| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling. |
| A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov5647: Initialize subdev before controls
In ov5647_init_controls() we call v4l2_get_subdevdata, but it is
initialized by v4l2_i2c_subdev_init() in the probe, which currently
happens after init_controls(). This can result in a segfault if the
error condition is hit, and we try to access i2c_client, so fix the
order. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE
device and then reassigned an ISA device:
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...);
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...);
If the first lookup succeeds but the second fails, dev becomes NULL. This
leads to a potential null-pointer dereference when dev_dbg() is called:
if (errata.piix4.bmisx)
dev_dbg(&dev->dev, ...);
To prevent this, use two temporary pointers and retrieve each device
independently, avoiding overwriting dev with a possible NULL value.
[ rjw: Subject adjustment, added an empty code line ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: restore failed global reservations to subpool
Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool")
fixed an underflow error for hstate->resv_huge_pages caused by incorrectly
attributing globally requested pages to the subpool's reservation.
Unfortunately, this fix also introduced the opposite problem, which would
leave spool->used_hpages elevated if the globally requested pages could
not be acquired. This is because while a subpool's reserve pages only
accounts for what is requested and allocated from the subpool, its "used"
counter keeps track of what is consumed in total, both from the subpool
and globally. Thus, we need to adjust spool->used_hpages in the other
direction, and make sure that globally requested pages are uncharged from
the subpool's used counter.
Each failed allocation attempt increments the used_hpages counter by how
many pages were requested from the global pool. Ultimately, this renders
the subpool unusable, as used_hpages approaches the max limit.
The issue can be reproduced as follows:
1. Allocate 4 hugetlb pages
2. Create a hugetlb mount with max=4, min=2
3. Consume 2 pages globally
4. Request 3 pages from the subpool (2 from subpool + 1 from global)
4.1 hugepage_subpool_get_pages(spool, 3) succeeds.
used_hpages += 3
4.2 hugetlb_acct_memory(h, 1) fails: no global pages left
used_hpages -= 2
5. Subpool now has used_hpages = 1, despite not being able to
successfully allocate any hugepages. It believes it can now only
allocate 3 more hugepages, not 4.
With each failed allocation attempt incrementing the used counter, the
subpool eventually reaches a point where its used counter equals its
max counter. At that point, any future allocations that try to
allocate hugeTLB pages from the subpool will fail, despite the subpool
not having any of its hugeTLB pages consumed by any user.
Once this happens, there is no way to make the subpool usable again,
since there is no way to decrement the used counter as no process is
really consuming the hugeTLB pages.
The underflow issue that the original commit fixes still remains fixed
as well.
Without this fix, used_hpages would keep on leaking if
hugetlb_acct_memory() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: Fix error path in PTP IRQ setup
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: move ext4_percpu_param_init() before ext4_mb_init()
When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the
`DOUBLE_CHECK` macro defined, the following panic is triggered:
==================================================================
EXT4-fs error (device vdc): ext4_validate_block_bitmap:423:
comm mount: bg 0: bad block bitmap checksum
BUG: unable to handle page fault for address: ff110000fa2cc000
PGD 3e01067 P4D 3e02067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W
6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)
RIP: 0010:percpu_counter_add_batch+0x13/0xa0
Call Trace:
<TASK>
ext4_mark_group_bitmap_corrupted+0xcb/0xe0
ext4_validate_block_bitmap+0x2a1/0x2f0
ext4_read_block_bitmap+0x33/0x50
mb_group_bb_bitmap_alloc+0x33/0x80
ext4_mb_add_groupinfo+0x190/0x250
ext4_mb_init_backend+0x87/0x290
ext4_mb_init+0x456/0x640
__ext4_fill_super+0x1072/0x1680
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4f6/0x6b0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
This issue can be reproduced using the following commands:
mkfs.ext4 -F -q -b 1024 /dev/sda 5G
tune2fs -O quota,project /dev/sda
mount /dev/sda /tmp/test
With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads
and validates the block bitmap. When the validation fails,
ext4_mark_group_bitmap_corrupted() attempts to update
sbi->s_freeclusters_counter. However, this percpu_counter has not been
initialized yet at this point, which leads to the panic described above.
Fix this by moving the execution of ext4_percpu_param_init() to occur
before ext4_mb_init(), ensuring the per-CPU counters are initialized
before they are used. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure()
[BUG]
There is a bug report that when btrfs hits ENOSPC error in a critical
path, btrfs flips RO (this part is expected, although the ENOSPC bug
still needs to be addressed).
The problem is after the RO flip, if there is a read repair pending, we
can hit the ASSERT() inside btrfs_repair_io_failure() like the following:
BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1
------------[ cut here ]------------
BTRFS: Transaction aborted (error -28)
WARNING: fs/btrfs/extent-tree.c:3235 at __btrfs_free_extent.isra.0+0x453/0xfd0, CPU#1: btrfs/383844
Modules linked in: kvm_intel kvm irqbypass
[...]
---[ end trace 0000000000000000 ]---
BTRFS info (device vdc state EA): 2 enospc errors during balance
BTRFS info (device vdc state EA): balance: ended with status: -30
BTRFS error (device vdc state EA): parent transid verify failed on logical 30556160 mirror 2 wanted 8 found 6
BTRFS error (device vdc state EA): bdev /dev/nvme0n1 errs: wr 0, rd 0, flush 0, corrupt 10, gen 0
[...]
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
------------[ cut here ]------------
assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938
kernel BUG at fs/btrfs/bio.c:938!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 868 Comm: kworker/u8:13 Tainted: G W N 6.19.0-rc6+ #4788 PREEMPT(full)
Tainted: [W]=WARN, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Workqueue: btrfs-endio simple_end_io_work
RIP: 0010:btrfs_repair_io_failure.cold+0xb2/0x120
RSP: 0000:ffffc90001d2bcf0 EFLAGS: 00010246
RAX: 0000000000000051 RBX: 0000000000001000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8305cf42 RDI: 00000000ffffffff
RBP: 0000000000000002 R08: 00000000fffeffff R09: ffffffff837fa988
R10: ffffffff8327a9e0 R11: 6f69747265737361 R12: ffff88813018d310
R13: ffff888168b8a000 R14: ffffc90001d2bd90 R15: ffff88810a169000
FS: 0000000000000000(0000) GS:ffff8885e752c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
------------[ cut here ]------------
[CAUSE]
The cause of -ENOSPC error during the test case btrfs/124 is still
unknown, although it's known that we still have cases where metadata can
be over-committed but can not be fulfilled correctly, thus if we hit
such ENOSPC error inside a critical path, we have no choice but abort
the current transaction.
This will mark the fs read-only.
The problem is inside the btrfs_repair_io_failure() path that we require
the fs not to be mount read-only. This is normally fine, but if we are
doing a read-repair meanwhile the fs flips RO due to a critical error,
we can enter btrfs_repair_io_failure() with super block set to
read-only, thus triggering the above crash.
[FIX]
Just replace the ASSERT() with a proper return if the fs is already
read-only. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/kbuf: check if target buffer list is still legacy on recycle
There's a gap between when the buffer was grabbed and when it
potentially gets recycled, where if the list is empty, someone could've
upgraded it to a ring provided type. This can happen if the request
is forced via io-wq. The legacy recycling is missing checking if the
buffer_list still exists, and if it's of the correct type. Add those
checks. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix undersized l_iclog_roundoff values
If the superblock doesn't list a log stripe unit, we set the incore log
roundoff value to 512. This leads to corrupt logs and unmountable
filesystems in generic/617 on a disk with 4k physical sectors...
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197.
XFS (sda1): failed to locate log tail
XFS (sda1): log mount/recovery failed: error -74
XFS (sda1): log mount failed
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Ending clean mount
...on the current xfsprogs for-next which has a broken mkfs. xfs_info
shows this...
meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=1 metadir=1
data = bsize=4096 blocks=2579968, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=4096 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=268435456 extents
= zoned=0 start=0 reserved=0
...observe that the log section has sectsz=4096 sunit=0, which means
that the roundoff factor is 512, not 4096 as you'd expect. We should
fix mkfs not to generate broken filesystems, but anyone can fuzz the
ondisk superblock so we should be more cautious. I think the inadequate
logic predates commit a6a65fef5ef8d0, but that's clearly going to
require a different backport. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via
set_capacity_and_notify() without checking if it is NULL.
ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only
assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs
(ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE
handler performs no state validation, a user can trigger a NULL pointer
dereference by sending UPDATE_SIZE to a device that has been added but
not yet started, or one that has been stopped.
Fix this by checking ub->ub_disk under ub->mutex before dereferencing
it, and returning -ENODEV if the disk is not available. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix in-place encryption corruption in SMB2_write()
SMB2_write() places write payload in iov[1..n] as part of rq_iov.
smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message()
encrypts iov[1] in-place, replacing the original plaintext with
ciphertext. On a replayable error, the retry sends the same iov[1]
which now contains ciphertext instead of the original data,
resulting in corruption.
The corruption is most likely to be observed when connections are
unstable, as reconnects trigger write retries that re-send the
already-encrypted data.
This affects SFU mknod, MF symlinks, etc. On kernels before
6.10 (prior to the netfs conversion), sync writes also used
this path and were similarly affected. The async write path
wasn't unaffected as it uses rq_iter which gets deep-copied.
Fix by moving the write payload into rq_iter via iov_iter_kvec(),
so smb3_init_transform_rq() deep-copies it before encryption. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
Call rcu_read_lock() before exiting the loop in
try_release_subpage_extent_buffer() because there is a rcu_read_unlock()
call past the loop.
This has been detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis: Fix NULL pointer dereference in adis_init
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix a few more NULL pointer dereference in device cleanup
I found a few more paths that cleanup fails due to a NULL version pointer
on unsupported hardware.
Add NULL checks as applicable.
(cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential overflow of shmem scatterlist length
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
(cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix NULL pointer dereference in device cleanup
When GPU initialization fails due to an unsupported HW block
IP blocks may have a NULL version pointer. During cleanup in
amdgpu_device_fini_hw, the code calls amdgpu_device_set_pg_state and
amdgpu_device_set_cg_state which iterate over all IP blocks and access
adev->ip_blocks[i].version without NULL checks, leading to a kernel
NULL pointer dereference.
Add NULL checks for adev->ip_blocks[i].version in both
amdgpu_device_set_cg_state and amdgpu_device_set_pg_state to prevent
dereferencing NULL pointers during GPU teardown when initialization has
failed.
(cherry picked from commit b7ac77468cda92eecae560b05f62f997a12fe2f2) |
