Export limit exceeded: 351254 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 35281 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (35281 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49520 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-12-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall If a compat process tries to execute an unknown system call above the __ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the offending process. Information about the error is printed to dmesg in compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() -> arm64_show_signal(). arm64_show_signal() interprets a non-zero value for current->thread.fault_code as an exception syndrome and displays the message associated with the ESR_ELx.EC field (bits 31:26). current->thread.fault_code is set in compat_arm_syscall() -> arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx value. This means that the ESR_ELx.EC field has the value that the user set for the syscall number and the kernel can end up printing bogus exception messages*. For example, for the syscall number 0x68000000, which evaluates to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error: [ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000] [ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79 [ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which is misleading, as the bad compat syscall has nothing to do with pointer authentication. Stop arm64_show_signal() from printing exception syndrome information by having compat_arm_syscall() set the ESR_ELx value to 0, as it has no meaning for an invalid system call number. The example above now becomes: [ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000] [ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80 [ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which although shows less information because the syscall number, wrongfully advertised as the ESR value, is missing, it is better than showing plainly wrong information. The syscall number can be easily obtained with strace. *A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END evaluates to true; the syscall will exit to userspace in this case with the ENOSYS error code instead of arm64_notify_die() being called. | ||||
| CVE-2019-6223 | 1 Apple | 2 Iphone Os, Mac Os X | 2025-12-20 | 7.5 High |
| A logic issue existed in the handling of Group FaceTime calls. The issue was addressed with improved state management. This issue is fixed in iOS 12.1.4, macOS Mojave 10.14.3 Supplemental Update. The initiator of a Group FaceTime call may be able to cause the recipient to answer. | ||||
| CVE-2022-32387 | 1 Kentico | 1 Xperience | 2025-12-19 | 7.5 High |
| In Kentico before 13.0.66, attackers can achieve Denial of Service via a crafted request to the GetResource handler. | ||||
| CVE-2025-38310 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: seg6: Fix validation of nexthop addresses The kernel currently validates that the length of the provided nexthop address does not exceed the specified length. This can lead to the kernel reading uninitialized memory if user space provided a shorter length than the specified one. Fix by validating that the provided length exactly matches the specified one. | ||||
| CVE-2025-38305 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use() There is no disagreement that we should check both ptp->is_virtual_clock and ptp->n_vclocks to check if the ptp virtual clock is in use. However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in ptp_vclock_in_use(), we observe a recursive lock in the call trace starting from n_vclocks_store(). ============================================ WARNING: possible recursive locking detected 6.15.0-rc6 #1 Not tainted -------------------------------------------- syz.0.1540/13807 is trying to acquire lock: ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline] ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415 but task is already holding lock: ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ptp->n_vclocks_mux); lock(&ptp->n_vclocks_mux); *** DEADLOCK *** .... ============================================ The best way to solve this is to remove the logic that checks ptp->n_vclocks in ptp_vclock_in_use(). The reason why this is appropriate is that any path that uses ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater than 0 before unregistering vclocks, and all functions are already written this way. And in the function that uses ptp->n_vclocks, we already get ptp->n_vclocks_mux before unregistering vclocks. Therefore, we need to remove the redundant check for ptp->n_vclocks in ptp_vclock_in_use() to prevent recursive locking. | ||||
| CVE-2025-37936 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest. Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events. The issue is most easily reproduced by running `perf kvm top` from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after which, `perf kvm top` effectively stopped using PEBS). The userspace side of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event. Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events. Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM. | ||||
| CVE-2025-38331 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Use TOE/TSO on all TCP It is desireable to push the hardware accelerator to also process non-segmented TCP frames: we pass the skb->len to the "TOE/TSO" offloader and it will handle them. Without this quirk the driver becomes unstable and lock up and and crash. I do not know exactly why, but it is probably due to the TOE (TCP offload engine) feature that is coupled with the segmentation feature - it is not possible to turn one part off and not the other, either both TOE and TSO are active, or neither of them. Not having the TOE part active seems detrimental, as if that hardware feature is not really supposed to be turned off. The datasheet says: "Based on packet parsing and TCP connection/NAT table lookup results, the NetEngine puts the packets belonging to the same TCP connection to the same queue for the software to process. The NetEngine puts incoming packets to the buffer or series of buffers for a jumbo packet. With this hardware acceleration, IP/TCP header parsing, checksum validation and connection lookup are offloaded from the software processing." After numerous tests with the hardware locking up after something between minutes and hours depending on load using iperf3 I have concluded this is necessary to stabilize the hardware. | ||||
| CVE-2025-38326 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: aoe: clean device rq_list in aoedev_downdev() An aoe device's rq_list contains accepted block requests that are waiting to be transmitted to the aoe target. This queue was added as part of the conversion to blk_mq. However, the queue was not cleaned out when an aoe device is downed which caused blk_mq_freeze_queue() to sleep indefinitely waiting for those requests to complete, causing a hang. This fix cleans out the queue before calling blk_mq_freeze_queue(). | ||||
| CVE-2025-38324 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu(). As syzbot reported [0], mpls_route_input_rcu() can be called from mpls_getroute(), where is under RTNL. net->mpls.platform_label is only updated under RTNL. Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to silence the splat. [0]: WARNING: suspicious RCU usage 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted ---------------------------- net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.2.4451/17730: #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline] #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961 stack backtrace: CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865 mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84 mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381 rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964 netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmmsg+0x200/0x420 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0a2818e969 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969 RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003 RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268 </TASK> | ||||
| CVE-2025-38037 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Annotate FDB data races The 'used' and 'updated' fields in the FDB entry structure can be accessed concurrently by multiple threads, leading to reports such as [1]. Can be reproduced using [2]. Suppress these reports by annotating these accesses using READ_ONCE() / WRITE_ONCE(). [1] BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0: vxlan_xmit+0xb29/0x2380 dev_hard_start_xmit+0x84/0x2f0 __dev_queue_xmit+0x45a/0x1650 packet_xmit+0x100/0x150 packet_sendmsg+0x2114/0x2ac0 __sys_sendto+0x318/0x330 __x64_sys_sendto+0x76/0x90 x64_sys_call+0x14e8/0x1c00 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2: vxlan_xmit+0xadf/0x2380 dev_hard_start_xmit+0x84/0x2f0 __dev_queue_xmit+0x45a/0x1650 packet_xmit+0x100/0x150 packet_sendmsg+0x2114/0x2ac0 __sys_sendto+0x318/0x330 __x64_sys_sendto+0x76/0x90 x64_sys_call+0x14e8/0x1c00 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f Reported by Kernel Concurrency Sanitizer on: CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [2] #!/bin/bash set +H echo whitelist > /sys/kernel/debug/kcsan echo !vxlan_xmit > /sys/kernel/debug/kcsan ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1 bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1 taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q & taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q & | ||||
| CVE-2025-38062 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie The IOMMU translation for MSI message addresses has been a 2-step process, separated in time: 1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address is stored in the MSI descriptor when an MSI interrupt is allocated. 2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a translated message address. This has an inherent lifetime problem for the pointer stored in the cookie that must remain valid between the two steps. However, there is no locking at the irq layer that helps protect the lifetime. Today, this works under the assumption that the iommu domain is not changed while MSI interrupts being programmed. This is true for normal DMA API users within the kernel, as the iommu domain is attached before the driver is probed and cannot be changed while a driver is attached. Classic VFIO type1 also prevented changing the iommu domain while VFIO was running as it does not support changing the "container" after starting up. However, iommufd has improved this so that the iommu domain can be changed during VFIO operation. This potentially allows userspace to directly race VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()). This potentially causes both the cookie pointer and the unlocked call to iommu_get_domain_for_dev() on the MSI translation path to become UAFs. Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA address is already known during iommu_dma_prepare_msi() and cannot change. Thus, it can simply be stored as an integer in the MSI descriptor. The other UAF related to iommu_get_domain_for_dev() will be addressed in patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by using the IOMMU group mutex. | ||||
| CVE-2025-38194 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jffs2: check that raw node were preallocated before writing summary Syzkaller detected a kernel bug in jffs2_link_node_ref, caused by fault injection in jffs2_prealloc_raw_node_refs. jffs2_sum_write_sumnode doesn't check return value of jffs2_prealloc_raw_node_refs and simply lets any error propagate into jffs2_sum_write_data, which eventually calls jffs2_link_node_ref in order to link the summary to an expectedly allocated node. kernel BUG at fs/jffs2/nodelist.c:592! invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 31277 Comm: syz-executor.7 Not tainted 6.1.128-syzkaller-00139-ge10f83ca10a1 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jffs2_link_node_ref+0x570/0x690 fs/jffs2/nodelist.c:592 Call Trace: <TASK> jffs2_sum_write_data fs/jffs2/summary.c:841 [inline] jffs2_sum_write_sumnode+0xd1a/0x1da0 fs/jffs2/summary.c:874 jffs2_do_reserve_space+0xa18/0xd60 fs/jffs2/nodemgmt.c:388 jffs2_reserve_space+0x55f/0xaa0 fs/jffs2/nodemgmt.c:197 jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362 jffs2_write_end+0x726/0x15d0 fs/jffs2/file.c:301 generic_perform_write+0x314/0x5d0 mm/filemap.c:3856 __generic_file_write_iter+0x2ae/0x4d0 mm/filemap.c:3973 generic_file_write_iter+0xe3/0x350 mm/filemap.c:4005 call_write_iter include/linux/fs.h:2265 [inline] do_iter_readv_writev+0x20f/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10c/0x170 fs/splice.c:950 splice_direct_to_actor+0x337/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fix this issue by checking return value of jffs2_prealloc_raw_node_refs before calling jffs2_sum_write_data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2025-38202 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() bpf_map_lookup_percpu_elem() helper is also available for sleepable bpf program. When BPF JIT is disabled or under 32-bit host, bpf_map_lookup_percpu_elem() will not be inlined. Using it in a sleepable bpf program will trigger the warning in bpf_map_lookup_percpu_elem(), because the bpf program only holds rcu_read_lock_trace lock. Therefore, add the missed check. | ||||
| CVE-2025-38084 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: unshare page tables during VMA split, not before Currently, __split_vma() triggers hugetlb page table unsharing through vm_ops->may_split(). This happens before the VMA lock and rmap locks are taken - which is too early, it allows racing VMA-locked page faults in our process and racing rmap walks from other processes to cause page tables to be shared again before we actually perform the split. Fix it by explicitly calling into the hugetlb unshare logic from __split_vma() in the same place where THP splitting also happens. At that point, both the VMA and the rmap(s) are write-locked. An annoying detail is that we can now call into the helper hugetlb_unshare_pmds() from two different locking contexts: 1. from hugetlb_split(), holding: - mmap lock (exclusively) - VMA lock - file rmap lock (exclusively) 2. hugetlb_unshare_all_pmds(), which I think is designed to be able to call us with only the mmap lock held (in shared mode), but currently only runs while holding mmap lock (exclusively) and VMA lock Backporting note: This commit fixes a racy protection that was introduced in commit b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that commit claimed to fix an issue introduced in 5.13, but it should actually also go all the way back. [jannh@google.com: v2] | ||||
| CVE-2025-38151 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work The cited commit fixed a crash when cma_netevent_callback was called for a cma_id while work on that id from a previous call had not yet started. The work item was re-initialized in the second call, which corrupted the work item currently in the work queue. However, it left a problem when queue_work fails (because the item is still pending in the work queue from a previous call). In this case, cma_id_put (which is called in the work handler) is therefore not called. This results in a userspace process hang (zombie process). Fix this by calling cma_id_put() if queue_work fails. | ||||
| CVE-2025-7044 | 1 Canonical | 1 Maas | 2025-12-18 | 7.7 High |
| An Improper Input Validation vulnerability exists in the user websocket handler of MAAS. An authenticated, unprivileged attacker can intercept a user.update websocket request and inject the is_superuser property set to true. The server improperly validates this input, allowing the attacker to self-promote to an administrator role. This results in full administrative control over the MAAS deployment. | ||||
| CVE-2025-38173 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: marvell/cesa - Handle zero-length skcipher requests Do not access random memory for zero-length skcipher requests. Just return 0. | ||||
| CVE-2025-38170 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: Discard stale CPU state when handling SME traps The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state incorrectly, and a race with preemption can result in a task having TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SME traps enabled). This can result in warnings from do_sme_acc() where SME traps are not expected while TIF_SME is set: | /* With TIF_SME userspace shouldn't generate any traps */ | if (test_and_set_thread_flag(TIF_SME)) | WARN_ON(1); This is very similar to the SVE issue we fixed in commit: 751ecf6afd6568ad ("arm64/sve: Discard stale CPU state when handling SVE traps") The race can occur when the SME trap handler is preempted before and after manipulating the saved FPSIMD/SVE/SME state, starting and ending on the same CPU, e.g. | void do_sme_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SME clear, SME traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | /* With TIF_SME userspace shouldn't generate any traps */ | if (test_and_set_thread_flag(TIF_SME)) | WARN_ON(1); | | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | unsigned long vq_minus_one = | sve_vq_from_vl(task_get_sme_vl(current)) - 1; | sme_set_vq(vq_minus_one); | | fpsimd_bind_task_to_cpu(); | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SME traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. Note: this was originallly posted as [1]. [ Rutland: rewrite commit message ] | ||||
| CVE-2025-38166 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix ktls panic with sockmap [ 2172.936997] ------------[ cut here ]------------ [ 2172.936999] kernel BUG at lib/iov_iter.c:629! ...... [ 2172.944996] PKRU: 55555554 [ 2172.945155] Call Trace: [ 2172.945299] <TASK> [ 2172.945428] ? die+0x36/0x90 [ 2172.945601] ? do_trap+0xdd/0x100 [ 2172.945795] ? iov_iter_revert+0x178/0x180 [ 2172.946031] ? iov_iter_revert+0x178/0x180 [ 2172.946267] ? do_error_trap+0x7d/0x110 [ 2172.946499] ? iov_iter_revert+0x178/0x180 [ 2172.946736] ? exc_invalid_op+0x50/0x70 [ 2172.946961] ? iov_iter_revert+0x178/0x180 [ 2172.947197] ? asm_exc_invalid_op+0x1a/0x20 [ 2172.947446] ? iov_iter_revert+0x178/0x180 [ 2172.947683] ? iov_iter_revert+0x5c/0x180 [ 2172.947913] tls_sw_sendmsg_locked.isra.0+0x794/0x840 [ 2172.948206] tls_sw_sendmsg+0x52/0x80 [ 2172.948420] ? inet_sendmsg+0x1f/0x70 [ 2172.948634] __sys_sendto+0x1cd/0x200 [ 2172.948848] ? find_held_lock+0x2b/0x80 [ 2172.949072] ? syscall_trace_enter+0x140/0x270 [ 2172.949330] ? __lock_release.isra.0+0x5e/0x170 [ 2172.949595] ? find_held_lock+0x2b/0x80 [ 2172.949817] ? syscall_trace_enter+0x140/0x270 [ 2172.950211] ? lockdep_hardirqs_on_prepare+0xda/0x190 [ 2172.950632] ? ktime_get_coarse_real_ts64+0xc2/0xd0 [ 2172.951036] __x64_sys_sendto+0x24/0x30 [ 2172.951382] do_syscall_64+0x90/0x170 ...... After calling bpf_exec_tx_verdict(), the size of msg_pl->sg may increase, e.g., when the BPF program executes bpf_msg_push_data(). If the BPF program sets cork_bytes and sg.size is smaller than cork_bytes, it will return -ENOSPC and attempt to roll back to the non-zero copy logic. However, during rollback, msg->msg_iter is reset, but since msg_pl->sg.size has been increased, subsequent executions will exceed the actual size of msg_iter. ''' iov_iter_revert(&msg->msg_iter, msg_pl->sg.size - orig_size); ''' The changes in this commit are based on the following considerations: 1. When cork_bytes is set, rolling back to non-zero copy logic is pointless and can directly go to zero-copy logic. 2. We can not calculate the correct number of bytes to revert msg_iter. Assume the original data is "abcdefgh" (8 bytes), and after 3 pushes by the BPF program, it becomes 11-byte data: "abc?de?fgh?". Then, we set cork_bytes to 6, which means the first 6 bytes have been processed, and the remaining 5 bytes "?fgh?" will be cached until the length meets the cork_bytes requirement. However, some data in "?fgh?" is not within 'sg->msg_iter' (but in msg_pl instead), especially the data "?" we pushed. So it doesn't seem as simple as just reverting through an offset of msg_iter. 3. For non-TLS sockets in tcp_bpf_sendmsg, when a "cork" situation occurs, the user-space send() doesn't return an error, and the returned length is the same as the input length parameter, even if some data is cached. Additionally, I saw that the current non-zero-copy logic for handling corking is written as: ''' line 1177 else if (ret != -EAGAIN) { if (ret == -ENOSPC) ret = 0; goto send_end; ''' So it's ok to just return 'copied' without error when a "cork" situation occurs. | ||||
| CVE-2025-38158 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: fix XQE dma address error The dma addresses of EQE and AEQE are wrong after migration and results in guest kernel-mode encryption services failure. Comparing the definition of hardware registers, we found that there was an error when the data read from the register was combined into an address. Therefore, the address combination sequence needs to be corrected. Even after fixing the above problem, we still have an issue where the Guest from an old kernel can get migrated to new kernel and may result in wrong data. In order to ensure that the address is correct after migration, if an old magic number is detected, the dma address needs to be updated. | ||||