| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ti_fpc202: fix a potential memory leak in probe function
Use for_each_child_of_node_scoped() to simplify the code and ensure the
device node reference is automatically released when the loop scope
ends. |
| A command injection vulnerability exists in the web-based management interface of AOS-8 and AOS-10 Operating Systems. Successful exploitation could allow an authenticated remote attacker to place arbitrary files on the underlying filesystem of the affected device. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tegra-video: Fix memory leak in __tegra_channel_try_format()
The state object allocated by __v4l2_subdev_state_alloc() must be freed
with __v4l2_subdev_state_free() when it is no longer needed.
In __tegra_channel_try_format(), two error paths return directly after
v4l2_subdev_call() fails, without freeing the allocated 'sd_state'
object. This violates the requirement and causes a memory leak.
Fix this by introducing a cleanup label and using goto statements in the
error paths to ensure that __v4l2_subdev_state_free() is always called
before the function returns. |
| In the Linux kernel, the following vulnerability has been resolved:
mux: mmio: fix regmap leak on probe failure
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: fix bitmap leaks
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown. |
| A memory leak exists in Palo Alto Networks PAN-OS software that enables an attacker to send a burst of crafted packets through the firewall that eventually prevents the firewall from processing traffic. This issue applies only to PA-5400 Series devices that are running PAN-OS software with the SSL Forward Proxy feature enabled. |
| Parsing a malicious font file can cause excessive memory allocation. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, several Net::IMAP commands accept a raw string argument that is sent to the server without validation or escaping. If this string is derived from user-controlled input, it may contain contain CRLF sequences, which an attacker can use to inject arbitrary IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4. |
| Allocation of Resources Without Limits or Throttling vulnerability in ninenines cowboy allows denial of service via unbounded buffer accumulation in multipart header parsing.
cowboy_req:read_part/3 in src/cowboy_req.erl accumulates incoming request bytes into a Buffer binary with no upper-bound check. When cow_multipart:parse_headers/2 returns more or {more, Buffer2}, the function reads up to Length bytes (default 64 KB) from the request body and recurses with the enlarged buffer. There is no equivalent of the byte_size(Acc) > Length guard present in the sibling function read_part_body/4. An unauthenticated attacker can send a multipart/form-data request whose body never yields a complete header section — for example, a body that never contains the advertised boundary delimiter, or one whose header lines never contain \r\n\r\n — and force the server process to accumulate memory linearly with the bytes the protocol layer is willing to deliver. A handful of concurrent such uploads is sufficient to exhaust BEAM memory.
This issue affects cowboy from 2.0.0 before 2.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware. |
| D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. Prior to 1.30.4, 2.1.16, 2.4.5, 3.10.5, and 5.7.0, the SpreadsheetML XML reader (Reader\Xml) does not validate the ss:Index row attribute against the maximum allowed row count (AddressRange::MAX_ROW = 1,048,576). An attacker can craft a SpreadsheetML XML file with ss:Index="999999999" on a <Row> element, which inflates the internal cachedHighestRow to ~1 billion. Any subsequent call to getRowIterator() without an explicit end row will attempt to iterate ~1 billion rows, causing CPU exhaustion and denial of service. This vulnerability is fixed in 1.30.4, 2.1.16, 2.4.5, 3.10.5, and 5.7.0. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Prevent interrupt storm on host controller error (HCE)
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC. |
| When BIG-IP DNS is provisioned, a vulnerability exists in an undisclosed iControl REST and BIG-IP TMOS Shell (tmsh) command that may allow an authenticated attacker with the Resource Administrator or Administrator role to execute arbitrary system commands with higher privileges. In Appliance mode deployments, a successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-core: Disable LPM on ST1000DM010-2EP102
According to a user report, the ST1000DM010-2EP102 has problems with LPM,
causing random system freezes. The drive belongs to the same BarraCuda
family as the ST2000DM008-2FR102 which has the same issue. |
| On an HTTP/2 virtual server with Layer 7 DoS Protection configured, undisclosed traffic can result in an increase in memory consumption causing the Traffic Management Microkernel (TMM) process to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in BIG-IP and BIG-IQ systems where a highly privileged, authenticated attacker with at least the Resource Administrator role can create SNMP configuration objects through iControl REST or the TMOS shell (tmsh) resulting in privilege escalation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in BIG-IP systems where a highly privileged, authenticated attacker with at least the Resource Administrator role can modify configuration objects resulting in privilege escalation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When the BIG-IP Configuration utility is configured to use Lightweight Directory Access Protocol (LDAP) authentication, undisclosed traffic can cause the httpd process to exhaust the available file descriptors. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
