| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: Fix memory leaks on probe
Handle the error branches to free memory where required.
Addresses-Coverity-ID: 1491825 ("Resource leak") |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
Reset the last_readdir at the same time, and add a comment explaining
why we don't free last_readdir when dir_emit returns false. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix a memory leak in hang state error path
When vc4_save_hang_state() encounters an early return condition, it
returns without freeing the previously allocated `kernel_state`,
leaking memory.
Add the missing kfree() calls by consolidating the early return paths
into a single place. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix memory leak of BO array in hang state
The hang state's BO array is allocated separately with kzalloc() in
vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the
missing kfree() for the BO array before freeing the hang state struct. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: k3-socinfo: Fix regmap leak on probe failure
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'
All error handling paths lead to 'out' where many resources are freed.
Do it as well here instead of a direct return, otherwise 'log', 'ra' and
'log->one_page_buf' (at least) will leak. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: fix acl memory leak of posix_acl_create()
When looking into another nfs xfstests report, I found acl and
default_acl in nfs3_proc_create() and nfs3_proc_mknod() error
paths are possibly leaked. Fix them in advance. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix memory leak on failure path
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pvrusb2: fix URB leak in pvr2_send_request_ex
When pvr2_send_request_ex() submits a write URB successfully but fails to
submit the read URB (e.g. returns -ENOMEM), it returns immediately without
waiting for the write URB to complete. Since the driver reuses the same
URB structure, a subsequent call to pvr2_send_request_ex() attempts to
submit the still-active write URB, triggering a 'URB submitted while
active' warning in usb_submit_urb().
Fix this by ensuring the write URB is unlinked and waited upon if the read
URB submission fails. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix sgtable leak on mapping failures
In an unlikely case when io_populate_area_dma() fails, which could only
happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine,
io_zcrx_map_area() will have an initialised and not freed table. It was
supposed to be cleaned up in the error path, but !is_mapped prevents
that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-keene: fix memory leak in error path
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback
After several commits, the slab memory increases. Some drm_crtc_commit
objects are not freed. The atomic_destroy_state callback only put the
framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function
to put all the objects that are no longer needed.
It has been seen after hours of usage of a graphics application or using
kmemleak:
unreferenced object 0xc63a6580 (size 64):
comm "egt_basic", pid 171, jiffies 4294940784
hex dump (first 32 bytes):
40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:.
8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:.
backtrace (crc c25aa925):
kmemleak_alloc+0x34/0x3c
__kmalloc_cache_noprof+0x150/0x1a4
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak
__radix_tree_create() allocates and links intermediate nodes into the
tree one by one. If a subsequent allocation fails, the already-linked
nodes remain in the tree with no corresponding leaf entry. These orphaned
internal nodes are never reclaimed because radix_tree_for_each_slot()
only visits slots containing leaf values.
The radix_tree API is deprecated in favor of xarray. As suggested by
Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead
of fixing the radix_tree itself [1]. xarray properly handles cleanup of
internal nodes — xa_destroy() frees all internal xarray nodes when the
qrtr_node is released, preventing the leak.
[1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: Fix URB memory leak on submit failure
When usb_submit_urb() fails in usbio_probe(), the previously allocated
URB is never freed, causing a memory leak.
Fix this by jumping to err_free_urb label to properly release the URB
on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: lpvo_usb: fix memory leak on disconnect
The driver iterates over the registered USB interfaces during GPIB
attach and takes a reference to their USB devices until a match is
found. These references are never released which leads to a memory leak
when devices are disconnected.
Fix the leak by dropping the unnecessary references. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124. |
