| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The MongoDB C Driver's Cyrus SASL integration performs unsafe string copying during username canonicalization, enabling a heap buffer overflow before any authentication or network traffic. This may be triggered by passing untrusted input in the username of a MongoDB URI with authMechanism=GSSAPI. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco 350 Series Managed Switches (SG350) and Cisco 350X Series Stackable Managed Switches (SG350X) firmware could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing response data for a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| gopls by default communicates via pipe. However, -port and -listen flags are supported as means of debugging.
If -listen is given a value without an explicit host (e.g. :8080), or -port is used, gopls will listen on 0.0.0.0.
As a result, users might inadvertently cause gopls to bind 0.0.0.0.
This can allow a malicious party on the same network to execute code arbitrarily via gopls. |
| In versions 3.0.0a1 through 3.2.0 of Mistune, there is a ReDoS (Regular Expression Denial of Service) vulnerability in `LINK_TITLE_RE` that allows an attacker who can supply Markdown for parsing to cause denial of service. The regular expression used for parsing link titles contains overlapping alternatives that can trigger catastrophic backtracking. In both the double-quoted and single-quoted branches, a backslash followed by punctuation can be matched either as an escaped punctuation sequence or as two ordinary characters, creating an ambiguous pattern inside a repeated group. If an attacker supplies Markdown containing repeated ! sequences with no closing quote, the regex engine explores an exponential number of backtracking paths. This is reachable through normal Markdown parsing of inline links and block link reference definitions. A small crafted input can therefore cause significant CPU consumption and make applications using Mistune unresponsive. |
| HTTP.jl provides HTTP client and server functionality for Julia, and URIs.jl parses and works with Uniform Resource Identifiers (URIs). URIs.jl prior to version 1.6.0 and HTTP.jl prior to version 1.10.17 allows the construction of URIs containing CR/LF characters. If user input was not otherwise escaped or protected, this can lead to a CRLF injection attack. Users of HTTP.jl should upgrade immediately to HTTP.jl v1.10.17, and users of URIs.jl should upgrade immediately to URIs.jl v1.6.0. The check for valid URIs is now in the URI.jl package, and the latest version of HTTP.jl incorporates that fix. As a workaround, manually validate any URIs before passing them on to functions in this package. |
| Budibase is an open-source low-code platform. Prior to version 3.35.10, the budibase:auth cookie containing the JWT session token is set with httpOnly: false at packages/backend-core/src/utils/utils.ts:218. JavaScript can read this cookie via document.cookie. This means every XSS becomes a full account takeover — the attacker steals the JWT and has persistent access to the victim's account. The cookie also lacks secure: true (sent over plaintext HTTP) and sameSite attribute. This issue has been patched in version 3.35.10. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
} |
| Improper neutralization of escape, meta, or control sequences in Microsoft Power Apps allows an authorized attacker to perform spoofing over a network. |
| netbox-docker before 2.5.0 has a superuser account with default credentials (admin password for the admin account, and 0123456789abcdef0123456789abcdef01234567 value for SUPERUSER_API_TOKEN). In practice on the public Internet, almost all users changed the password but only about 90% changed the token. Having a default token value was intentional and was valuable for the main intended use case of the netbox-docker product (isolated development networks). Some users engaged in an effort to repurpose netbox-docker for production. The documentation for this effort stated that the defaults must not be used. However, installation did not ensure non-default values. The Supplier was aware of the CVE ID assignment and did not object to the assignment. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, the SbieSvc proxy service's GetRawInputDeviceInfoSlave handler contains two vulnerabilities that can be chained for sandbox escape. First, when a sandboxed process sends an IPC request with cbSize set to 0, up to 32KB of uninitialized stack memory from the service process is returned, leaking return addresses and stack cookies which bypass ASLR and /GS protections. Second, the handler performs a memcpy with an attacker-controlled length without verifying it fits within the 32KB stack buffer, enabling a stack buffer overflow. By chaining the information leak with the overflow, a sandboxed process can execute a ROP chain to achieve SYSTEM privilege escalation, even from a Security Hardened Sandbox. Hardware-enforced shadow stacks (Intel CET) prevent the ROP chain execution but do not mitigate the information leak. This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, the SbieIniServer RunSbieCtrl handler contains a stack buffer overflow. The MSGID_SBIE_INI_RUN_SBIE_CTRL message is handled before normal sandbox and impersonation checks, and for non-sandboxed callers, the handler copies the trailing message payload into a fixed-size WCHAR ctrlCmd[128] stack buffer using memcpy without verifying the length fits within the buffer. The service pipe is created with a NULL DACL, allowing any local interactive process to connect and send an oversized payload to overflow the stack. This can lead to a crash of the SbieSvc service or potential code execution as SYSTEM. This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, several ProcessServer handlers (KillAllHandler, SuspendAllHandler, and RunSandboxedHandler) copy a WCHAR boxname[34] field from request structures into WCHAR[40] stack buffers using wcscpy without verifying null termination. Because the service pipe accepts variable-length packets larger than the request structure, an attacker can fill the boxname field with non-zero data and append additional controlled wide characters after the structure. wcscpy then reads past the fixed field and overflows the destination stack buffer. The service pipe is created with a NULL DACL, allowing any local process to connect, and the unsafe copy occurs before authorization checks. This can lead to a crash of the SbieSvc service or potential code execution as SYSTEM. This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, NamedPipeServer::OpenHandler copies the server field from NAMED_PIPE_OPEN_REQ into a fixed WCHAR pipename[160] stack buffer using wcscat without verifying null termination. The handler only enforces a minimum packet size, and since the service pipe accepts variable-length messages, a sandboxed caller can fill the server[48] field with non-zero data and append additional controlled wide characters after the structure. wcscat then reads past the fixed field and overflows the stack buffer in the SYSTEM service. This message is restricted to sandboxed callers, making it a sandbox escape vector. This can lead to a crash of the SbieSvc service or potential code execution as SYSTEM. This issue has been fixed in version 1.17.3. |
| GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. Prior to version 4.3.0, a remote Denial of Service (DoS) vulnerability exists in GoBGP where a malformed BGP UPDATE message can trigger a runtime error: index out of range panic. This occurs during the processing of 4-byte AS attributes when the message structure causes an internal slice index shift that is not properly handled. This issue has been patched in version 4.3.0. |
| A maliciously crafted CATPART file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| Improper neutralization of special elements in .NET allows an unauthorized attacker to perform spoofing over a network. |
| A maliciously crafted CATPART file, when parsed through certain Autodesk products, can force a Memory corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted MODEL file, when parsed through certain Autodesk products, can force a Memory corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted MODEL file, when parsed through certain Autodesk products, can force a Memory corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted CATPRODUCT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
