| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
page_pool: Fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
Helge reported that the introduction of PP_MAGIC_MASK let to crashes on
boot on his 32-bit parisc machine. The cause of this is the mask is set
too wide, so the page_pool_page_is_pp() incurs false positives which
crashes the machine.
Just disabling the check in page_pool_is_pp() will lead to the page_pool
code itself malfunctioning; so instead of doing this, this patch changes
the define for PP_DMA_INDEX_BITS to avoid mistaking arbitrary kernel
pointers for page_pool-tagged pages.
The fix relies on the kernel pointers that alias with the pp_magic field
always being above PAGE_OFFSET. With this assumption, we can use the
lowest bit of the value of PAGE_OFFSET as the upper bound of the
PP_DMA_INDEX_MASK, which should avoid the false positives.
Because we cannot rely on PAGE_OFFSET always being a compile-time
constant, nor on it always being >0, we fall back to disabling the
dma_index storage when there are not enough bits available. This leaves
us in the situation we were in before the patch in the Fixes tag, but
only on a subset of architecture configurations. This seems to be the
best we can do until the transition to page types in complete for
page_pool pages.
v2:
- Make sure there's at least 8 bits available and that the PAGE_OFFSET
bit calculation doesn't wrap |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: reject negative file sizes in squashfs_read_inode()
Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs.
This warning is ultimately caused because the underlying Squashfs file
system returns a file with a negative file size.
This commit checks for a negative file size and returns EINVAL.
[phillip@squashfs.org.uk: only need to check 64 bit quantity] |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit()
path is very broken.
sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct
itself. If tsk != current and tsk is not a leader, this process can exit/exec
and task_lock(tsk->group_leader) may use the already freed task_struct.
Another problem is that sys_prlimit64() can race with mt-exec which changes
->group_leader. In this case do_prlimit() may take the wrong lock, or (worse)
->group_leader may change between task_lock() and task_unlock().
Change sys_prlimit64() to take tasklist_lock when necessary. This is not
nice, but I don't see a better fix for -stable. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Rework user message limit handling
The limit on the number of user messages had a number of issues,
improper counting in some cases and a use after free.
Restructure how this is all done to handle more in the receive message
allocation routine, so all refcouting and user message limit counts
are done in that routine. It's a lot cleaner and safer. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid potential out-of-bounds in btrfs_encode_fh()
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_objref: validate objref and objrefmap expressions
Referencing a synproxy stateful object from OUTPUT hook causes kernel
crash due to infinite recursive calls:
BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)
[...]
Call Trace:
__find_rr_leaf+0x99/0x230
fib6_table_lookup+0x13b/0x2d0
ip6_pol_route+0xa4/0x400
fib6_rule_lookup+0x156/0x240
ip6_route_output_flags+0xc6/0x150
__nf_ip6_route+0x23/0x50
synproxy_send_tcp_ipv6+0x106/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
nft_synproxy_do_eval+0x263/0x310
nft_do_chain+0x5a8/0x5f0 [nf_tables
nft_do_chain_inet+0x98/0x110
nf_hook_slow+0x43/0xc0
__ip6_local_out+0xf0/0x170
ip6_local_out+0x17/0x70
synproxy_send_tcp_ipv6+0x1a2/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
[...]
Implement objref and objrefmap expression validate functions.
Currently, only NFT_OBJECT_SYNPROXY object type requires validation.
This will also handle a jump to a chain using a synproxy object from the
OUTPUT hook.
Now when trying to reference a synproxy object in the OUTPUT hook, nft
will produce the following error:
synproxy_crash.nft: Error: Could not process rule: Operation not supported
synproxy name mysynproxy
^^^^^^^^^^^^^^^^^^^^^^^^ |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try()
v4l2_subdev_call_state_try() macro allocates a subdev state with
__v4l2_subdev_state_alloc(), but does not check the returned value. If
__v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would
cause v4l2_subdev_call_state_try() to crash.
Add proper error handling to v4l2_subdev_call_state_try(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: fix module removal if firmware download failed
Fix remove if firmware failed to load:
qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2
qcom-iris aa00000.video-codec: firmware download failed
qcom-iris aa00000.video-codec: core init failed
then:
$ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind
Triggers:
genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
video_cc_mvs0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
video_cc_mvs0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
gcc_video_axi0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
------------[ cut here ]------------
gcc_video_axi0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
Skip deinit if initialization never succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
Currently, damon_destroy_scheme() only cleans up the filter list but
leaves ops_filter untouched, which could lead to memory leaks when a
scheme is destroyed.
This patch ensures both filter and ops_filter are properly freed in
damon_destroy_scheme(), preventing potential memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leak of qgroup_list in btrfs_add_qgroup_relation
When btrfs_add_qgroup_relation() is called with invalid qgroup levels
(src >= dst), the function returns -EINVAL directly without freeing the
preallocated qgroup_list structure passed by the caller. This causes a
memory leak because the caller unconditionally sets the pointer to NULL
after the call, preventing any cleanup.
The issue occurs because the level validation check happens before the
mutex is acquired and before any error handling path that would free
the prealloc pointer. On this early return, the cleanup code at the
'out' label (which includes kfree(prealloc)) is never reached.
In btrfs_ioctl_qgroup_assign(), the code pattern is:
prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL);
ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc);
prealloc = NULL; // Always set to NULL regardless of return value
...
kfree(prealloc); // This becomes kfree(NULL), does nothing
When the level check fails, 'prealloc' is never freed by either the
callee or the caller, resulting in a 64-byte memory leak per failed
operation. This can be triggered repeatedly by an unprivileged user
with access to a writable btrfs mount, potentially exhausting kernel
memory.
Fix this by freeing prealloc before the early return, ensuring prealloc
is always freed on all error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: video: Fix use-after-free in acpi_video_switch_brightness()
The switch_brightness_work delayed work accesses device->brightness
and device->backlight, freed by acpi_video_dev_unregister_backlight()
during device removal.
If the work executes after acpi_video_bus_unregister_backlight()
frees these resources, it causes a use-after-free when
acpi_video_switch_brightness() dereferences device->brightness or
device->backlight.
Fix this by calling cancel_delayed_work_sync() for each device's
switch_brightness_work in acpi_video_bus_remove_notify_handler()
after removing the notify handler that queues the work. This ensures
the work completes before the memory is freed.
[ rjw: Changelog edit ] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix refcount leak in nfsd_set_fh_dentry()
nfsd exports a "pseudo root filesystem" which is used by NFSv4 to find
the various exported filesystems using LOOKUP requests from a known root
filehandle. NFSv3 uses the MOUNT protocol to find those exported
filesystems and so is not given access to the pseudo root filesystem.
If a v3 (or v2) client uses a filehandle from that filesystem,
nfsd_set_fh_dentry() will report an error, but still stores the export
in "struct svc_fh" even though it also drops the reference (exp_put()).
This means that when fh_put() is called an extra reference will be dropped
which can lead to use-after-free and possible denial of service.
Normal NFS usage will not provide a pseudo-root filehandle to a v3
client. This bug can only be triggered by the client synthesising an
incorrect filehandle.
To fix this we move the assignments to the svc_fh later, after all
possible error cases have been detected. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: fix crash in set_mesh_sync and set_mesh_complete
There is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due to
memcpy from badly declared on-stack flexible array.
Another crash is in set_mesh_complete() due to double list_del via
mgmt_pending_valid + mgmt_pending_remove.
Use DEFINE_FLEX to declare the flexible array right, and don't memcpy
outside bounds.
As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free,
and also report status on error. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Initialise scc_index in unix_add_edge().
Quang Le reported that the AF_UNIX GC could garbage-collect a
receive queue of an alive in-flight socket, with a nice repro.
The repro consists of three stages.
1)
1-a. Create a single cyclic reference with many sockets
1-b. close() all sockets
1-c. Trigger GC
2)
2-a. Pass sk-A to an embryo sk-B
2-b. Pass sk-X to sk-X
2-c. Trigger GC
3)
3-a. accept() the embryo sk-B
3-b. Pass sk-B to sk-C
3-c. close() the in-flight sk-A
3-d. Trigger GC
As of 2-c, sk-A and sk-X are linked to unix_unvisited_vertices,
and unix_walk_scc() groups them into two different SCCs:
unix_sk(sk-A)->vertex->scc_index = 2 (UNIX_VERTEX_INDEX_START)
unix_sk(sk-X)->vertex->scc_index = 3
Once GC completes, unix_graph_grouped is set to true.
Also, unix_graph_maybe_cyclic is set to true due to sk-X's
cyclic self-reference, which makes close() trigger GC.
At 3-b, unix_add_edge() allocates unix_sk(sk-B)->vertex and
links it to unix_unvisited_vertices.
unix_update_graph() is called at 3-a. and 3-b., but neither
unix_graph_grouped nor unix_graph_maybe_cyclic is changed
because both sk-B's listener and sk-C are not in-flight.
3-c decrements sk-A's file refcnt to 1.
Since unix_graph_grouped is true at 3-d, unix_walk_scc_fast()
is finally called and iterates 3 sockets sk-A, sk-B, and sk-X:
sk-A -> sk-B (-> sk-C)
sk-X -> sk-X
This is totally fine. All of them are not yet close()d and
should be grouped into different SCCs.
However, unix_vertex_dead() misjudges that sk-A and sk-B are
in the same SCC and sk-A is dead.
unix_sk(sk-A)->scc_index == unix_sk(sk-B)->scc_index <-- Wrong!
&&
sk-A's file refcnt == unix_sk(sk-A)->vertex->out_degree
^-- 1 in-flight count for sk-B
-> sk-A is dead !?
The problem is that unix_add_edge() does not initialise scc_index.
Stage 1) is used for heap spraying, making a newly allocated
vertex have vertex->scc_index == 2 (UNIX_VERTEX_INDEX_START)
set by unix_walk_scc() at 1-c.
Let's track the max SCC index from the previous unix_walk_scc()
call and assign the max + 1 to a new vertex's scc_index.
This way, we can continue to avoid Tarjan's algorithm while
preventing misjudgments. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: delete x->tunnel as we delete x
The ipcomp fallback tunnels currently get deleted (from the various
lists and hashtables) as the last user state that needed that fallback
is destroyed (not deleted). If a reference to that user state still
exists, the fallback state will remain on the hashtables/lists,
triggering the WARN in xfrm_state_fini. Because of those remaining
references, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_state
synchronously on net exit path") is not complete.
We recently fixed one such situation in TCP due to defered freeing of
skbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as we
currently drop dst")). This can also happen due to IP reassembly: skbs
with a secpath remain on the reassembly queue until netns
destruction. If we can't guarantee that the queues are flushed by the
time xfrm_state_fini runs, there may still be references to a (user)
xfrm_state, preventing the timely deletion of the corresponding
fallback state.
Instead of chasing each instance of skbs holding a secpath one by one,
this patch fixes the issue directly within xfrm, by deleting the
fallback state as soon as the last user state depending on it has been
deleted. Destruction will still happen when the final reference is
dropped.
A separate lockdep class for the fallback state is required since
we're going to lock x->tunnel while x is locked. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: don't rely on user vaddr alignment
There is no guaranteed alignment for user pointers, however the
calculation of an offset of the first page into a folio after coalescing
uses some weird bit mask logic, get rid of it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix livelock in synchronous file put from fuseblk workers
I observed a hang when running generic/323 against a fuseblk server.
This test opens a file, initiates a lot of AIO writes to that file
descriptor, and closes the file descriptor before the writes complete.
Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for
responses from the fuseblk server:
# cat /proc/372265/task/372313/stack
[<0>] request_wait_answer+0x1fe/0x2a0 [fuse]
[<0>] __fuse_simple_request+0xd3/0x2b0 [fuse]
[<0>] fuse_do_getattr+0xfc/0x1f0 [fuse]
[<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse]
[<0>] aio_read+0x130/0x1e0
[<0>] io_submit_one+0x542/0x860
[<0>] __x64_sys_io_submit+0x98/0x1a0
[<0>] do_syscall_64+0x37/0xf0
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
But the /weird/ part is that the fuseblk server threads are waiting for
responses from itself:
# cat /proc/372210/task/372232/stack
[<0>] request_wait_answer+0x1fe/0x2a0 [fuse]
[<0>] __fuse_simple_request+0xd3/0x2b0 [fuse]
[<0>] fuse_file_put+0x9a/0xd0 [fuse]
[<0>] fuse_release+0x36/0x50 [fuse]
[<0>] __fput+0xec/0x2b0
[<0>] task_work_run+0x55/0x90
[<0>] syscall_exit_to_user_mode+0xe9/0x100
[<0>] do_syscall_64+0x43/0xf0
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
The fuseblk server is fuse2fs so there's nothing all that exciting in
the server itself. So why is the fuse server calling fuse_file_put?
The commit message for the fstest sheds some light on that:
"By closing the file descriptor before calling io_destroy, you pretty
much guarantee that the last put on the ioctx will be done in interrupt
context (during I/O completion).
Aha. AIO fgets a new struct file from the fd when it queues the ioctx.
The completion of the FUSE_WRITE command from userspace causes the fuse
server to call the AIO completion function. The completion puts the
struct file, queuing a delayed fput to the fuse server task. When the
fuse server task returns to userspace, it has to run the delayed fput,
which in the case of a fuseblk server, it does synchronously.
Sending the FUSE_RELEASE command sychronously from fuse server threads
is a bad idea because a client program can initiate enough simultaneous
AIOs such that all the fuse server threads end up in delayed_fput, and
now there aren't any threads left to handle the queued fuse commands.
Fix this by only using asynchronous fputs when closing files, and leave
a comment explaining why. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pci: mg4b: fix uninitialized iio scan data
Fix potential leak of uninitialized stack data to userspace by ensuring
that the `scan` structure is zeroed before use. |
