| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in O2OA up to 9.0.0. This impacts an unknown function of the file /x_program_center/jaxrs/mpweixin/check of the component HTTP POST Request Handler. The manipulation leads to xml external entity reference. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in opencc JFlow up to 20260129. This affects the function Imp_Done of the file src/main/java/bp/wf/httphandler/WF_Admin_AttrFlow.java of the component Workflow Engine. This manipulation of the argument File causes xml external entity reference. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| The WebSocket backend uses charging station identifiers to uniquely
associate sessions but allows multiple endpoints to connect using the
same session identifier. This implementation results in predictable
session identifiers and enables session hijacking or shadowing, where
the most recent connection displaces the legitimate charging station and
receives backend commands intended for that station. This vulnerability
may allow unauthorized users to authenticate as other users or enable a
malicious actor to cause a denial-of-service condition by overwhelming
the backend with valid session requests. |
| A vulnerability in the licensing features of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker with administrative privileges to gain access to sensitive information.
This vulnerability is due to improper parsing of XML that is processed by the web-based management interface of Cisco ISE and Cisco ISE-PIC. An attacker could exploit this vulnerability by uploading a malicious file to the application. A successful exploit could allow the attacker to read arbitrary files from the underlying operating system that could include sensitive data that should otherwise be inaccessible even to administrators. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| WebErpMesv2 is a Resource Management and Manufacturing execution system Web for industry. Prior to 1.19, WebErpMesv2 contains a file upload validation bypass vulnerability in multiple controllers that allows authenticated users to upload arbitrary files, including PHP scripts, leading to Remote Code Execution (RCE). This vulnerability is identical in nature to CVE-2025-52130 but exists in different code locations that were not addressed by the original fix. This vulnerability is fixed in 1.19. |
| Copier is a library and CLI app for rendering project templates. Prior to version 9.11.2, Copier suggests that it's safe to generate a project from a safe template, i.e. one that doesn't use unsafe features like custom Jinja extensions which would require passing the `--UNSAFE,--trust` flag. As it turns out, a safe template can currently write to arbitrary directories outside the destination path by using directory a symlink along with `_preserve_symlinks: true` and a generated directory structure whose rendered path is inside the symlinked directory. This way, a malicious template author can create a template that overwrites arbitrary files (according to the user's write permissions), e.g., to cause havoc. Version 9.11.2 patches the issue. |
| Backstage is an open framework for building developer portals, and @backstage/cli-common provides config loading functionality used by the backend and command line interface of Backstage. Prior to version 0.1.17, the `resolveSafeChildPath` utility function in `@backstage/backend-plugin-api`, which is used to prevent path traversal attacks, failed to properly validate symlink chains and dangling symlinks. An attacker could bypass the path validation via symlink chains (creating `link1 → link2 → /outside` where intermediate symlinks eventually resolve outside the allowed directory) and dangling symlinks (creating symlinks pointing to non-existent paths outside the base directory, which would later be created during file operations). This function is used by Scaffolder actions and other backend components to ensure file operations stay within designated directories. This vulnerability is fixed in `@backstage/backend-plugin-api` version 0.1.17. Users should upgrade to this version or later. Some workarounds are available. Run Backstage in a containerized environment with limited filesystem access and/or restrict template creation to trusted users. |
| go-tuf is a Go implementation of The Update Framework (TUF). Starting in version 2.0.0 and prior to version 2.3.1, if the TUF repository (or any of its mirrors) returns invalid TUF metadata JSON (valid JSON but not well formed TUF metadata), the client will panic during parsing, causing a denial of service. The panic happens before any signature is validated. This means that a compromised repository/mirror/cache can DoS clients without having access to any signing key. Version 2.3.1 fixes the issue. No known workarounds are available. |
| A UNIX symbolic link following issue in the jailer component in Firecracker version v1.13.1 and earlier and 1.14.0 on Linux may allow a local host user with write access to the pre-created jailer directories to overwrite arbitrary host files via a symlink attack during the initialization copy at jailer startup, if the jailer is executed with root privileges.
To mitigate this issue, users should upgrade to version v1.13.2 or 1.14.1 or above. |
| AssertJ provides Fluent testing assertions for Java and the Java Virtual Machine (JVM). Starting in version 1.4.0 and prior to version 3.27.7, an XML External Entity (XXE) vulnerability exists in `org.assertj.core.util.xml.XmlStringPrettyFormatter`: the `toXmlDocument(String)` method initializes `DocumentBuilderFactory` with default settings, without disabling DTDs or external entities. This formatter is used by the `isXmlEqualTo(CharSequence)` assertion for `CharSequence` values. An application is vulnerable only when it uses untrusted XML input with either `isXmlEqualTo(CharSequence)` from `org.assertj.core.api.AbstractCharSequenceAssert` or `xmlPrettyFormat(String)` from `org.assertj.core.util.xml.XmlStringPrettyFormatter`. If untrusted XML input is processed by tone of these methods, an attacker couldnread arbitrary local files via `file://` URIs (e.g., `/etc/passwd`, application configuration files); perform Server-Side Request Forgery (SSRF) via HTTP/HTTPS URIs, and/or cause Denial of Service via "Billion Laughs" entity expansion attacks. `isXmlEqualTo(CharSequence)` has been deprecated in favor of XMLUnit in version 3.18.0 and will be removed in version 4.0. Users of affected versions should, in order of preference: replace `isXmlEqualTo(CharSequence)` with XMLUnit, upgrade to version 3.27.7, or avoid using `isXmlEqualTo(CharSequence)` or `XmlStringPrettyFormatter` with untrusted input. `XmlStringPrettyFormatter` has historically been considered a utility for `isXmlEqualTo(CharSequence)` rather than a feature for AssertJ users, so it is deprecated in version 3.27.7 and removed in version 4.0, with no replacement. |
| This High severity XXE (XML External Entity Injection) vulnerability was introduced in version 7.1.0 of Crowd Data Center and Server.
This XXE (XML External Entity Injection) vulnerability, with a CVSS Score of 7.9, allows an authenticated attacker to access local and remote content which has high impact to confidentiality, low impact to integrity, high impact to availability, and requires no user interaction.
Atlassian recommends that Crowd Data Center and Server customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions:
* Crowd Data Center and Server 7.1: Upgrade to a release greater than or equal to 7.1.3
See the release notes (https://confluence.atlassian.com/crowd/crowd-release-notes-199094.html). You can download the latest version of Crowd Data Center and Server from the download center (https://www.atlassian.com/software/crowd/download-archive).
This vulnerability was reported via our Atlassian (Internal) program. |
| A vulnerability was detected in Open5GS up to 2.7.6. The affected element is the function sgwc_s5c_handle_create_bearer_request of the file /src/sgwc/s5c-handler.c of the component CreateBearerRequest Handler. Performing a manipulation results in reachable assertion. Remote exploitation of the attack is possible. The exploit is now public and may be used. To fix this issue, it is recommended to deploy a patch. The issue report is flagged as already-fixed. |
| In Modem, there is a possible system crash due to an uncaught exception. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01738310; Issue ID: MSV-5933. |
| The Open eClass platform (formerly known as GUnet eClass) is a complete course management system. Prior to version 4.2, failure to invalidate active user sessions after a password change allows existing session tokens to remain valid, potentially enabling unauthorized continued access to user accounts. This issue has been patched in version 4.2. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2, the ast_xml_open() function in xml.c parses XML documents using libxml with unsafe parsing options that enable entity expansion and XInclude processing. Specifically, it invokes xmlReadFile() with the XML_PARSE_NOENT flag and later processes XIncludes via xmlXIncludeProcess().If any untrusted or user-supplied XML file is passed to this function, it can allow an attacker to trigger XML External Entity (XXE) or XInclude-based local file disclosure, potentially exposing sensitive files from the host system. This can also be triggered in other cases in which the user is able to supply input in xml format that triggers the asterisk process to parse it. This issue has been patched in versions 20.7-cert9, 20.18.2, 21.12.1, 22.8.2, and 23.2.2. |
| An authorized user may trigger a server crash by running a $geoNear pipeline with certain invalid index hints. |
| CWE-611: Improper Restriction of XML External Entity Reference vulnerability exists that could cause unauthorized disclosure of local files, interaction within the EBO system, or denial of service conditions when a local user uploads a specially crafted TGML graphics file to the EBO server from Workstation. |
| Not properly invalidated session vulnerability in Graylog Web Interface, version 2.2.3, due to incorrect management of session invalidation after new logins. The application generates a new 'sessionId' each time a user authenticates, but does not invalidate previously issued session identifiers, which remain valid even after multiple consecutive logins by the same user. As a result, a stolen or leaked 'sessionId' can continue to be used to authenticate valid requests. Exploiting this vulnerability would allow an attacker with access to the web service/API network (port 9000 or HTTP/S endpoint of the server) to reuse an old session token to gain unauthorized access to the application, interact with the API/web, and compromise the integrity of the affected account. |
| A UNIX Symbolic Link (Symlink) Following vulnerability in the CLI of Juniper Networks Junos OS allows a local, authenticated attacker with low privileges to escalate their privileges to root which will lead to a complete compromise of the system.
When after a user has performed a specific 'file link ...' CLI operation, another user commits (unrelated configuration changes), the first user can login as root.
This issue affects Junos OS:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S3,
* 24.4 versions before 24.4R2-S2,
* 25.2 versions before 25.2R2.
This issue does not affect versions 25.4R1 or later. |
| HyperCloud versions 2.3.5 through 2.6.8 improperly allowed refresh tokens to be used directly for resource access and failed to invalidate previously issued access tokens when a refresh token was used. Because refresh tokens have a significantly longer lifetime (default one year), an authenticated client could use a refresh token in place of an access token to maintain long-term access without token rotation. Additionally, old access tokens remained valid after refresh, enabling concurrent or extended use beyond intended session boundaries. This vulnerability could allow prolonged unauthorized access if a token is disclosed. |
