Export limit exceeded: 80847 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (80847 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-3006 | 1 Winfsp | 1 Winfsp | 2026-04-27 | 7 High |
| Successful exploitation of the race condition vulnerability could allow an attacker to trigger a kernel heap overflow, potentially leading to local privilege escalation and granting system-level access to the affected software. | ||||
| CVE-2026-31641 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix RxGK token loading to check bounds rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length from the XDR token as u32 values and passes each through round_up(x, 4) before using the rounded value for validation and allocation. When the raw length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and kzalloc both use 0 while the subsequent memcpy still copies the original ~4 GiB value, producing a heap buffer overflow reachable from an unprivileged add_key() call. Fix this by: (1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX. (2) Sizing the flexible-array allocation from the validated raw key length via struct_size_t() instead of the rounded value. (3) Caching the raw lengths so that the later field assignments and memcpy calls do not re-read from the token, eliminating a class of TOCTOU re-parse. The control path (valid token with lengths within bounds) is unaffected. | ||||
| CVE-2026-31644 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix use-after-free and leak in lan966x_fdma_reload() When lan966x_fdma_reload() fails to allocate new RX buffers, the restore path restarts DMA using old descriptors whose pages were already freed via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can release pages back to the buddy allocator, the hardware may DMA into memory now owned by other kernel subsystems. Additionally, on the restore path, the newly created page pool (if allocation partially succeeded) is overwritten without being destroyed, leaking it. Fix both issues by deferring the release of old pages until after the new allocation succeeds. Save the old page array before the allocation so old pages can be freed on the success path. On the failure path, the old descriptors, pages and page pool are all still valid, making the restore safe. Also ensure the restore path re-enables NAPI and wakes the netdev, matching the success path. | ||||
| CVE-2026-31662 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on every inbound group ACK, even when the same member has already acknowledged the current broadcast round. Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to 65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents the underflow path. | ||||
| CVE-2026-31656 | 1 Linux | 2 Kernel, Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat A use-after-free / refcount underflow is possible when the heartbeat worker and intel_engine_park_heartbeat() race to release the same engine->heartbeat.systole request. The heartbeat worker reads engine->heartbeat.systole and calls i915_request_put() on it when the request is complete, but clears the pointer in a separate, non-atomic step. Concurrently, a request retirement on another CPU can drop the engine wakeref to zero, triggering __engine_park() -> intel_engine_park_heartbeat(). If the heartbeat timer is pending at that point, cancel_delayed_work() returns true and intel_engine_park_heartbeat() reads the stale non-NULL systole pointer and calls i915_request_put() on it again, causing a refcount underflow: ``` <4> [487.221889] Workqueue: i915-unordered engine_retire [i915] <4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0 ... <4> [487.222707] Call Trace: <4> [487.222711] <TASK> <4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915] <4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915] <4> [487.223566] __engine_park+0xb9/0x650 [i915] <4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915] <4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915] <4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915] <4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915] <4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915] <4> [487.226178] i915_request_retire+0x1c/0x40 [i915] <4> [487.226625] engine_retire+0x122/0x180 [i915] <4> [487.227037] process_one_work+0x239/0x760 <4> [487.227060] worker_thread+0x200/0x3f0 <4> [487.227068] ? __pfx_worker_thread+0x10/0x10 <4> [487.227075] kthread+0x10d/0x150 <4> [487.227083] ? __pfx_kthread+0x10/0x10 <4> [487.227092] ret_from_fork+0x3d4/0x480 <4> [487.227099] ? __pfx_kthread+0x10/0x10 <4> [487.227107] ret_from_fork_asm+0x1a/0x30 <4> [487.227141] </TASK> ``` Fix this by replacing the non-atomic pointer read + separate clear with xchg() in both racing paths. xchg() is a single indivisible hardware instruction that atomically reads the old pointer and writes NULL. This guarantees only one of the two concurrent callers obtains the non-NULL pointer and performs the put, the other gets NULL and skips it. (cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) | ||||
| CVE-2026-31652 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/stat: deallocate damon_call() failure leaking damon_ctx damon_stat_start() always allocates the module's damon_ctx object (damon_stat_context). Meanwhile, if damon_call() in the function fails, the damon_ctx object is not deallocated. Hence, if the damon_call() is failed, and the user writes Y to “enabled” again, the previously allocated damon_ctx object is leaked. This cannot simply be fixed by deallocating the damon_ctx object when damon_call() fails. That's because damon_call() failure doesn't guarantee the kdamond main function, which accesses the damon_ctx object, is completely finished. In other words, if damon_stat_start() deallocates the damon_ctx object after damon_call() failure, the not-yet-terminated kdamond could access the freed memory (use-after-free). Fix the leak while avoiding the use-after-free by keeping returning damon_stat_start() without deallocating the damon_ctx object after damon_call() failure, but deallocating it when the function is invoked again and the kdamond is completely terminated. If the kdamond is not yet terminated, simply return -EAGAIN, as the kdamond will soon be terminated. The issue was discovered [1] by sashiko. | ||||
| CVE-2026-31548 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down When the nl80211 socket that originated a PMSR request is closed, cfg80211_release_pmsr() sets the request's nl_portid to zero and schedules pmsr_free_wk to process the abort asynchronously. If the interface is concurrently torn down before that work runs, cfg80211_pmsr_wdev_down() calls cfg80211_pmsr_process_abort() directly. However, the already- scheduled pmsr_free_wk work item remains pending and may run after the interface has been removed from the driver. This could cause the driver's abort_pmsr callback to operate on a torn-down interface, leading to undefined behavior and potential crashes. Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down() before calling cfg80211_pmsr_process_abort(). This ensures any pending or in-progress work is drained before interface teardown proceeds, preventing the work from invoking the driver abort callback after the interface is gone. | ||||
| CVE-2026-31552 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push"), wl1271_tx_allocate() and with it wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails. However, in wlcore_tx_work_locked(), a return value of -EAGAIN from wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being full. This causes the code to flush the buffer, put the skb back at the head of the queue, and immediately retry the same skb in a tight while loop. Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens immediately with GFP_ATOMIC, this will result in an infinite loop and a CPU soft lockup. Return -ENOMEM instead so the packet is dropped and the loop terminates. The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y. | ||||
| CVE-2026-41421 | 1 Siyuan | 1 Siyuan | 2026-04-27 | 8.8 High |
| SiYuan is an open-source personal knowledge management system. Prior to 3.6.5, SiYuan desktop renders notification messages as raw HTML inside an Electron renderer. The notification route POST /api/notification/pushMsg accepts a user-controlled msg value, forwards it through the backend broadcast layer, and the frontend inserts it into the DOM with insertAdjacentHTML(...) at message.ts. On desktop builds, this is not limited to ordinary XSS. Electron windows are created with nodeIntegration: true, contextIsolation: false, and webSecurity: false at main.js. As a result, JavaScript executed from the notification sink can directly access Node APIs and escalate to desktop code execution. This vulnerability is fixed in 3.6.5. | ||||
| CVE-2026-31553 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc() Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2 descriptors looks really wrong, if offset is not zero. What we want to get for swapping is hva + offset, not hva + offset*8. ;-) Fix it. | ||||
| CVE-2026-31554 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM found it was possible to create a UaF when sys_futex_requeue() is used with different flags. The initial motivation for allowing different flags was the variable sized futex, but since that hasn't been merged (yet), simply mandate the flags are identical, as is the case for the old style sys_futex() requeue operations. | ||||
| CVE-2026-31650 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on disconnect The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller. | ||||
| CVE-2026-31557 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq. | ||||
| CVE-2026-31558 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this case so as to make it more robust. This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. | ||||
| CVE-2026-7062 | 1 Intina47 | 1 Context-sync | 2026-04-27 | 7.3 High |
| A security vulnerability has been detected in Intina47 context-sync up to 2.0.0. This affects an unknown part of the file src/git-integration.ts of the component Git Integration. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-31648 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: filemap: fix nr_pages calculation overflow in filemap_map_pages() When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I encountered some very strange crash issues showing up as "Bad page state": " [ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb [ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb [ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff) [ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000 [ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000 [ 734.496442] page dumped because: nonzero mapcount " After analyzing this page’s state, it is hard to understand why the mapcount is not 0 while the refcount is 0, since this page is not where the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can reproduce the crash as well and captured the first warning where the issue appears: " [ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0 [ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 734.469315] memcg:ffff000807a8ec00 [ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540" [ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff) ...... [ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio) [ 734.469390] ------------[ cut here ]------------ [ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468, CPU#90: stress-ng-mlock/9430 [ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P) [ 734.469555] set_pte_range+0xd8/0x2f8 [ 734.469566] filemap_map_folio_range+0x190/0x400 [ 734.469579] filemap_map_pages+0x348/0x638 [ 734.469583] do_fault_around+0x140/0x198 ...... [ 734.469640] el0t_64_sync+0x184/0x188 " The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page + nr_pages - 1) != folio, folio)", which indicates that set_pte_range() tried to map beyond the large folio’s size. By adding more debug information, I found that 'nr_pages' had overflowed in filemap_map_pages(), causing set_pte_range() to establish mappings for a range exceeding the folio size, potentially corrupting fields of pages that do not belong to this folio (e.g., page->_mapcount). After above analysis, I think the possible race is as follows: CPU 0 CPU 1 filemap_map_pages() ext4_setattr() //get and lock folio with old inode->i_size next_uptodate_folio() ....... //shrink the inode->i_size i_size_write(inode, attr->ia_size); //calculate the end_pgoff with the new inode->i_size file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1; end_pgoff = min(end_pgoff, file_end); ...... //nr_pages can be overflowed, cause xas.xa_index > end_pgoff end = folio_next_index(folio) - 1; nr_pages = min(end, end_pgoff) - xas.xa_index + 1; ...... //map large folio filemap_map_folio_range() ...... //truncate folios truncate_pagecache(inode, inode->i_size); To fix this issue, move the 'end_pgoff' calculation before next_uptodate_folio(), so the retrieved folio stays consistent with the file end to avoid ---truncated--- | ||||
| CVE-2018-25283 | 1 Securimport | 1 Ismartviewpro | 2026-04-27 | 8.4 High |
| iSmartViewPro 1.5 contains a structured exception handling (SEH) buffer overflow vulnerability in the 'Save Path for Snapshot and Record file' field that allows local attackers to execute arbitrary code. Attackers can input a crafted payload exceeding 260 bytes through the System Setup interface to overwrite SEH records and execute shellcode with application privileges. | ||||
| CVE-2018-25263 | 1 Faleemi | 1 Faleemi Desktop Software | 2026-04-27 | 8.4 High |
| Faleemi Desktop Software 1.8.2 contains a local buffer overflow vulnerability in the Device alias field that allows local attackers to trigger a structured exception handler (SEH) overwrite. Attackers can craft a malicious payload and paste it into the Device alias field within the Managing Log interface to execute arbitrary code with calculator proof-of-concept execution. | ||||
| CVE-2026-7039 | 1 Tufantunc | 1 Ssh-mcp | 2026-04-27 | 7.8 High |
| A security vulnerability has been detected in tufantunc ssh-mcp up to 1.5.0. The affected element is the function shell.write of the file src/index.ts. Such manipulation of the argument Description leads to command injection. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2025-7424 | 2 Redhat, Xmlsoft | 5 Enterprise Linux, Hummingbird, Openshift and 2 more | 2026-04-27 | 7.5 High |
| A flaw was found in the libxslt library. The same memory field, psvi, is used for both stylesheet and input data, which can lead to type confusion during XML transformations. This vulnerability allows an attacker to crash the application or corrupt memory. In some cases, it may lead to denial of service or unexpected behavior. | ||||