| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.
Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.
In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates. Any problematic use-cases would have to be using an "exotic"
curve encoding.
The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.
Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds. Remote code execution
cannot easily be ruled out.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: check if leafidx greater than num leaves per dmap tree
syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater
than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf.
Shaggy:
Modified sanity check to apply to control pages as well as leaf pages. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix out-of-bounds in dbNextAG() and diAlloc()
In dbNextAG() , there is no check for the case where bmp->db_numag is
greater or same than MAXAG due to a polluted image, which causes an
out-of-bounds. Therefore, a bounds check should be added in dbMount().
And in dbNextAG(), a check for the case where agpref is greater than
bmp->db_numag should be added, so an out-of-bounds exception should be
prevented.
Additionally, a check for the case where agno is greater or same than
MAXAG should be added in diAlloc() to prevent out-of-bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: check dot and dotdot of dx_root before making dir indexed
Syzbot reports a issue as follows:
============================================
BUG: unable to handle page fault for address: ffffed11022e24fe
PGD 23ffee067 P4D 23ffee067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 5079 Comm: syz-executor306 Not tainted 6.10.0-rc5-g55027e689933 #0
Call Trace:
<TASK>
make_indexed_dir+0xdaf/0x13c0 fs/ext4/namei.c:2341
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2451
ext4_rename fs/ext4/namei.c:3936 [inline]
ext4_rename2+0x26e5/0x4370 fs/ext4/namei.c:4214
[...]
============================================
The immediate cause of this problem is that there is only one valid dentry
for the block to be split during do_split, so split==0 results in out of
bounds accesses to the map triggering the issue.
do_split
unsigned split
dx_make_map
count = 1
split = count/2 = 0;
continued = hash2 == map[split - 1].hash;
---> map[4294967295]
The maximum length of a filename is 255 and the minimum block size is 1024,
so it is always guaranteed that the number of entries is greater than or
equal to 2 when do_split() is called.
But syzbot's crafted image has no dot and dotdot in dir, and the dentry
distribution in dirblock is as follows:
bus dentry1 hole dentry2 free
|xx--|xx-------------|...............|xx-------------|...............|
0 12 (8+248)=256 268 256 524 (8+256)=264 788 236 1024
So when renaming dentry1 increases its name_len length by 1, neither hole
nor free is sufficient to hold the new dentry, and make_indexed_dir() is
called.
In make_indexed_dir() it is assumed that the first two entries of the
dirblock must be dot and dotdot, so bus and dentry1 are left in dx_root
because they are treated as dot and dotdot, and only dentry2 is moved
to the new leaf block. That's why count is equal to 1.
Therefore add the ext4_check_dx_root() helper function to add more sanity
checks to dot and dotdot before starting the conversion to avoid the above
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
kobject_uevent: Fix OOB access within zap_modalias_env()
zap_modalias_env() wrongly calculates size of memory block to move, so
will cause OOB memory access issue if variable MODALIAS is not the last
one within its @env parameter, fixed by correcting size to memmove. |
| In the Linux kernel, the following vulnerability has been resolved:
x86: stop playing stack games in profile_pc()
The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.
Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.
And the code really does depend on stack layout that is only true in the
simplest of cases. We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:
Assume the lock function has either no stack frame or a copy
of eflags from PUSHF.
which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:
Eflags always has bits 22 and up cleared unlike kernel addresses
but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.
It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].
With no real practical reason for this any more, just remove the code.
Just for historical interest, here's some background commits relating to
this code from 2006:
0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels")
31679f38d886 ("Simplify profile_pc on x86-64")
and a code unification from 2009:
ef4512882dbe ("x86: time_32/64.c unify profile_pc")
but the basics of this thing actually goes back to before the git tree. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix crash while reading debugfs attribute
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't read past the mfuart notifcation
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: Validate length of nl attributes in enic_set_vf_port
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: cadence: fix invalid PDI offset
For some reason, we add an offset to the PDI, presumably to skip the
PDI0 and PDI1 which are reserved for BPT.
This code is however completely wrong and leads to an out-of-bounds
access. We were just lucky so far since we used only a couple of PDIs
and remained within the PDI array bounds.
A Fixes: tag is not provided since there are no known platforms where
the out-of-bounds would be accessed, and the initial code had problems
as well.
A follow-up patch completely removes this useless offset. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: prevent xattr node from overflowing the eraseblock
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bfa: Ensure the copied buf is NUL terminated
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul instead
of memdup_user. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedf: Ensure the copied buf is NUL terminated
Currently, we allocate a count-sized kernel buffer and copy count from
userspace to that buffer. Later, we use kstrtouint on this buffer but we
don't ensure that the string is terminated inside the buffer, this can
lead to OOB read when using kstrtouint. Fix this issue by using
memdup_user_nul instead of memdup_user. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential index out of bounds in color transformation function
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| In MIT Kerberos 5 (aka krb5) before 1.21.3, an attacker can cause invalid memory reads during GSS message token handling by sending message tokens with invalid length fields. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
In dctcp_update_alpha(), we use a module parameter dctcp_shift_g
as follows:
alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g);
...
delivered_ce <<= (10 - dctcp_shift_g);
It seems syzkaller started fuzzing module parameters and triggered
shift-out-of-bounds [0] by setting 100 to dctcp_shift_g:
memcpy((void*)0x20000080,
"/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47);
res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul,
/*flags=*/2ul, /*mode=*/0ul);
memcpy((void*)0x20000000, "100\000", 4);
syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul);
Let's limit the max value of dctcp_shift_g by param_set_uint_minmax().
With this patch:
# echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
# cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g
10
# echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
-bash: echo: write error: Invalid argument
[0]:
UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12
shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int')
CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468
dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143
tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline]
tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948
tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711
tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937
sk_backlog_rcv include/net/sock.h:1106 [inline]
__release_sock+0x20f/0x350 net/core/sock.c:2983
release_sock+0x61/0x1f0 net/core/sock.c:3549
mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907
mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976
__mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072
mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127
inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437
__sock_release net/socket.c:659 [inline]
sock_close+0xc0/0x240 net/socket.c:1421
__fput+0x41b/0x890 fs/file_table.c:422
task_work_run+0x23b/0x300 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x9c8/0x2540 kernel/exit.c:878
do_group_exit+0x201/0x2b0 kernel/exit.c:1027
__do_sys_exit_group kernel/exit.c:1038 [inline]
__se_sys_exit_group kernel/exit.c:1036 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f6c2b5005b6
Code: Unable to access opcode bytes at 0x7f6c2b50058c.
RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6
RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0
R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: avoid out of bounds shift
UBSAN catches undefined behavior in blk-iocost, where sometimes
iocg->delay is shifted right by a number that is too large,
resulting in undefined behavior on some architectures.
[ 186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S E N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x8f/0xe0
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
iocg_kick_delay+0x30b/0x310
ioc_timer_fn+0x2fb/0x1f80
__run_timer_base+0x1b6/0x250
...
Avoid that undefined behavior by simply taking the
"delay = 0" branch if the shift is too large.
I am not sure what the symptoms of an undefined value
delay will be, but I suspect it could be more than a
little annoying to debug. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix not validating setsockopt user input
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578 |
