| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Belledonne Communications Linphone-Desktop
is vulnerable to a NULL Dereference vulnerability, which could allow a remote attacker to create a denial-of-service condition. |
| A null pointer dereference vulnerability in Macrium Reflect prior to 8.1.8017 allows a local attacker to cause a system crash or potentially elevate their privileges via executing a specially crafted executable. |
| JGraphT Core v1.5.2 was discovered to contain a NullPointerException via the component org.jgrapht.alg.util.ToleranceDoubleComparator::compare(Double, Double). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In NanoMQ version 0.24.6, after enabling auth.http_auth (HTTP authentication), when a client connects to the broker using MQTT CONNECT without providing username/password, and the configuration params uses the placeholders %u / %P (e.g., username="%u", password="%P"), the HTTP request construction phase enters auth_http.c:set_data(). This results in calling strlen() on a NULL pointer, causing a SIGSEGV crash. This crash can be triggered remotely, resulting in a denial of service. This issue has been patched in version 0.24.7. |
| Null pointer dereference in Microsoft Graphics Component allows an unauthorized attacker to deny service locally. |
| Null pointer dereference in Windows Performance Counters allows an authorized attacker to elevate privileges locally. |
| Null pointer dereference in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Fix an unlikely NULL pointer deference at probe
intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
initialized, and dmc is thus NULL.
That would be the case when the call path is
intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
intel_power_domains_init_hw() is called *before* intel_dmc_init().
However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
conditionally, depending on the current and target DC states. At probe,
the target is disabled, but if DC6 is enabled, the function is called,
and an oops follows. Apparently it's quite unlikely that DC6 is enabled
at probe, as we haven't seen this failure mode before.
It is also strange to have DC6 enabled at boot, since that would require
the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and
the driver stopping / reprogramming the firmware is a poorly specified
sequence and as such unlikely an intentional BIOS behaviour. It's more
likely that BIOS is leaving an unintentionally enabled DC6 HW state
behind (without actually loading the required DMC firmware for this).
The tracking of the DC6 allowed counter only works if starting /
stopping the counter depends on the _SW_ DC6 state vs. the current _HW_
DC6 state (since stopping the counter requires the DC5 counter captured
when the counter was started). Thus, using the HW DC6 state is incorrect
and it also leads to the above oops. Fix both issues by using the SW DC6
state for the tracking.
This is v2 of the fix originally sent by Jani, updated based on the
first Link: discussion below.
(cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Add NULL pointer check to trigger_data_free()
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: fix null-pointer dereference on local read error
In drbd_request_endio(), READ_COMPLETED_WITH_ERROR is passed to
__req_mod() with a NULL peer_device:
__req_mod(req, what, NULL, &m);
The READ_COMPLETED_WITH_ERROR handler then unconditionally passes this
NULL peer_device to drbd_set_out_of_sync(), which dereferences it,
causing a null-pointer dereference.
Fix this by obtaining the peer_device via first_peer_device(device),
matching how drbd_req_destroy() handles the same situation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix potential NULL pointer dereference in header processing
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50 |
| Suricata is a network IDS, IPS and NSM engine. From version 8.0.0 to before version 8.0.4, use of the "tls.alpn" rule keyword can cause Suricata to crash with a NULL dereference. This issue has been patched in version 8.0.4. |
| Ella Core is a 5G core designed for private networks. Prior to version 1.8.0, Ella Core panics when processing a NGAP handover failure message. An attacker able to cause a gNodeB to send NGAP handover failure messages to Ella Core can crash the process, causing service disruption for all connected subscribers. This issue has been patched in version 1.8.0. |
| A race condition during TCP connection teardown can cause tcp_recv() to operate on a connection that has already been released. If tcp_conn_search() returns NULL while processing a SYN packet, a NULL pointer derived from stale context data is passed to tcp_backlog_is_full() and dereferenced without validation, leading to a crash. |
| An issue was discovered in Mbed TLS through 3.6.5 and 4.x through 4.0.0. There is a NULL pointer dereference in distinguished name parsing that allows an attacker to write to address 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: allow ext4_get_group_info() to fail
Previously, ext4_get_group_info() would treat an invalid group number
as BUG(), since in theory it should never happen. However, if a
malicious attaker (or fuzzer) modifies the superblock via the block
device while it is the file system is mounted, it is possible for
s_first_data_block to get set to a very large number. In that case,
when calculating the block group of some block number (such as the
starting block of a preallocation region), could result in an
underflow and very large block group number. Then the BUG_ON check in
ext4_get_group_info() would fire, resutling in a denial of service
attack that can be triggered by root or someone with write access to
the block device.
For a quality of implementation perspective, it's best that even if
the system administrator does something that they shouldn't, that it
will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info()
will call ext4_error and return NULL. We also add fallback code in
all of the callers of ext4_get_group_info() that it might NULL.
Also, since ext4_get_group_info() was already borderline to be an
inline function, un-inline it. The results in a next reduction of the
compiled text size of ext4 by roughly 2k. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Reinit blkg_iostat_set after clearing in blkcg_reset_stats()
When blkg_alloc() is called to allocate a blkcg_gq structure
with the associated blkg_iostat_set's, there are 2 fields within
blkg_iostat_set that requires proper initialization - blkg & sync.
The former field was introduced by commit 3b8cc6298724 ("blk-cgroup:
Optimize blkcg_rstat_flush()") while the later one was introduced by
commit f73316482977 ("blk-cgroup: reimplement basic IO stats using
cgroup rstat").
Unfortunately those fields in the blkg_iostat_set's are not properly
re-initialized when they are cleared in v1's blkcg_reset_stats(). This
can lead to a kernel panic due to NULL pointer access of the blkg
pointer. The missing initialization of sync is less problematic and
can be a problem in a debug kernel due to missing lockdep initialization.
Fix these problems by re-initializing them after memory clearing. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Harden uplink netdev access against device unbind
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: fix time stamp counter initialization
If the gs_usb device driver is unloaded (or unbound) before the
interface is shut down, the USB stack first calls the struct
usb_driver::disconnect and then the struct net_device_ops::ndo_stop
callback.
In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more
RX'ed CAN frames are send from the USB device to the host. Later in
gs_can_close() a reset control message is send to each CAN channel to
remove the controller from the CAN bus. In this race window the USB
device can still receive CAN frames from the bus and internally queue
them to be send to the host.
At least in the current version of the candlelight firmware, the queue
of received CAN frames is not emptied during the reset command. After
loading (or binding) the gs_usb driver, new URBs are submitted during
the struct net_device_ops::ndo_open callback and the candlelight
firmware starts sending its already queued CAN frames to the host.
However, this scenario was not considered when implementing the
hardware timestamp function. The cycle counter/time counter
infrastructure is set up (gs_usb_timestamp_init()) after the USBs are
submitted, resulting in a NULL pointer dereference if
timecounter_cyc2time() (via the call chain:
gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() ->
gs_usb_skb_set_timestamp()) is called too early.
Move the gs_usb_timestamp_init() function before the URBs are
submitted to fix this problem.
For a comprehensive solution, we need to consider gs_usb devices with
more than 1 channel. The cycle counter/time counter infrastructure is
setup per channel, but the RX URBs are per device. Once gs_can_open()
of _a_ channel has been called, and URBs have been submitted, the
gs_usb_receive_bulk_callback() can be called for _all_ available
channels, even for channels that are not running, yet. As cycle
counter/time counter has not set up, this will again lead to a NULL
pointer dereference.
Convert the cycle counter/time counter from a "per channel" to a "per
device" functionality. Also set it up, before submitting any URBs to
the device.
Further in gs_usb_receive_bulk_callback(), don't process any URBs for
not started CAN channels, only resubmit the URB. |
