Export limit exceeded: 351254 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 80847 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (80847 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-33667 | 2 Openproject, Opf | 2 Openproject, Openproject | 2026-04-28 | 7.4 High |
| OpenProject is an open-source project management application. In versions prior to 17.3.0, 2FA OTP verification in the confirm_otp action of the two_factor_authentication module has no rate limiting, lockout mechanism, or failed-attempt tracking. The existing brute_force_block_after_failed_logins setting only counts password login failures and does not apply to the 2FA verification stage, and neither the fail_login nor stage_failure methods increment any counter, lock the account, or add any delay. With the default TOTP drift window of ±60 seconds allowing approximately 5 valid codes at any time, an attacker who knows a user's password can brute-force the 6-digit TOTP code at roughly 5-10 attempts per second with an expected completion time of approximately 11 hours. The same vulnerability applies to backup code verification. This effectively allows complete 2FA bypass for any account where the password is known. This issue has been fixed in version 17.3.0. | ||||
| CVE-2016-10708 | 5 Canonical, Debian, Netapp and 2 more | 13 Ubuntu Linux, Debian Linux, Cloud Backup and 10 more | 2026-04-28 | 7.5 High |
| sshd in OpenSSH before 7.4 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence NEWKEYS message, as demonstrated by Honggfuzz, related to kex.c and packet.c. | ||||
| CVE-2026-33662 | 2 Linaro, Op-tee | 2 Op-tee, Op-tee Os | 2026-04-28 | 7.5 High |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. From 3.8.0 to 4.10, in the function emsa_pkcs1_v1_5_encode() in core/drivers/crypto/crypto_api/acipher/rsassa.c, the amount of padding needed, "PS size", is calculated by subtracting the size of the digest and other fields required for the EMA-PKCS1-v1_5 encoding from the size of the modulus of the key. By selecting a small enough modulus, this subtraction can overflow. The padding is added as a string of 0xFF bytes with a call to memset(), and an underflowed integer will cause the memset() call to overwrite until OP-TEE crashes. This only affects platforms registering RSA acceleration. | ||||
| CVE-2026-41476 | 1 Deskflow | 1 Deskflow | 2026-04-28 | 8.8 High |
| Deskflow is a keyboard and mouse sharing app. Prior to 1.26.0.138, a remote memory-safety vulnerability in Deskflow's clipboard deserialization allows a connected peer to trigger an out-of-bounds read by sending a malformed clipboard update. The issue is in the implementation of src/lib/deskflow/IClipboard.cpp. This is reachable because ClipboardChunk::assemble() in src/lib/deskflow/ClipboardChunk.cpp validates only the outer clipboard transfer size. It does not validate the internal structure of the serialized clipboard blob, so malformed inner lengths reach IClipboard::unmarshall() unchanged. This vulnerability is fixed in 1.26.0.138. | ||||
| CVE-2026-41477 | 1 Deskflow | 1 Deskflow | 2026-04-28 | 7.8 High |
| Deskflow is a keyboard and mouse sharing app. In 1.20.0, 1.26.0.134, and earlier, Deskflow daemon runs as SYSTEM and exposes an IPC named pipe with WorldAccessOption enabled. The daemon processes privileged commands without authentication, allowing any local unprivileged user to execute arbitrary commands as SYSTEM. Affects both stable v1.20.0 + and Continuous v1.26.0.134 prerelease. | ||||
| CVE-2026-31475 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup. | ||||
| CVE-2026-31502 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: team: fix header_ops type confusion with non-Ethernet ports Similar to commit 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()") team has the same class of header_ops type confusion. For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops directly. When the team device later calls dev_hard_header() or dev_parse_header(), these callbacks can run with the team net_device instead of the real lower device, so netdev_priv(dev) is interpreted as the wrong private type and can crash. The syzbot report shows a crash in bond_header_create(), but the root cause is in team: the topology is gre -> bond -> team, and team calls the inherited header_ops with its own net_device instead of the lower device, so bond_header_create() receives a team device and interprets netdev_priv() as bonding private data, causing a type confusion crash. Fix this by introducing team header_ops wrappers for create/parse, selecting a team port under RCU, and calling the lower device callbacks with port->dev, so each callback always sees the correct net_device context. Also pass the selected lower device to the lower parse callback, so recursion is bounded in stacked non-Ethernet topologies and parse callbacks always run with the correct device context. | ||||
| CVE-2026-41502 | 1 Bacnetstack | 1 Bacnet Stack | 2026-04-28 | 7.5 High |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to 1.4.3, an off-by-one out-of-bounds read vulnerability in bacnet-stack's ReadPropertyMultiple service decoder allows unauthenticated remote attackers to read one byte past an allocated buffer boundary by sending a crafted RPM request with a truncated object identifier. The vulnerability is in rpm_decode_object_id(), which checks apdu_len < 5 but then accesses all 6 byte positions (indices 0-5) — consuming 1 byte for the context tag, 4 bytes for the object ID, then reading apdu[5] for the opening tag check. A 5-byte input passes the length check but causes a 1-byte OOB read, leading to crashes on embedded BACnet devices. The vulnerability exists in src/bacnet/rpm.c and affects any deployment that enables the ReadPropertyMultiple confirmed service handler (enabled by default in the reference server). This vulnerability is fixed in 1.4.3. | ||||
| CVE-2026-41503 | 1 Bacnetstack | 1 Bacnet Stack | 2026-04-28 | 7.5 High |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to 1.4.3, an out-of-bounds read vulnerability in bacnet-stack's ReadPropertyMultiple service property decoder allows unauthenticated remote attackers to read past allocated buffer boundaries by sending an RPM request with a truncated property list. The vulnerability stems from rpm_decode_object_property() calling the deprecated decode_tag_number_and_value() function at src/bacnet/rpm.c:344, which accepts no buffer length parameter and reads blindly from whatever pointer it receives. A crafted BACnet/IP packet with a 1-byte property payload containing an extended tag marker (0xF9) causes the decoder to read 1 byte past the end of the buffer, leading to crashes on embedded BACnet devices. The vulnerability exists in src/bacnet/rpm.c and affects any deployment that enables the ReadPropertyMultiple confirmed service handler (enabled by default in the reference server). This vulnerability is fixed in 1.4.3. | ||||
| CVE-2026-24572 | 1 Wordpress | 1 Wordpress | 2026-04-28 | 8.5 High |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Nelio Software Nelio Content nelio-content allows Blind SQL Injection.This issue affects Nelio Content: from n/a through <= 4.2.0. | ||||
| CVE-2026-24538 | 2 Omnipressteam, Wordpress | 2 Omnipress, Wordpress | 2026-04-28 | 7.5 High |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in omnipressteam Omnipress omnipress allows PHP Local File Inclusion.This issue affects Omnipress: from n/a through <= 1.6.7. | ||||
| CVE-2025-70994 | 1 Yadea | 1 T5 Electric Bicycles | 2026-04-28 | 7.3 High |
| Yadea T5 Electric Bicycles (models manufactured in/after 2024) have a weak authentication mechanism in their keyless entry system. The system utilizes the EV1527 fixed-code RF protocol without implementing rolling codes or cryptographic challenge-response mechanisms. This is vulnerable to signal forgery after a local attacker intercepts any legitimate key fob transmission, allowing for complete unauthorized vehicle operation via a replay attack. | ||||
| CVE-2026-31504 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617. | ||||
| CVE-2026-31505 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 | ||||
| CVE-2026-31507 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores the pointer in pipe_buffer.private. The pipe_buf_operations for these buffers used .get = generic_pipe_buf_get, which only increments the page reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv pointer itself was not handled, so after tee() both the original and the cloned pipe_buffer share the same smc_spd_priv *. When both pipes are subsequently released, smc_rx_pipe_buf_release() is called twice against the same object: 1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct] 2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF] KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which then escalates to a NULL-pointer dereference and kernel panic via smc_rx_update_consumer() when it chases the freed priv->smc pointer: BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0 Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x650 kasan_report+0xc6/0x100 smc_rx_pipe_buf_release+0x78/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> BUG: kernel NULL pointer dereference, address: 0000000000000020 RIP: 0010:smc_rx_update_consumer+0x8d/0x350 Call Trace: <TASK> smc_rx_pipe_buf_release+0x121/0x2a0 free_pipe_info+0xd4/0x130 pipe_release+0x142/0x160 __fput+0x1c6/0x490 __x64_sys_close+0x4f/0x90 do_syscall_64+0xa6/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Kernel panic - not syncing: Fatal exception Beyond the memory-safety problem, duplicating an SMC splice buffer is semantically questionable: smc_rx_update_cons() would advance the consumer cursor twice for the same data, corrupting receive-window accounting. A refcount on smc_spd_priv could fix the double-free, but the cursor-accounting issue would still need to be addressed separately. The .get callback is invoked by both tee(2) and splice_pipe_to_pipe() for partial transfers; both will now return -EFAULT. Users who need to duplicate SMC socket data must use a copy-based read path. | ||||
| CVE-2026-7158 | 1 Dmitryglhf | 1 Mcp-url-downloader | 2026-04-28 | 7.3 High |
| A vulnerability has been found in dmitryglhf mcp-url-downloader up to 4b8cf2de55f6e8864a77d108e8a94a5b8e4394c6. Affected by this issue is the function _validate_url_safe of the file src/mcp_url_downloader/server.py. Such manipulation of the argument url leads to server-side request forgery. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-31511 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory. | ||||
| CVE-2026-30345 | 1 Ctfd | 1 Ctfd | 2026-04-28 | 7.5 High |
| A zip slip vulnerability in the Admin import functionality of CTFd v3.8.1-18-gdb5a18c4 allows attackers to write arbitrary files outside the intended directories via supplying a crafted import. | ||||
| CVE-2026-6741 | 2 Latepoint, Wordpress | 2 Latepoint – Calendar Booking Plugin For Appointments And Events, Wordpress | 2026-04-28 | 8.8 High |
| The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Privilege Escalation in versions up to and including 5.4.1. This is due to a missing authorization check in the execute() method of the connect-customer-to-wp-user ability, which only requires the customer__edit capability granted to the latepoint_agent role by default, without verifying whether the target WordPress user ID belongs to a privileged account. This makes it possible for authenticated attackers with the latepoint_agent role to link any LatePoint customer record to an administrator's WordPress account and subsequently reset the administrator's password via the normal customer password-reset flow, resulting in full site takeover. | ||||
| CVE-2026-7199 | 1 Sourcecodester | 1 Pharmacy Sales And Inventory System | 2026-04-28 | 7.3 High |
| A vulnerability was detected in SourceCodester Pharmacy Sales and Inventory System 1.0. Affected by this vulnerability is an unknown functionality of the file /ajax.php?action=delete_product. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. | ||||