| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Use After Free vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an attacker sending a BGP update with a specifically malformed AS PATH to cause rpd to crash, resulting in a Denial of Service (DoS). Continuous receipt of the malformed AS PATH attribute will cause a sustained DoS condition.
On all Junos OS and Junos OS Evolved platforms, the rpd process will crash and restart when a specifically malformed AS PATH is received within a BGP update and traceoptions are enabled.
This issue only affects systems with BGP traceoptions enabled and requires a BGP session to be already established. Systems without BGP traceoptions enabled are not impacted by this issue.
This issue affects:
Junos OS:
* All versions before 21.2R3-S9,
* all versions of 21.4,
* from 22.2 before 22.2R3-S6,
* from 22.4 before 22.4R3-S5,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S4,
* from 24.2 before 24.2R2;
Junos OS Evolved:
* All versions before 22.4R3-S5-EVO,
* from 23.2-EVO before 23.2R2-S3-EVO,
* from 23.4-EVO before 23.4R2-S4-EVO,
* from 24.2-EVO before 24.2R2-EVO.
This is a more complete fix for previously published CVE-2024-39549 (JSA83011). |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Remove device endpoints from bandwidth list when freeing the device
Endpoints are normally deleted from the bandwidth list when they are
dropped, before the virt device is freed.
If xHC host is dying or being removed then the endpoints aren't dropped
cleanly due to functions returning early to avoid interacting with a
non-accessible host controller.
So check and delete endpoints that are still on the bandwidth list when
freeing the virt device.
Solves a list_del corruption kernel crash when unbinding xhci-pci,
caused by xhci_mem_cleanup() when it later tried to delete already freed
endpoints from the bandwidth list.
This only affects hosts that use software bandwidth checking, which
currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) |
| FreeImage 3.18.0 contains a Use After Free in PluginTARGA.cpp;loadRLE(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix slab-use-after-free in decode_session6
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAF
ib_dealloc_device() should be called only after device cleanup. Fix the
dealloc sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:
Cleanup Thread | Worker Thread
sco_sock_release |
sco_sock_close |
__sco_sock_close |
sco_sock_set_timer |
schedule_delayed_work |
sco_sock_kill | (wait a time)
sock_put(sk) //FREE | sco_sock_timeout
| sock_hold(sk) //USE
The KASAN report triggered by POC is shown below:
[ 95.890016] ==================================================================
[ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[ 95.890755] Workqueue: events sco_sock_timeout
[ 95.890755] Call Trace:
[ 95.890755] <TASK>
[ 95.890755] dump_stack_lvl+0x45/0x110
[ 95.890755] print_address_description+0x78/0x390
[ 95.890755] print_report+0x11b/0x250
[ 95.890755] ? __virt_addr_valid+0xbe/0xf0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_report+0x139/0x170
[ 95.890755] ? update_load_avg+0xe5/0x9f0
[ 95.890755] ? sco_sock_timeout+0x5e/0x1c0
[ 95.890755] kasan_check_range+0x2c3/0x2e0
[ 95.890755] sco_sock_timeout+0x5e/0x1c0
[ 95.890755] process_one_work+0x561/0xc50
[ 95.890755] worker_thread+0xab2/0x13c0
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] kthread+0x279/0x300
[ 95.890755] ? pr_cont_work+0x490/0x490
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork+0x34/0x60
[ 95.890755] ? kthread_blkcg+0xa0/0xa0
[ 95.890755] ret_from_fork_asm+0x11/0x20
[ 95.890755] </TASK>
[ 95.890755]
[ 95.890755] Allocated by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] __kasan_kmalloc+0x86/0x90
[ 95.890755] __kmalloc+0x17f/0x360
[ 95.890755] sk_prot_alloc+0xe1/0x1a0
[ 95.890755] sk_alloc+0x31/0x4e0
[ 95.890755] bt_sock_alloc+0x2b/0x2a0
[ 95.890755] sco_sock_create+0xad/0x320
[ 95.890755] bt_sock_create+0x145/0x320
[ 95.890755] __sock_create+0x2e1/0x650
[ 95.890755] __sys_socket+0xd0/0x280
[ 95.890755] __x64_sys_socket+0x75/0x80
[ 95.890755] do_syscall_64+0xc4/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] Freed by task 506:
[ 95.890755] kasan_save_track+0x3f/0x70
[ 95.890755] kasan_save_free_info+0x40/0x50
[ 95.890755] poison_slab_object+0x118/0x180
[ 95.890755] __kasan_slab_free+0x12/0x30
[ 95.890755] kfree+0xb2/0x240
[ 95.890755] __sk_destruct+0x317/0x410
[ 95.890755] sco_sock_release+0x232/0x280
[ 95.890755] sock_close+0xb2/0x210
[ 95.890755] __fput+0x37f/0x770
[ 95.890755] task_work_run+0x1ae/0x210
[ 95.890755] get_signal+0xe17/0xf70
[ 95.890755] arch_do_signal_or_restart+0x3f/0x520
[ 95.890755] syscall_exit_to_user_mode+0x55/0x120
[ 95.890755] do_syscall_64+0xd1/0x1b0
[ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 95.890755]
[ 95.890755] The buggy address belongs to the object at ffff88800c388000
[ 95.890755] which belongs to the cache kmalloc-1k of size 1024
[ 95.890755] The buggy address is located 128 bytes inside of
[ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[ 95.890755]
[ 95.890755] The buggy address belongs to the physical page:
[ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 95.890755] ano
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in error path
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:
BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034
CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.0-debian-1.16.0-5 04/01/2014
Call Trace:
<IRQ>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:377
print_report+0xc4/0x620 linux/mm/kasan/report.c:488
kasan_report+0xda/0x110 linux/mm/kasan/report.c:601
kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183
skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026
skb_release_all linux/net/core/skbuff.c:1094
__kfree_skb linux/net/core/skbuff.c:1108
kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144
kfree_skb linux/./include/linux/skbuff.h:1244
tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186
tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324
tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824
tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159
tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390
udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108
udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186
udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346
__udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422
ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254
dst_input linux/./include/net/dst.h:461
ip_rcv_finish linux/net/ipv4/ip_input.c:449
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534
__netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648
process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976
__napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576
napi_poll linux/net/core/dev.c:6645
net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781
__do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553
do_softirq linux/kernel/softirq.c:454
do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441
</IRQ>
<TASK>
__local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381
local_bh_enable linux/./include/linux/bottom_half.h:33
rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851
__dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378
dev_queue_xmit linux/./include/linux/netdevice.h:3169
neigh_hh_output linux/./include/net/neighbour.h:526
neigh_output linux/./include/net/neighbour.h:540
ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235
__ip_finish_output linux/net/ipv4/ip_output.c:313
__ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295
ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323
NF_HOOK_COND linux/./include/linux/netfilter.h:303
ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433
dst_output linux/./include/net/dst.h:451
ip_local_out linux/net/ipv4/ip_output.c:129
ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492
udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963
udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250
inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850
sock_sendmsg_nosec linux/net/socket.c:730
__sock_sendmsg linux/net/socket.c:745
__sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191
__do_sys_sendto linux/net/socket.c:2203
__se_sys_sendto linux/net/socket.c:2199
__x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199
do_syscall_x64 linux/arch/x86/entry/common.c:52
do_syscall_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: Fix double free in dvb_register_device()
In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().
Fix this by storing NULL to dvb->entity when it is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: Fix UAF in destroy()
Dm_cache also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.
Therefore, cancelling timer again in destroy(). |
| Use After Free vulnerability in Samsung Open Source rLottie allows Remote Code Inclusion.This issue affects rLottie: V0.2. |
| Espressif ESP-IDF USB Host HID (Human Interface Device) Driver allows access to HID devices. Prior to 1.1.0, usb_class_request_get_descriptor() frees and reallocates hid_device->ctrl_xfer when an oversized descriptor is requested but continues to use the stale local pointer, leading to an immediate use-after-free when processing attacker-controlled Report Descriptor lengths. This vulnerability is fixed in 1.1.0. |
| Espressif ESP-IDF USB Host HID (Human Interface Device) Driver allows access to HID devices. Prior to 1.1.0, calls to hid_host_device_close() can free the same usb_transfer_t twice. The USB event callback and user code share the hid_iface_t state without locking, so both can tear down a READY interface simultaneously, corrupting heap metadata inside the ESP USB host stack. This vulnerability is fixed in 1.1.0. |
| The Apache Xerces C++ XML parser on versions 3.0.0 before 3.2.5 contains a use-after-free error triggered during the scanning of external DTDs.
Users are recommended to upgrade to version 3.2.5 which fixes the issue, or mitigate the issue by disabling DTD processing. This can be accomplished via the DOM using a standard parser feature, or via SAX using the XERCES_DISABLE_DTD environment variable.
This issue has been disclosed before as CVE-2018-1311, but unfortunately that advisory incorrectly stated the issue would be fixed in version 3.2.3 or 3.2.4.
|
| A flaw was found in X.Org Server Overlay Window. A Use-After-Free may lead to local privilege escalation. If a client explicitly destroys the compositor overlay window (aka COW), the Xserver would leave a dangling pointer to that window in the CompScreen structure, which will trigger a use-after-free later. |
| Improper service binding configuration in internal service components in HCL BigFix IVR version 4.2 allows a privileged attacker to impact service availability via exposure of administrative services bound to external network interfaces instead of the local authentication interface. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-throttle: Set BIO_THROTTLED when bio has been throttled
1.In current process, all bio will set the BIO_THROTTLED flag
after __blk_throtl_bio().
2.If bio needs to be throttled, it will start the timer and
stop submit bio directly. Bio will submit in
blk_throtl_dispatch_work_fn() when the timer expires.But in
the current process, if bio is throttled. The BIO_THROTTLED
will be set to bio after timer start. If the bio has been
completed, it may cause use-after-free blow.
BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70
Read of size 2 at addr ffff88801b8902d4 by task fio/26380
dump_stack+0x9b/0xce
print_address_description.constprop.6+0x3e/0x60
kasan_report.cold.9+0x22/0x3a
blk_throtl_bio+0x12f0/0x2c70
submit_bio_checks+0x701/0x1550
submit_bio_noacct+0x83/0xc80
submit_bio+0xa7/0x330
mpage_readahead+0x380/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 26380:
kasan_save_stack+0x19/0x40
__kasan_kmalloc.constprop.2+0xc1/0xd0
kmem_cache_alloc+0x146/0x440
mempool_alloc+0x125/0x2f0
bio_alloc_bioset+0x353/0x590
mpage_alloc+0x3b/0x240
do_mpage_readpage+0xddf/0x1ef0
mpage_readahead+0x264/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 0:
kasan_save_stack+0x19/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x1b/0x30
__kasan_slab_free+0x111/0x160
kmem_cache_free+0x94/0x460
mempool_free+0xd6/0x320
bio_free+0xe0/0x130
bio_put+0xab/0xe0
bio_endio+0x3a6/0x5d0
blk_update_request+0x590/0x1370
scsi_end_request+0x7d/0x400
scsi_io_completion+0x1aa/0xe50
scsi_softirq_done+0x11b/0x240
blk_mq_complete_request+0xd4/0x120
scsi_mq_done+0xf0/0x200
virtscsi_vq_done+0xbc/0x150
vring_interrupt+0x179/0x390
__handle_irq_event_percpu+0xf7/0x490
handle_irq_event_percpu+0x7b/0x160
handle_irq_event+0xcc/0x170
handle_edge_irq+0x215/0xb20
common_interrupt+0x60/0x120
asm_common_interrupt+0x1e/0x40
Fix this by move BIO_THROTTLED set into the queue_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()
In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to
fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in
fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io
triggers KASAN use-after-free. To avoid the use-after-free, keep the
reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to
fsl_destroy_mc_io().
This patch needs rework to apply to kernels older than v5.15. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not clean up repair bio if submit fails
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix double free in idxd_setup_wqs()
The clean up in idxd_setup_wqs() has had a couple bugs because the error
handling is a bit subtle. It's simpler to just re-write it in a cleaner
way. The issues here are:
1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when
"conf_dev" hasn't been initialized.
2) If kzalloc_node() fails then again "conf_dev" is invalid. It's
either uninitialized or it points to the "conf_dev" from the
previous iteration so it leads to a double free.
It's better to free partial loop iterations within the loop and then
the unwinding at the end can handle whole loop iterations. I also
renamed the labels to describe what the goto does and not where the goto
was located. |
| In the Linux kernel, the following vulnerability has been resolved:
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can_put_echo_skb() takes ownership of the SKB and it may be freed
during or after the call.
However, xilinx_can xcan_write_frame() keeps using SKB after the call.
Fix that by only calling can_put_echo_skb() after the code is done
touching the SKB.
The tx_lock is held for the entire xcan_write_frame() execution and
also on the can_get_echo_skb() side so the order of operations does not
matter.
An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skb
memory") did not move the can_put_echo_skb() call far enough.
[mkl: add "commit" in front of sha1 in patch description]
[mkl: fix indention] |
