| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure
Avoid potential NULL pointer dereference by checking the return value of
kmalloc and handling allocation failure properly. |
| In the Linux kernel, the following vulnerability has been resolved:
sch_htb: make htb_deactivate() idempotent
Alan reported a NULL pointer dereference in htb_next_rb_node()
after we made htb_qlen_notify() idempotent.
It turns out in the following case it introduced some regression:
htb_dequeue_tree():
|-> fq_codel_dequeue()
|-> qdisc_tree_reduce_backlog()
|-> htb_qlen_notify()
|-> htb_deactivate()
|-> htb_next_rb_node()
|-> htb_deactivate()
For htb_next_rb_node(), after calling the 1st htb_deactivate(), the
clprio[prio]->ptr could be already set to NULL, which means
htb_next_rb_node() is vulnerable here.
For htb_deactivate(), although we checked qlen before calling it, in
case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again
which triggers the warning inside.
To fix the issues here, we need to:
1) Make htb_deactivate() idempotent, that is, simply return if we
already call it before.
2) Make htb_next_rb_node() safe against ptr==NULL.
Many thanks to Alan for testing and for the reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: uefisecapp: fix efivars registration race
Since the conversion to using the TZ allocator, the efivars service is
registered before the memory pool has been allocated, something which
can lead to a NULL-pointer dereference in case of a racing EFI variable
access.
Make sure that all resources have been set up before registering the
efivars. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: address a potential NULL pointer dereference in the GRED scheduler.
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated
Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to
bail out if skb cannot be allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
can: etas_es58x: fix potential NULL pointer dereference on udev->serial
The driver assumed that es58x_dev->udev->serial could never be NULL.
While this is true on commercially available devices, an attacker
could spoof the device identity providing a NULL USB serial number.
That would trigger a NULL pointer dereference.
Add a check on es58x_dev->udev->serial before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix possible crash when setting up bsg fails
If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value.
Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)"
will not be satisfied, preventing execution from entering
bsg_remove_queue(), which could lead to the following crash:
BUG: kernel NULL pointer dereference, address: 000000000000041c
Call Trace:
<TASK>
mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr]
mpi3mr_remove+0x6f/0x340 [mpi3mr]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19d/0x220
unbind_store+0xa4/0xb0
kernfs_fop_write_iter+0x11f/0x200
vfs_write+0x1fc/0x3e0
ksys_write+0x67/0xe0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x78/0xe2 |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized
If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth
from the OPP table but the bandwidth table was not created because the
interconnect properties were missing in the OPP consumer node, the
kernel will crash with:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
...
pc : _read_bw+0x8/0x10
lr : _opp_table_find_key+0x9c/0x174
...
Call trace:
_read_bw+0x8/0x10 (P)
_opp_table_find_key+0x9c/0x174 (L)
_find_key+0x98/0x168
dev_pm_opp_find_bw_ceil+0x50/0x88
...
In order to fix the crash, create an assert function to check
if the bandwidth table was created before trying to get a
bandwidth with _read_bw(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
devm_kstrdup() can return a NULL pointer on failure,but this
returned value in btbcm_get_board_name() is not checked.
Add NULL check in btbcm_get_board_name(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: Fix oops in nfs_netfs_init_request() when copying to cache
When netfslib wants to copy some data that has just been read on behalf of
nfs, it creates a new write request and calls nfs_netfs_init_request() to
initialise it, but with a NULL file pointer. This causes
nfs_file_open_context() to oops - however, we don't actually need the nfs
context as we're only going to write to the cache.
Fix this by just returning if we aren't given a file pointer and emit a
warning if the request was for something other than copy-to-cache.
Further, fix nfs_netfs_free_request() so that it doesn't try to free the
context if the pointer is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci: fix NULL pointer issue on shared irq case
The tcpci_irq() may meet below NULL pointer dereference issue:
[ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
[ 2.641951] status 0x1, 0x37f
[ 2.650659] Mem abort info:
[ 2.656490] ESR = 0x0000000096000004
[ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.665532] SET = 0, FnV = 0
[ 2.668579] EA = 0, S1PTW = 0
[ 2.671715] FSC = 0x04: level 0 translation fault
[ 2.676584] Data abort info:
[ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 2.695284] [0000000000000010] user address but active_mm is swapper
[ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 2.707883] Modules linked in:
[ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4
[ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT)
[ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.732989] pc : tcpci_irq+0x38/0x318
[ 2.736647] lr : _tcpci_irq+0x14/0x20
[ 2.740295] sp : ffff80008324bd30
[ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70
[ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000
[ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000
[ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001
[ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040
[ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a
[ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00
[ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031
[ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002
[ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000
[ 2.814838] Call trace:
[ 2.817273] tcpci_irq+0x38/0x318
[ 2.820583] _tcpci_irq+0x14/0x20
[ 2.823885] irq_thread_fn+0x2c/0xa8
[ 2.827456] irq_thread+0x16c/0x2f4
[ 2.830940] kthread+0x110/0x114
[ 2.834164] ret_from_fork+0x10/0x20
[ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60)
This may happen on shared irq case. Such as two Type-C ports share one
irq. After the first port finished tcpci_register_port(), it may trigger
interrupt. However, if the interrupt comes by chance the 2nd port finishes
devm_request_threaded_irq(), the 2nd port interrupt handler will run at
first. Then the above issue happens due to tcpci is still a NULL pointer
in tcpci_irq() when dereference to regmap.
devm_request_threaded_irq()
<-- port1 irq comes
disable_irq(client->irq);
tcpci_register_port()
This will restore the logic to the state before commit (77e85107a771 "usb:
typec: tcpci: support edge irq").
However, moving tcpci_register_port() earlier creates a problem when use
edge irq because tcpci_init() will be called before
devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to
the hardware to tell it to start generating interrupts but we're not ready
to deal with them yet, then the ALERT events may be missed and ALERT line
will not recover to high level forever. To avoid the issue, this will also
set ALERT_MASK register after devm_request_threaded_irq() return. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM
In some cases, rk_hdptx_phy_runtime_resume() may be invoked before
platform_set_drvdata() is executed in ->probe(), leading to a NULL
pointer dereference when using the return of dev_get_drvdata().
Ensure platform_set_drvdata() is called before devm_pm_runtime_enable(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
If platform_get_resource_byname() fails and returns NULL because DT lacks
an 'mmio' property for the MHI endpoint, dereferencing res->start will
cause a NULL pointer access. Add a check to prevent it.
[kwilczynski: error message update per the review feedback]
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix NULL deref in cleanup_bearer()
syzbot found [1] that after blamed commit, ub->ubsock->sk
was NULL when attempting the atomic_dec() :
atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count);
Fix this by caching the tipc_net pointer.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 0 UID: 0 PID: 5896 Comm: kworker/0:3 Not tainted 6.13.0-rc1-next-20241203-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events cleanup_bearer
RIP: 0010:read_pnet include/net/net_namespace.h:387 [inline]
RIP: 0010:sock_net include/net/sock.h:655 [inline]
RIP: 0010:cleanup_bearer+0x1f7/0x280 net/tipc/udp_media.c:820
Code: 18 48 89 d8 48 c1 e8 03 42 80 3c 28 00 74 08 48 89 df e8 3c f7 99 f6 48 8b 1b 48 83 c3 30 e8 f0 e4 60 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 74 08 48 89 df e8 1a f7 99 f6 49 83 c7 e8 48 8b 1b
RSP: 0018:ffffc9000410fb70 EFLAGS: 00010206
RAX: 0000000000000006 RBX: 0000000000000030 RCX: ffff88802fe45a00
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffc9000410f900
RBP: ffff88807e1f0908 R08: ffffc9000410f907 R09: 1ffff92000821f20
R10: dffffc0000000000 R11: fffff52000821f21 R12: ffff888031d19980
R13: dffffc0000000000 R14: dffffc0000000000 R15: ffff88807e1f0918
FS: 0000000000000000(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ca050b000 CR3: 0000000031c0c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: Fix potential NULL pointer dereference in gpiod_get_label()
In `gpiod_get_label()`, it is possible that `srcu_dereference_check()` may
return a NULL pointer, leading to a scenario where `label->str` is accessed
without verifying if `label` itself is NULL.
This patch adds a proper NULL check for `label` before accessing
`label->str`. The check for `label->str != NULL` is removed because
`label->str` can never be NULL if `label` is not NULL.
This fixes the issue where the label name was being printed as `(efault)`
when dumping the sysfs GPIO file when `label == NULL`. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Use auth only after NULL check in tpm_buf_check_hmac_response()
Dereference auth after NULL check in tpm_buf_check_hmac_response().
Otherwise, unless tpm2_sessions_init() was called, a call can cause NULL
dereference, when TCG_TPM2_HMAC is enabled.
[jarkko: adjusted the commit message.] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix error pbuf checking
Syz reports a problem, which boils down to NULL vs IS_ERR inconsistent
error handling in io_alloc_pbuf_ring().
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__io_remove_buffers+0xac/0x700 io_uring/kbuf.c:341
Call Trace:
<TASK>
io_put_bl io_uring/kbuf.c:378 [inline]
io_destroy_buffers+0x14e/0x490 io_uring/kbuf.c:392
io_ring_ctx_free+0xa00/0x1070 io_uring/io_uring.c:2613
io_ring_exit_work+0x80f/0x8a0 io_uring/io_uring.c:2844
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind()
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().
pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.
Consider the following case:
CPU1 CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
step 1:
mtk_drm_crtc_atomic_flush:
mtk_drm_crtc_update_config(
!!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
pending_needs_vblank set to true,
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip called again,
pending_needs_vblank is still true
//null pointer
Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use. |
