Export limit exceeded: 18659 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18659 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54007 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vmci_host: fix a race condition in vmci_host_poll() causing GPF During fuzzing, a general protection fault is observed in vmci_host_poll(). general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926 <- omitting registers -> Call Trace: <TASK> lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162 add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22 poll_wait include/linux/poll.h:49 [inline] vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174 vfs_poll include/linux/poll.h:88 [inline] do_pollfd fs/select.c:873 [inline] do_poll fs/select.c:921 [inline] do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015 __do_sys_ppoll fs/select.c:1121 [inline] __se_sys_ppoll+0x2cc/0x330 fs/select.c:1101 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Example thread interleaving that causes the general protection fault is as follows: CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context) ----- ----- // Read uninitialized context context = vmci_host_dev->context; // Initialize context vmci_host_dev->context = vmci_ctx_create(); vmci_host_dev->ct_type = VMCIOBJ_CONTEXT; if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { // Dereferencing the wrong pointer poll_wait(..., &context->host_context); } In this scenario, vmci_host_poll() reads vmci_host_dev->context first, and then reads vmci_host_dev->ct_type to check that vmci_host_dev->context is initialized. However, since these two reads are not atomically executed, there is a chance of a race condition as described above. To fix this race condition, read vmci_host_dev->context after checking the value of vmci_host_dev->ct_type so that vmci_host_poll() always reads an initialized context. | ||||
| CVE-2023-54006 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data-race around unix_tot_inflight. unix_tot_inflight is changed under spin_lock(unix_gc_lock), but unix_release_sock() reads it locklessly. Let's use READ_ONCE() for unix_tot_inflight. Note that the writer side was marked by commit 9d6d7f1cb67c ("af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress") BUG: KCSAN: data-race in unix_inflight / unix_release_sock write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1: unix_inflight+0x130/0x180 net/unix/scm.c:64 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1832 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547 __sys_sendmsg+0x94/0x140 net/socket.c:2576 __do_sys_sendmsg net/socket.c:2585 [inline] __se_sys_sendmsg net/socket.c:2583 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0: unix_release_sock+0x608/0x910 net/unix/af_unix.c:671 unix_release+0x59/0x80 net/unix/af_unix.c:1058 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1385 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 | ||||
| CVE-2023-54049 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: glink: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. | ||||
| CVE-2023-53988 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix slab-out-of-bounds read in hdr_delete_de() Here is a BUG report from syzbot: BUG: KASAN: slab-out-of-bounds in hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806 Read of size 16842960 at addr ffff888079cc0600 by task syz-executor934/3631 Call Trace: memmove+0x25/0x60 mm/kasan/shadow.c:54 hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806 indx_delete_entry+0x74f/0x3670 fs/ntfs3/index.c:2193 ni_remove_name+0x27a/0x980 fs/ntfs3/frecord.c:2910 ntfs_unlink_inode+0x3d4/0x720 fs/ntfs3/inode.c:1712 ntfs_rename+0x41a/0xcb0 fs/ntfs3/namei.c:276 Before using the meta-data in struct INDEX_HDR, we need to check index header valid or not. Otherwise, the corruptedi (or malicious) fs image can cause out-of-bounds access which could make kernel panic. | ||||
| CVE-2023-53987 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ping: Fix potentail NULL deref for /proc/net/icmp. After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. | ||||
| CVE-2023-53986 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mips: bmips: BCM6358: disable RAC flush for TP1 RAC flush causes kernel panics on BCM6358 with EHCI/OHCI when booting from TP1: [ 3.881739] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 3.895011] Reserved instruction in kernel code[#1]: [ 3.900113] CPU: 0 PID: 1 Comm: init Not tainted 5.10.16 #0 [ 3.905829] $ 0 : 00000000 10008700 00000000 77d94060 [ 3.911238] $ 4 : 7fd1f088 00000000 81431cac 81431ca0 [ 3.916641] $ 8 : 00000000 ffffefff 8075cd34 00000000 [ 3.922043] $12 : 806f8d40 f3e812b7 00000000 000d9aaa [ 3.927446] $16 : 7fd1f068 7fd1f080 7ff559b8 81428470 [ 3.932848] $20 : 00000000 00000000 55590000 77d70000 [ 3.938251] $24 : 00000018 00000010 [ 3.943655] $28 : 81430000 81431e60 81431f28 800157fc [ 3.949058] Hi : 00000000 [ 3.952013] Lo : 00000000 [ 3.955019] epc : 80015808 setup_sigcontext+0x54/0x24c [ 3.960464] ra : 800157fc setup_sigcontext+0x48/0x24c [ 3.965913] Status: 10008703 KERNEL EXL IE [ 3.970216] Cause : 00800028 (ExcCode 0a) [ 3.974340] PrId : 0002a010 (Broadcom BMIPS4350) [ 3.979170] Modules linked in: ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common [ 3.992907] Process init (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=77e22ec8) [ 4.000776] Stack : 81431ef4 7fd1f080 81431f28 81428470 7fd1f068 81431edc 7ff559b8 81428470 [ 4.009467] 81431f28 7fd1f080 55590000 77d70000 77d5498c 80015c70 806f0000 8063ae74 [ 4.018149] 08100002 81431f28 0000000a 08100002 81431f28 0000000a 77d6b418 00000003 [ 4.026831] ffffffff 80016414 80080734 81431ecc 81431ecc 00000001 00000000 04000000 [ 4.035512] 77d54874 00000000 00000000 00000000 00000000 00000012 00000002 00000000 [ 4.044196] ... [ 4.046706] Call Trace: [ 4.049238] [<80015808>] setup_sigcontext+0x54/0x24c [ 4.054356] [<80015c70>] setup_frame+0xdc/0x124 [ 4.059015] [<80016414>] do_notify_resume+0x1dc/0x288 [ 4.064207] [<80011b50>] work_notifysig+0x10/0x18 [ 4.069036] [ 4.070538] Code: 8fc300b4 00001025 26240008 <ac820000> ac830004 3c048063 0c0228aa 24846a00 26240010 [ 4.080686] [ 4.082517] ---[ end trace 22a8edb41f5f983b ]--- [ 4.087374] Kernel panic - not syncing: Fatal exception [ 4.092753] Rebooting in 1 seconds.. Because the bootloader (CFE) is not initializing the Read-ahead cache properly on the second thread (TP1). Since the RAC was not initialized properly, we should avoid flushing it at the risk of corrupting the instruction stream as seen in the trace above. | ||||
| CVE-2025-22836 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Integer overflow or wraparound in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2023-54277 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: Fix endpoint check The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. | ||||
| CVE-2023-53844 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Don't leak a resource on swapout move error If moving the bo to system for swapout failed, we were leaking a resource. Fix. | ||||
| CVE-2023-53843 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject negative ifindex Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs in an xarray")) refactored the handling of pre-assigned ifindexes and let syzbot surface a latent problem in ovs. ovs does not validate ifindex, making it possible to create netdev ports with negative ifindex values. It's easy to repro with YNL: $ ./cli.py --spec netlink/specs/ovs_datapath.yaml \ --do new \ --json '{"upcall-pid": 1, "name":"my-dp"}' $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' $ ip link show -65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff ... Validate the inputs. Now the second command correctly returns: $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' lib.ynl.NlError: Netlink error: Numerical result out of range nl_len = 108 (92) nl_flags = 0x300 nl_type = 2 error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'} Accept 0 since it used to be silently ignored. | ||||
| CVE-2023-53842 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd-mbhc-v2: fix resource leaks on component remove The MBHC resources must be released on component probe failure and removal so can not be tied to the lifetime of the component device. This is specifically needed to allow probe deferrals of the sound card which otherwise fails when reprobing the codec component: snd-sc8280xp sound: ASoC: failed to instantiate card -517 genirq: Flags mismatch irq 299. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr) wcd938x_codec audio-codec: Failed to request mbhc interrupts -16 wcd938x_codec audio-codec: mbhc initialization failed wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on audio-codec: -16 snd-sc8280xp sound: ASoC: failed to instantiate card -16 | ||||
| CVE-2023-53841 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: devlink: report devlink_port_type_warn source device devlink_port_type_warn is scheduled for port devlink and warning when the port type is not set. But from this warning it is not easy found out which device (driver) has no devlink port set. [ 3709.975552] Type was not set for devlink port. [ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20 [ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm [ 3709.994030] crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse [ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1 [ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022 [ 3710.108437] Workqueue: events devlink_port_type_warn [ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20 [ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87 [ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282 [ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027 [ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8 [ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18 [ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600 [ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905 [ 3710.108452] FS: 0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000 [ 3710.108453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0 [ 3710.108456] PKRU: 55555554 [ 3710.108457] Call Trace: [ 3710.108458] <TASK> [ 3710.108459] process_one_work+0x1e2/0x3b0 [ 3710.108466] ? rescuer_thread+0x390/0x390 [ 3710.108468] worker_thread+0x50/0x3a0 [ 3710.108471] ? rescuer_thread+0x390/0x390 [ 3710.108473] kthread+0xdd/0x100 [ 3710.108477] ? kthread_complete_and_exit+0x20/0x20 [ 3710.108479] ret_from_fork+0x1f/0x30 [ 3710.108485] </TASK> [ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]--- After patch: [ 402.473064] ice 0000:41:00.0: Type was not set for devlink port. [ 402.473064] ice 0000:41:00.1: Type was not set for devlink port. | ||||
| CVE-2023-53840 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: early: xhci-dbc: Fix a potential out-of-bound memory access If xdbc_bulk_write() fails, the values in 'buf' can be anything. So the string is not guaranteed to be NULL terminated when xdbc_trace() is called. Reserve an extra byte, which will be zeroed automatically because 'buf' is a static variable, in order to avoid troubles, should it happen. | ||||
| CVE-2023-54289 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix NULL dereference in error handling Smatch reported: drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues() warn: missing unwind goto? At this point in the function, nothing has been allocated so we can return directly. In particular the "qedf->global_queues" have not been allocated so calling qedf_free_global_queues() will lead to a NULL dereference when we check if (!gl[i]) and "gl" is NULL. | ||||
| CVE-2023-53839 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dccp: fix data-race around dp->dccps_mss_cache dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket. Same thing in do_dccp_getsockopt(). Add READ_ONCE()/WRITE_ONCE() annotations, and change dccp_sendmsg() to check again dccps_mss_cache after socket is locked. | ||||
| CVE-2023-53810 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: release crypto keyslot before reporting I/O complete Once all I/O using a blk_crypto_key has completed, filesystems can call blk_crypto_evict_key(). However, the block layer currently doesn't call blk_crypto_put_keyslot() until the request is being freed, which happens after upper layers have been told (via bio_endio()) the I/O has completed. This causes a race condition where blk_crypto_evict_key() can see 'slot_refs != 0' without there being an actual bug. This makes __blk_crypto_evict_key() hit the 'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without doing anything, eventually causing a use-after-free in blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only been seen when per-file keys are being used with fscrypt.) There are two options to fix this: either release the keyslot before bio_endio() is called on the request's last bio, or make __blk_crypto_evict_key() ignore slot_refs. Let's go with the first solution, since it preserves the ability to report bugs (via WARN_ON_ONCE) where a key is evicted while still in-use. | ||||
| CVE-2023-53809 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() When a file descriptor of pppol2tp socket is passed as file descriptor of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register(). This situation is reproduced by the following program: int main(void) { int sock; struct sockaddr_pppol2tp addr; sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP); if (sock < 0) { perror("socket"); return 1; } addr.sa_family = AF_PPPOX; addr.sa_protocol = PX_PROTO_OL2TP; addr.pppol2tp.pid = 0; addr.pppol2tp.fd = sock; addr.pppol2tp.addr.sin_family = PF_INET; addr.pppol2tp.addr.sin_port = htons(0); addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1"); addr.pppol2tp.s_tunnel = 1; addr.pppol2tp.s_session = 0; addr.pppol2tp.d_tunnel = 0; addr.pppol2tp.d_session = 0; if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) { perror("connect"); return 1; } return 0; } This program causes the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.2.0-rc5-00205-gc96618275234 #56 Not tainted -------------------------------------------- repro/8607 is trying to acquire lock: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0 but task is already holding lock: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sk_lock-AF_PPPOX); lock(sk_lock-AF_PPPOX); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by repro/8607: #0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30 stack backtrace: CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x178 __lock_acquire.cold+0x119/0x3b9 ? lockdep_hardirqs_on_prepare+0x410/0x410 lock_acquire+0x1e0/0x610 ? l2tp_tunnel_register+0x2b7/0x11c0 ? lock_downgrade+0x710/0x710 ? __fget_files+0x283/0x3e0 lock_sock_nested+0x3a/0xf0 ? l2tp_tunnel_register+0x2b7/0x11c0 l2tp_tunnel_register+0x2b7/0x11c0 ? sprintf+0xc4/0x100 ? l2tp_tunnel_del_work+0x6b0/0x6b0 ? debug_object_deactivate+0x320/0x320 ? lockdep_init_map_type+0x16d/0x7a0 ? lockdep_init_map_type+0x16d/0x7a0 ? l2tp_tunnel_create+0x2bf/0x4b0 ? l2tp_tunnel_create+0x3c6/0x4b0 pppol2tp_connect+0x14e1/0x1a30 ? pppol2tp_put_sk+0xd0/0xd0 ? aa_sk_perm+0x2b7/0xa80 ? aa_af_perm+0x260/0x260 ? bpf_lsm_socket_connect+0x9/0x10 ? pppol2tp_put_sk+0xd0/0xd0 __sys_connect_file+0x14f/0x190 __sys_connect+0x133/0x160 ? __sys_connect_file+0x190/0x190 ? lockdep_hardirqs_on+0x7d/0x100 ? ktime_get_coarse_real_ts64+0x1b7/0x200 ? ktime_get_coarse_real_ts64+0x147/0x200 ? __audit_syscall_entry+0x396/0x500 __x64_sys_connect+0x72/0xb0 do_syscall_64+0x38/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes the issue by getting/creating the tunnel before locking the pppol2tp socket. | ||||
| CVE-2023-53808 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix memory leak in mwifiex_histogram_read() Always free the zeroed page on return from 'mwifiex_histogram_read()'. | ||||
| CVE-2023-53807 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider() Smatch detected this potential error pointer dereference clk_wzrd_register_divider(). If devm_clk_hw_register() fails then it sets "hw" to an error pointer and then dereferences it on the next line. Return the error directly instead. | ||||
| CVE-2023-53806 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: populate subvp cmd info only for the top pipe [Why] System restart observed while changing the display resolution to 8k with extended mode. Sytem restart was caused by a page fault. [How] When the driver populates subvp info it did it for both the pipes using vblank which caused an outof bounds array access causing the page fault. added checks to allow the top pipe only to fix this issue. | ||||