| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wl1251: validate packet IDs before indexing tx_frames
wl1251_tx_packet_cb() uses the firmware completion ID directly to index
the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the
completion block, and the callback does not currently verify that it
fits the array before dereferencing it.
Reject completion IDs that fall outside wl->tx_frames[] and keep the
existing NULL check in the same guard. This keeps the fix local to the
trust boundary and avoids touching the rest of the completion flow. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, readVariableLengthInteger() decodes a variable-length integer from untrusted EXR input without bounding the shift count. After enough continuation bytes, the code executes a left shift by 70 on a 64-bit value, which is undefined behavior. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| telnetd in GNU inetutils through 2.7 allows an out-of-bounds write in the LINEMODE SLC (Set Local Characters) suboption handler because add_slc does not check whether the buffer is full. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.50, contain a use of weak credentials vulnerability. An unauthenticated attacker with local access could potentially exploit this vulnerability, leading to unauthorized access to the system. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate LTK enc_size on load
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate mesh send advertising payload length
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject root items with drop_progress and zero drop_level
[BUG]
When recovering relocation at mount time, merge_reloc_root() and
btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against
an impossible state: a non-zero drop_progress combined with a zero
drop_level in a root_item, which can be triggered:
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1545!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2
RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545
Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000
Call Trace:
merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861
btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195
btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130
open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640
btrfs_fill_super fs/btrfs/super.c:987 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1951 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline]
btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128
vfs_get_tree+0x9a/0x370 fs/super.c:1758
fc_mount fs/namespace.c:1199 [inline]
do_new_mount_fc fs/namespace.c:3642 [inline]
do_new_mount fs/namespace.c:3718 [inline]
path_mount+0x5b8/0x1ea0 fs/namespace.c:4028
do_mount fs/namespace.c:4041 [inline]
__do_sys_mount fs/namespace.c:4229 [inline]
__se_sys_mount fs/namespace.c:4206 [inline]
__x64_sys_mount+0x282/0x320 fs/namespace.c:4206
...
RIP: 0033:0x7f969c9a8fde
Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f
---[ end trace 0000000000000000 ]---
The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic
metadata fuzzing tool that corrupts btrfs metadata at runtime.
[CAUSE]
A non-zero drop_progress.objectid means an interrupted
btrfs_drop_snapshot() left a resume point on disk, and in that case
drop_level must be greater than 0 because the checkpoint is only
saved at internal node levels.
Although this invariant is enforced when the kernel writes the root
item, it is not validated when the root item is read back from disk.
That allows on-disk corruption to provide an invalid state with
drop_progress.objectid != 0 and drop_level == 0.
When relocation recovery later processes such a root item,
merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The
same invalid metadata can also trigger the corresponding BUG_ON() in
btrfs_drop_snapshot().
[FIX]
Fix this by validating the root_item invariant in tree-checker when
reading root items from disk: if drop_progress.objectid is non-zero,
drop_level must also be non-zero. Reject such malformed metadata with
-EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot()
and triggers the BUG_ON.
After the fix, the same corruption is correctly rejected by tree-checker
and the BUG_ON is no longer triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| An Out-of-bounds Read vulnerability in the IOCTL handler in ASUS System Control Interface allows a local user to cause system crash (BSOD) via a read size that exceeds the buffer size.Refer to the '
Security Update for MyASUSÂ ' section on the ASUS Security Advisory for more information. |
| A vulnerability has been found in Totolink X5000R 9.1.0u.6369_B20230113. This vulnerability affects the function sub_458E40 of the file /boafrm/formDdns. The manipulation of the argument submit-url leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. |
| Weak credentials in the CashDro 3 web administration panel, version 24.01.00.26, where the platform allows the use of numeric PINs for user authentication. The system supports the use of PIN-based credentials, maintaining compatibility with POS software integrations deployed since 2012. This could allow an attacker to easily perform a brute-force attack against a user and gain access by trying different PINs without the account being locked. Successful exploitation of this vulnerability could result in unauthorized access to confidential configuration settings, compromising the security of the system. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: tighten UMEM headroom validation to account for tailroom and min frame
The current headroom validation in xdp_umem_reg() could leave us with
insufficient space dedicated to even receive minimum-sized ethernet
frame. Furthermore if multi-buffer would come to play then
skb_shared_info stored at the end of XSK frame would be corrupted.
HW typically works with 128-aligned sizes so let us provide this value
as bare minimum.
Multi-buffer setting is known later in the configuration process so
besides accounting for 128 bytes, let us also take care of tailroom space
upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ioam6: fix OOB and missing lock
When trace->type.bit6 is set:
if (trace->type.bit6) {
...
queue = skb_get_tx_queue(dev, skb);
qdisc = rcu_dereference(queue->qdisc);
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: handle wraparound when searching for blocks for indirect mapped blocks
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups(). |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.14, Heimdall performs host matching in a case-sensitive manner, while HTTP hostnames are case-insensitive. This discrepancy can result in heimdall failing to match a rule for a request host that differs only in letter casing, potentially causing the request to be classified differently than intended. This issue has been patched in version 0.17.14. |
| HCL DFXAnalytics is affected by a Using Components with Known Vulnerabilities flaw where the application utilizes unpatched libraries or sub-components, which could allow an attacker to identify and exploit publicly known security vulnerabilities to gain unauthorized access or compromise the application. |
