| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tabby (formerly Terminus) is a highly configurable terminal emulator. Prior to 1.0.233, since Tabby does not escape control characters from file paths when dragging and dropping a file into it, code execution can be achieved. This vulnerability is fixed in 1.0.233. |
| `gh` is GitHub’s official command line tool. From 1.6.0 to before 2.92.0, a security vulnerability has been identified in GitHub CLI that could allow terminal escape sequence injection when users view GitHub Actions workflow logs using gh run view --log or gh run view --log-failed. The vulnerability stems from the way GitHub CLI handles raw Actions log output. The gh run view --log and gh run view --log-failed commands stream workflow log lines to stdout or the configured pager without sanitizing terminal control sequences. An attacker who can influence GitHub Actions log content, for example via a PR triggered workflow, can embed escape sequences that are replayed in the user's terminal when they inspect the run. Depending on the victim's terminal emulator, injected sequences could change the window title, manipulate on screen content, or in some terminal emulators (such as screen) potentially execute arbitrary commands. This vulnerability is fixed in 2.92.0. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, jq accepts embedded NUL bytes in import paths at the jq-language level, but later resolves those paths through C string operations during module and data-file lookup. This creates a mismatch between the logical import string that policy or audit code may validate and the on-disk path that jq actually opens. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, Top-level jq programs loaded from a file with -f are truncated at the first embedded NUL byte on current upstream HEAD. A crafted filter file such as . followed by \x00 and arbitrary suffix compiles and executes as only the prefix before the NUL. This leaves jq with a post-CVE-2026-33948 prefix/full-buffer mismatch on the compilation path even though the JSON parser path has already been fixed. |
| Pi-hole is a DNS sinkhole that protects devices from unwanted content without installing any client-side software. From 6.0 to before Core 6.4.2 and FTL 6.6.1, two shell scripts executed as root by systemd (pihole-FTL-prestart.sh and pihole-FTL-poststop.sh) read the files.pid path from this config without validation and use it in privileged file operations (install and rm -f). By writing an arbitrary path into files.pid, an attacker with pihole privilege can cause root to delete and then recreate any file on the system outside the ProtectSystem=full-restricted directories, gaining write access to it. On a default Pi-hole installation this yields local privilege escalation to root via SSH authorized keys manipulation. If /root/.ssh/authorized_keys does not exist (default on fresh installs), only ExecStartPre is required. If the file exists, ExecStopPost deletes it first, and the same restart triggers both hooks in sequence. This vulnerability is fixed in Core 6.4.2 and FTL 6.6.1. |
| Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in Apache Tomcat.
Tomcat did not escape ANSI escape sequences in log messages. If Tomcat was running in a console on a Windows operating system, and the console supported ANSI escape sequences, it was possible for an attacker to use a specially crafted URL to inject ANSI escape sequences to manipulate the console and the clipboard and attempt to trick an administrator into running an attacker controlled command. While no attack vector was found, it may have been possible to mount this attack on other operating systems.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.10, from 10.1.0-M1 through 10.1.44, from 9.0.40 through 9.0.108.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.60 though 8.5.100. Other, older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.11 or later, 10.1.45 or later or 9.0.109 or later, which fix the issue. |
| wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users' terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()
Apply the same fix than ones found in :
8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()")
We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.
pskb_inet_may_pull() makes sure the needed headers are in skb->head.
syzbot reported:
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
__ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389
ipgre_rcv net/ipv4/ip_gre.c:411 [inline]
gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447
gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163
ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5534 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
netif_receive_skb_internal net/core/dev.c:5734 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5793
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556
tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
call_write_iter include/linux/fs.h:2087 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xb6b/0x1520 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
__alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590
alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133
alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204
skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909
tun_build_skb drivers/net/tun.c:1686 [inline]
tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
call_write_iter include/linux/fs.h:2087 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xb6b/0x1520 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| An attachment spoofing issue in WhatsApp for Windows prior to v2.3000.1032164386.258709 could have allowed maliciously formatted documents with embedded NUL bytes in the filename to be shown in the application as one type of file but run as an executable when opened. We have not seen evidence of exploitation in the wild. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Improve SCSI abort handling
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler. |
| Improper neutralization of escape, meta, or control sequences in Microsoft Power Apps allows an authorized attacker to perform spoofing over a network. |
| An external configuration control vulnerability in the OpenVPN module of TP-Link AX53 v1.0 allows an authenticated adjacent attacker to read arbitrary files when a malicious configuration file is processed. Successful exploitation may allow unauthorized access to arbitrary files on the device, potentially exposing sensitive information.This issue affects AX53 v1.0: before 1.7.1 Build 20260213. |
| An external control of configuration vulnerability in the OpenVPN module of TP-Link AX53 v1.0 allows an authenticated adjacent attacker to read arbitrary file when a malicious configuration file is processed.
Successful
exploitation may allow unauthorized access to arbitrary files on the device,
potentially exposing sensitive information.This issue affects AX53 v1.0: before 1.7.1 Build 20260213. |
| mutt before 2.3.2 sometimes uses strfcpy instead of memcpy for the IMAP auth_cram MD5 digest. |
| mutt before 2.3.2 does not check for '\0' in url_pct_decode. |
| In KDE KCoreAddons before 6.25, KShell::quoteArgs is intended to safely quote arguments so that they can be passed to a shell command. This parsing does not adequately handle metacharacters, leading to an escape from the shell. All applications relying on this method in a security-critical path to handle user input are affected and could be exploited. In particular, because sendInput() sends a string to a terminal, a control character such as \x01 can be used during injection. |
| OpenClaw before 2026.4.9 contains an environment variable injection vulnerability allowing malicious workspace .env files to set runtime-control variables. Attackers can inject variables affecting update sources, gateway URLs, ClawHub resolution, and browser executable paths to compromise application behavior. |
| Dell PowerScale OneFS, versions 9.10.0.0 through 9.13.1.0, contains an external control of system or configuration setting vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to protection mechanism bypass. |
| http.cookies.Morsel.js_output() returns an inline <script> snippet and only escapes " for JavaScript string context. It does not neutralize the HTML parser-sensitive sequence </script> inside the generated script element. Mitigation base64-encodes the cookie value to disallow escaping using cookie value. |
| OpenClaw before 2026.3.24 contains an environment variable injection vulnerability in the CLI backend runner that allows attackers to inject malicious environment variables through workspace configuration. Attackers can craft malicious workspace configs to inject arbitrary environment variables into the backend process spawning, enabling code execution or sensitive data exposure. |
