| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Remove redundant netif_napi_del() call from disconnect path.
A WARN may be triggered in __netif_napi_del_locked() during USB device
disconnect:
WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350
This happens because netif_napi_del() is called in the disconnect path while
NAPI is still enabled. However, it is not necessary to call netif_napi_del()
explicitly, since unregister_netdev() will handle NAPI teardown automatically
and safely. Removing the redundant call avoids triggering the warning.
Full trace:
lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV
lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV
lan78xx 1-1:1.0 enu1: Link is Down
lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350
Modules linked in: flexcan can_dev fuse
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT
Hardware name: SKOV IMX8MP CPU revC - bd500 (DT)
Workqueue: usb_hub_wq hub_event
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __netif_napi_del_locked+0x2b4/0x350
lr : __netif_napi_del_locked+0x7c/0x350
sp : ffffffc085b673c0
x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8
x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb
x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000
x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000
x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028
x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8
x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000
x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001
x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000
Call trace:
__netif_napi_del_locked+0x2b4/0x350 (P)
lan78xx_disconnect+0xf4/0x360
usb_unbind_interface+0x158/0x718
device_remove+0x100/0x150
device_release_driver_internal+0x308/0x478
device_release_driver+0x1c/0x30
bus_remove_device+0x1a8/0x368
device_del+0x2e0/0x7b0
usb_disable_device+0x244/0x540
usb_disconnect+0x220/0x758
hub_event+0x105c/0x35e0
process_one_work+0x760/0x17b0
worker_thread+0x768/0xce8
kthread+0x3bc/0x690
ret_from_fork+0x10/0x20
irq event stamp: 211604
hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98
hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80
softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8
softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20
---[ end trace 0000000000000000 ]---
lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0 |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/gsp: drop WARN_ON in ACPI probes
These WARN_ONs seem to trigger a lot, and we don't seem to have a
plan to fix them, so just drop them, as they are most likely
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return. |
| In the Linux kernel, the following vulnerability has been resolved:
x86: shadow stacks: proper error handling for mmap lock
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisition
The acp3x_5682_init() function did not check the return value of
clk_get(), which could lead to dereferencing error pointers in
rt5682_clk_enable().
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding proper IS_ERR() checks for both clock acquisitions. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Disable preemption between scx_claim_exit() and kicking helper work
scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from
triggering further error handling. After claiming exit, the caller must kick
the helper kthread work which initiates bypass mode and teardown.
If the calling task gets preempted between claiming exit and kicking the
helper work, and the BPF scheduler fails to schedule it back (since error
handling is now disabled), the helper work is never queued, bypass mode
never activates, tasks stop being dispatched, and the system wedges.
Disable preemption across scx_claim_exit() and the subsequent work kicking
in all callers - scx_disable() and scx_vexit(). Add
lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the
requirement. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
Explicitly set/clear CR8 write interception when AVIC is (de)activated to
fix a bug where KVM leaves the interception enabled after AVIC is
activated. E.g. if KVM emulates INIT=>WFS while AVIC is deactivated, CR8
will remain intercepted in perpetuity.
On its own, the dangling CR8 intercept is "just" a performance issue, but
combined with the TPR sync bug fixed by commit d02e48830e3f ("KVM: SVM:
Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active"), the danging
intercept is fatal to Windows guests as the TPR seen by hardware gets
wildly out of sync with reality.
Note, VMX isn't affected by the bug as TPR_THRESHOLD is explicitly ignored
when Virtual Interrupt Delivery is enabled, i.e. when APICv is active in
KVM's world. I.e. there's no need to trigger update_cr8_intercept(), this
is firmly an SVM implementation flaw/detail.
WARN if KVM gets a CR8 write #VMEXIT while AVIC is active, as KVM should
never enter the guest with AVIC enabled and CR8 writes intercepted.
[Squash fix to avic_deactivate_vmcb. - Paolo] |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
contpte_ptep_set_access_flags() compared the gathered ptep_get() value
against the requested entry to detect no-ops. ptep_get() ORs AF/dirty
from all sub-PTEs in the CONT block, so a dirty sibling can make the
target appear already-dirty. When the gathered value matches entry, the
function returns 0 even though the target sub-PTE still has PTE_RDONLY
set in hardware.
For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may
set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered
across the CONT range. But page-table walkers that evaluate each
descriptor individually (e.g. a CPU without DBM support, or an SMMU
without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the
unchanged target sub-PTE, causing an infinite fault loop.
Gathering can therefore cause false no-ops when only a sibling has been
updated:
- write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)
- read faults: target still lacks PTE_AF
Fix by checking each sub-PTE against the requested AF/dirty/write state
(the same bits consumed by __ptep_set_access_flags()), using raw
per-PTE values rather than the gathered ptep_get() view, before
returning no-op. Keep using the raw target PTE for the write-bit unfold
decision.
Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT
range may become the effective cached translation and software must
maintain consistent attributes across the range. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: luo_file: remember retrieve() status
LUO keeps track of successful retrieve attempts on a LUO file. It does so
to avoid multiple retrievals of the same file. Multiple retrievals cause
problems because once the file is retrieved, the serialized data
structures are likely freed and the file is likely in a very different
state from what the code expects.
The retrieve boolean in struct luo_file keeps track of this, and is passed
to the finish callback so it knows what work was already done and what it
has left to do.
All this works well when retrieve succeeds. When it fails,
luo_retrieve_file() returns the error immediately, without ever storing
anywhere that a retrieve was attempted or what its error code was. This
results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace,
but nothing prevents it from trying this again.
The retry is problematic for much of the same reasons listed above. The
file is likely in a very different state than what the retrieve logic
normally expects, and it might even have freed some serialization data
structures. Attempting to access them or free them again is going to
break things.
For example, if memfd managed to restore 8 of its 10 folios, but fails on
the 9th, a subsequent retrieve attempt will try to call
kho_restore_folio() on the first folio again, and that will fail with a
warning since it is an invalid operation.
Apart from the retry, finish() also breaks. Since on failure the
retrieved bool in luo_file is never touched, the finish() call on session
close will tell the file handler that retrieve was never attempted, and it
will try to access or free the data structures that might not exist, much
in the same way as the retry attempt.
There is no sane way of attempting the retrieve again. Remember the error
retrieve returned and directly return it on a retry. Also pass this
status code to finish() so it can make the right decision on the work it
needs to do.
This is done by changing the bool to an integer. A value of 0 means
retrieve was never attempted, a positive value means it succeeded, and a
negative value means it failed and the error code is the value. |
| A flaw was found in the Linux kernel's XFRM ESP-in-TCP subsystem. This vulnerability, known as Fragnesia, allows a local attacker to achieve arbitrary byte writes into the kernel page cache of read-only files. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: macsmc: Initialize mutex
Initialize struct apple_smc's mutex in apple_smc_probe(). Using the
mutex uninitialized surprisingly resulted only in occasional NULL
pointer dereferences in apple_smc_read() calls from the probe()
functions of sub devices. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "media: iris: Add sanity check for stop streaming"
This reverts commit ad699fa78b59241c9d71a8cafb51525f3dab04d4.
Revert the check that skipped stop_streaming when the instance was in
IRIS_INST_ERROR, as it caused multiple regressions:
1. Buffers were not returned to vb2 when the instance was already in
error state, triggering warnings in the vb2 core because buffer
completion was skipped.
2. If a session failed early (e.g. unsupported configuration), the
instance transitioned to IRIS_INST_ERROR. When userspace attempted
to stop streaming for cleanup, stop_streaming was skipped due to the
added check, preventing proper teardown and leaving the firmware
in an inconsistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
Number of MW LUTs depends on NTB configuration and can be set to zero,
in such scenario rounddown_pow_of_two will cause undefined behaviour and
should not be performed.
This patch ensures that rounddown_pow_of_two is called on valid value. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ti_fpc202: fix a potential memory leak in probe function
Use for_each_child_of_node_scoped() to simplify the code and ensure the
device node reference is automatically released when the loop scope
ends. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In nct7363_present_pwm_fanin, it does not release the reference,
causing a resource leak. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix freemap adjustments when adding xattrs to leaf blocks
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix null dereference in find_network
The variable pwlan has the possibility of being NULL when passed into
rtw_free_network_nolock() which would later dereference the variable. |
