| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: dealloc repeat_call_control if damon_call() fails
damon_call() for repeat_call_control of DAMON_SYSFS could fail if somehow
the kdamond is stopped before the damon_call(). It could happen, for
example, when te damon context was made for monitroing of a virtual
address processes, and the process is terminated immediately, before the
damon_call() invocation. In the case, the dyanmically allocated
repeat_call_control is not deallocated and leaked.
Fix the leak by deallocating the repeat_call_control under the
damon_call() failure.
This issue is discovered by sashiko [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/stat: deallocate damon_call() failure leaking damon_ctx
damon_stat_start() always allocates the module's damon_ctx object
(damon_stat_context). Meanwhile, if damon_call() in the function fails,
the damon_ctx object is not deallocated. Hence, if the damon_call() is
failed, and the user writes Y to “enabled” again, the previously
allocated damon_ctx object is leaked.
This cannot simply be fixed by deallocating the damon_ctx object when
damon_call() fails. That's because damon_call() failure doesn't guarantee
the kdamond main function, which accesses the damon_ctx object, is
completely finished. In other words, if damon_stat_start() deallocates
the damon_ctx object after damon_call() failure, the not-yet-terminated
kdamond could access the freed memory (use-after-free).
Fix the leak while avoiding the use-after-free by keeping returning
damon_stat_start() without deallocating the damon_ctx object after
damon_call() failure, but deallocating it when the function is invoked
again and the kdamond is completely terminated. If the kdamond is not yet
terminated, simply return -EAGAIN, as the kdamond will soon be terminated.
The issue was discovered [1] by sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix missing runtime PM reference in ccs_mode_store
ccs_mode_store() calls xe_gt_reset() which internally invokes
xe_pm_runtime_get_noresume(). That function requires the caller
to already hold an outer runtime PM reference and warns if none
is held:
[46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection
[46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at
xe_pm_runtime_get_noresume+0x8b/0xc0
Fix this by protecting xe_gt_reset() with the scope-based
guard(xe_pm_runtime)(xe), which is the preferred form when
the reference lifetime matches a single scope.
v2:
- Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng)
- Update commit message accordingly
(cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback to operate on a
torn-down interface, leading to undefined behavior and
potential crashes.
Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()
before calling cfg80211_pmsr_process_abort(). This ensures any
pending or in-progress work is drained before interface teardown
proceeds, preventing the work from invoking the driver abort
callback after the interface is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cp2615: fix serial string NULL-deref at probe
The cp2615 driver uses the USB device serial string as the i2c adapter
name but does not make sure that the string exists.
Verify that the device has a serial number before accessing it to avoid
triggering a NULL-pointer dereference (e.g. with malicious devices). |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: bcm: bcm2835-power: Increase ASB control timeout
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, which is still negligible in the context of a
power domain transition. Also, replace the open-coded ktime_get_ns()/
cpu_relax() polling loop with readl_poll_timeout_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]
The problem is that aql_enable_write() does not serialise concurrent
write()s to the debugfs.
aql_enable_write() checks static_key_false(&aql_disable.key) and
later calls static_branch_inc() or static_branch_dec(), but the
state may change between the two calls.
aql_disable does not need to track inc/dec.
Let's use static_branch_enable() and static_branch_disable().
[0]:
val == 0
WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288
Modules linked in:
CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)
Tainted: [U]=USER, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311
Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00
RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4
RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98
FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline]
__static_key_slow_dec kernel/jump_label.c:321 [inline]
static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336
aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343
short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383
vfs_write+0x2aa/0x1070 fs/read_write.c:684
ksys_pwrite64 fs/read_write.c:793 [inline]
__do_sys_pwrite64 fs/read_write.c:801 [inline]
__se_sys_pwrite64 fs/read_write.c:798 [inline]
__x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f530cf9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010
RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc()
Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2
descriptors looks really wrong, if offset is not zero. What we want to get
for swapping is hva + offset, not hva + offset*8. ;-)
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Require sys_futex_requeue() to have identical flags
Nicholas reported that his LLM found it was possible to create a UaF
when sys_futex_requeue() is used with different flags. The initial
motivation for allowing different flags was the variable sized futex,
but since that hasn't been merged (yet), simply mandate the flags are
identical, as is the case for the old style sys_futex() requeue
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix NULL-deref on disconnect
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on disconnect
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Clear stale exiting pointer in futex_lock_pi() retry path
Fuzzying/stressing futexes triggered:
WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524
When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY
and stores a refcounted task pointer in 'exiting'.
After wait_for_owner_exiting() consumes that reference, the local pointer
is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a
different error, the bogus pointer is passed to wait_for_owner_exiting().
CPU0 CPU1 CPU2
futex_lock_pi(uaddr)
// acquires the PI futex
exit()
futex_cleanup_begin()
futex_state = EXITING;
futex_lock_pi(uaddr)
futex_lock_pi_atomic()
attach_to_pi_owner()
// observes EXITING
*exiting = owner; // takes ref
return -EBUSY
wait_for_owner_exiting(-EBUSY, owner)
put_task_struct(); // drops ref
// exiting still points to owner
goto retry;
futex_lock_pi_atomic()
lock_pi_update_atomic()
cmpxchg(uaddr)
*uaddr ^= WAITERS // whatever
// value changed
return -EAGAIN;
wait_for_owner_exiting(-EAGAIN, exiting) // stale
WARN_ON_ONCE(exiting)
Fix this by resetting upon retry, essentially aligning it with requeue_pi. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: scrub: unlock dquot before early return in quota scrub
xchk_quota_item can return early after calling xchk_fblock_process_error.
When that helper returns false, the function returned immediately without
dropping dq->q_qlock, which can leave the dquot lock held and risk lock
leaks or deadlocks in later quota operations.
Fix this by unlocking dq->q_qlock before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust
kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so
cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this
case so as to make it more robust.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix integer underflow in chain mode
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing NULL checks for kstrdup()
1. Replace "of_find_node_by_path("/")" with "of_root" to avoid multiple
calls to "of_node_put()".
2. Fix a potential kernel oops during early boot when memory allocation
fails while parsing CPU model from device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00usb: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind. |
