| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback
SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using
smp_cond_load_acquire() until the target CPU's kick_sync advances. Because
the irq_work runs in hardirq context, the waiting CPU cannot reschedule and
its own kick_sync never advances. If multiple CPUs form a wait cycle, all
CPUs deadlock.
Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to
force the CPU through do_pick_task_scx(), which queues a balance callback
to perform the wait. The balance callback drops the rq lock and enables
IRQs following the sched_core_balance() pattern, so the CPU can process
IPIs while waiting. The local CPU's kick_sync is advanced on entry to
do_pick_task_scx() and continuously during the wait, ensuring any CPU that
starts waiting for us sees the advancement and cannot form cyclic
dependencies. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.0, the tool_servers and terminal_servers keys in utils/tools.py do use a prefix. When two or more Open WebUI instances share a Redis database (a supported and documented deployment pattern, e.g., for multi-region deployments, blue-green setups, or cluster topologies), the unprefixed keys collide. An admin on Instance A writing to tool_servers overwrites the value read by Instance B — causing Instance B's users to receive Instance A's tool server configuration. This vulnerability is fixed in 0.9.0. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spidev: fix lock inversion between spi_lock and buf_lock
The spidev driver previously used two mutexes, spi_lock and buf_lock,
but acquired them in different orders depending on the code path:
write()/read(): buf_lock -> spi_lock
ioctl(): spi_lock -> buf_lock
This AB-BA locking pattern triggers lockdep warnings and can
cause real deadlocks:
WARNING: possible circular locking dependency detected
spidev_ioctl() -> mutex_lock(&spidev->buf_lock)
spidev_sync_write() -> mutex_lock(&spidev->spi_lock)
*** DEADLOCK ***
The issue is reproducible with a simple userspace program that
performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from
separate threads on the same spidev file descriptor.
Fix this by simplifying the locking model and removing the lock
inversion entirely. spidev_sync() no longer performs any locking,
and all callers serialize access using spi_lock.
buf_lock is removed since its functionality is fully covered by
spi_lock, eliminating the possibility of lock ordering issues.
This removes the lock inversion and prevents deadlocks without
changing userspace ABI or behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Workaround SQM/PSE stalls by disabling sticky
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path
[Why]
The evaluation for whether we need to use the DMUB HW lock isn't the
same as whether we need to unlock which results in a hang when the
fast path is used for ASIC without FAMS support.
[How]
Store a flag that indicates whether we should use the lock and use
that same flag to specify whether unlocking is needed. |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, This vulnerability is fixed in 3.11.2. |
| Object lifecycle issue in Dawn in Google Chrome prior to 148.0.7778.168 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Medium) |
| Object lifecycle issue in WebShare in Google Chrome on Mac prior to 148.0.7778.168 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, the new method neutralizeArraySpeciesBatch works with objects from the other side but can call into this side via getter on the array prototype exposing objects of the wrong side into the sandbox. This can be used to get host objects and get the host Function object. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This vulnerability is fixed in 3.11.2. |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.3, it is possible to catch a host exception using the yield* expression inside an async generator. When the generator is closed using the return function, the value is awaited on and exceptions thrown in the then call will be caught by the runtime and passed to the yield* iterator as the next value. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This vulnerability is fixed in 3.11.3. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del(). |
| Vulnerability in Wikimedia Foundation MediaWiki.
This vulnerability is associated with program files includes/Actions/ActionEntryPoint.Php, includes/Request/FauxResponse.Php.
This issue affects MediaWiki: from * before 1.43.7, 1.44.4, 1.45.2. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"
This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Move vbus draw to workqueue context
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context. |
| Improper initialization in the UEFI firmware for some Intel platforms within Ring 0: Bare Metal OS may allow an information disclosure. System software adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: slub: avoid wake up kswapd in set_track_prepare
set_track_prepare() can incur lock recursion.
The issue is that it is called from hrtimer_start_range_ns
holding the per_cpu(hrtimer_bases)[n].lock, but when enabled
CONFIG_DEBUG_OBJECTS_TIMERS, may wake up kswapd in set_track_prepare,
and try to hold the per_cpu(hrtimer_bases)[n].lock.
Avoid deadlock caused by implicitly waking up kswapd by passing in
allocation flags, which do not contain __GFP_KSWAPD_RECLAIM in the
debug_objects_fill_pool() case. Inside stack depot they are processed by
gfp_nested_mask().
Since ___slab_alloc() has preemption disabled, we mask out
__GFP_DIRECT_RECLAIM from the flags there.
The oops looks something like:
BUG: spinlock recursion on CPU#3, swapper/3/0
lock: 0xffffff8a4bf29c80, .magic: dead4ead, .owner: swapper/3/0, .owner_cpu: 3
Hardware name: Qualcomm Technologies, Inc. Popsicle based on SM8850 (DT)
Call trace:
spin_bug+0x0
_raw_spin_lock_irqsave+0x80
hrtimer_try_to_cancel+0x94
task_contending+0x10c
enqueue_dl_entity+0x2a4
dl_server_start+0x74
enqueue_task_fair+0x568
enqueue_task+0xac
do_activate_task+0x14c
ttwu_do_activate+0xcc
try_to_wake_up+0x6c8
default_wake_function+0x20
autoremove_wake_function+0x1c
__wake_up+0xac
wakeup_kswapd+0x19c
wake_all_kswapds+0x78
__alloc_pages_slowpath+0x1ac
__alloc_pages_noprof+0x298
stack_depot_save_flags+0x6b0
stack_depot_save+0x14
set_track_prepare+0x5c
___slab_alloc+0xccc
__kmalloc_cache_noprof+0x470
__set_page_owner+0x2bc
post_alloc_hook[jt]+0x1b8
prep_new_page+0x28
get_page_from_freelist+0x1edc
__alloc_pages_noprof+0x13c
alloc_slab_page+0x244
allocate_slab+0x7c
___slab_alloc+0x8e8
kmem_cache_alloc_noprof+0x450
debug_objects_fill_pool+0x22c
debug_object_activate+0x40
enqueue_hrtimer[jt]+0xdc
hrtimer_start_range_ns+0x5f8
... |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: prevent softlockup in jbd2_log_do_checkpoint()
Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list()
periodically release j_list_lock after processing a batch of buffers to
avoid long hold times on the j_list_lock. However, since both functions
contend for j_list_lock, the combined time spent waiting and processing
can be significant.
jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when
need_resched() is true to avoid softlockups during prolonged operations.
But jbd2_log_do_checkpoint() only exits its loop when need_resched() is
true, relying on potentially sleeping functions like __flush_batch() or
wait_on_buffer() to trigger rescheduling. If those functions do not sleep,
the kernel may hit a softlockup.
watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373]
CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017
Workqueue: writeback wb_workfn (flush-7:2)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : native_queued_spin_lock_slowpath+0x358/0x418
lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
Call trace:
native_queued_spin_lock_slowpath+0x358/0x418
jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
__jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2]
add_transaction_credits+0x3bc/0x418 [jbd2]
start_this_handle+0xf8/0x560 [jbd2]
jbd2__journal_start+0x118/0x228 [jbd2]
__ext4_journal_start_sb+0x110/0x188 [ext4]
ext4_do_writepages+0x3dc/0x740 [ext4]
ext4_writepages+0xa4/0x190 [ext4]
do_writepages+0x94/0x228
__writeback_single_inode+0x48/0x318
writeback_sb_inodes+0x204/0x590
__writeback_inodes_wb+0x54/0xf8
wb_writeback+0x2cc/0x3d8
wb_do_writeback+0x2e0/0x2f8
wb_workfn+0x80/0x2a8
process_one_work+0x178/0x3e8
worker_thread+0x234/0x3b8
kthread+0xf0/0x108
ret_from_fork+0x10/0x20
So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid
softlockup. |
