequence could generate the same hash value. This may lead to hash collisions, incorrect cache hits, and even data leakage or security risks. This issue has been patched in version 0.9.0. |
| A flaw was found in hibernate-validator's 'isValid' method in the org.hibernate.validator.internal.constraintvalidators.hv.SafeHtmlValidator class, which can be bypassed by omitting the tag ending in a less-than character. Browsers may render an invalid html, allowing HTML injection or Cross-Site-Scripting (XSS) attacks. |
|
An Improper Validation of Syntactic Correctness of Input vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS).
On all Junos OS MX Series and SRX Series platforms, when SIP ALG is enabled, and a specific SIP packet is received and processed, NAT IP allocation fails for genuine traffic, which causes Denial of Service (DoS). Continuous receipt of this specific SIP ALG packet will cause a sustained DoS condition.
NAT IP usage can be monitored by running the following command.
user@srx> show security nat resource-usage source-pool <source_pool_name>
Pool name: source_pool_name
..
Address Factor-index Port-range Used Avail Total Usage
X.X.X.X
0 Single Ports 50258 52342 62464 96% <<<<<
- Alg Ports 0 2048 2048 0%
This issue affects:
Juniper Networks Junos OS on MX Series and SRX Series
* All versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S1;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R1-S1, 23.2R2.
|
| Improper Input Validation vulnerability exists in the Hitachi Energy MicroSCADA X SYS600's ICCP stack during the ICCP communication establishment causes a denial-of-service when ICCP of SYS600 is request to forward any data item updates with timestamps too distant in the future to any remote ICCP system. By default, ICCP is not configured and not enabled. This issue affects: Hitachi Energy MicroSCADA X SYS600 version 10.2 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:* |
| Improper input validation in the user management function of web interface in Aten PE6208 2.3.228 and 2.4.232 allows remote authenticated users to cause a partial DoS of web interface via HTTP POST request. |
| Mobile Security Framework (MobSF) is an automated, all-in-one mobile application (Android/iOS/Windows) pen-testing, malware analysis and security assessment framework. According to Apple's documentation for bundle ID's, it must contain only alphanumeric characters (A–Z, a–z, and 0–9), hyphens (-), and periods (.). However, an attacker can manually modify this value in the `Info.plist` file and add special characters to the `<key>CFBundleIdentifier</key>` value. When the application parses the wrong characters in the bundle ID, it encounters an error. As a result, it will not display content and will throw a 500 error instead. The only way to make the pages work again is to manually remove the malicious application from the system. This issue has been addressed in version 4.3.1 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to versions 1.13.5 and 1.14.0, it may happen that policy rules using namespace selector(s) in their match statements are mistakenly not applied during admission review request processing due to a missing error propagation in function `GetNamespaceSelectorsFromNamespaceLister` in `pkg/utils/engine/labels.go`. As a consequence, security-critical mutations and validations are bypassed, potentially allowing attackers with K8s API access to perform malicious operations. This issue has been patched in versions 1.13.5 and 1.14.0. |
| An Unchecked Input for Loop Condition in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to cause IO devices that use the library to enter an infinite loop by sending a malicious RPC packet. |
