{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2022-50704", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-12-24T10:53:15.518Z", "datePublished": "2025-12-24T10:55:19.295Z", "dateUpdated": "2026-05-11T19:23:52.960Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T19:23:52.960Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nUSB: gadget: Fix use-after-free during usb config switch\n\nIn the process of switching USB config from rndis to other config,\nif the hardware does not support the ->pullup callback, or the\nhardware encounters a low probability fault, both of them may cause\nthe ->pullup callback to fail, which will then cause a system panic\n(use after free).\n\nThe gadget drivers sometimes need to be unloaded regardless of the\nhardware's behavior.\n\nAnalysis as follows:\n=======================================================================\n(1) write /config/usb_gadget/g1/UDC \"none\"\n\ngether_disconnect+0x2c/0x1f8\nrndis_disable+0x4c/0x74\ncomposite_disconnect+0x74/0xb0\nconfigfs_composite_disconnect+0x60/0x7c\nusb_gadget_disconnect+0x70/0x124\nusb_gadget_unregister_driver+0xc8/0x1d8\ngadget_dev_desc_UDC_store+0xec/0x1e4\n\n(2) rm /config/usb_gadget/g1/configs/b.1/f1\n\nrndis_deregister+0x28/0x54\nrndis_free+0x44/0x7c\nusb_put_function+0x14/0x1c\nconfig_usb_cfg_unlink+0xc4/0xe0\nconfigfs_unlink+0x124/0x1c8\nvfs_unlink+0x114/0x1dc\n\n(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4\n\npanic+0x1fc/0x3d0\ndo_page_fault+0xa8/0x46c\ndo_mem_abort+0x3c/0xac\nel1_sync_handler+0x40/0x78\n0xffffff801138f880\nrndis_close+0x28/0x34\neth_stop+0x74/0x110\ndev_close_many+0x48/0x194\nrollback_registered_many+0x118/0x814\nunregister_netdev+0x20/0x30\ngether_cleanup+0x1c/0x38\nrndis_attr_release+0xc/0x14\nkref_put+0x74/0xb8\nconfigfs_rmdir+0x314/0x374\n\nIf gadget->ops->pullup() return an error, function rndis_close() will be\ncalled, then it will causes a use-after-free problem.\n======================================================================="}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/usb/gadget/udc/core.c"], "versions": [{"version": "0a55187a1ec8c03d0619e7ce41d10fdc39cff036", "lessThan": "30e926aa835ac2e6ad05822e4cb75833feb0d99f", "status": "affected", "versionType": "git"}, {"version": "0a55187a1ec8c03d0619e7ce41d10fdc39cff036", "lessThan": "99a58ac42d9b6911834b0224b6782aea0c311346", "status": "affected", "versionType": "git"}, {"version": "0a55187a1ec8c03d0619e7ce41d10fdc39cff036", "lessThan": "afdc12887f2b2ecf20d065a7d81ad29824155083", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/usb/gadget/udc/core.c"], "versions": [{"version": "4.20", "status": "affected"}, {"version": "0", "lessThan": "4.20", "status": "unaffected", "versionType": "semver"}, {"version": "6.0.16", "lessThanOrEqual": "6.0.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.2", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.2", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.20", "versionEndExcluding": "6.0.16"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.20", "versionEndExcluding": "6.1.2"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.20", "versionEndExcluding": "6.2"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/30e926aa835ac2e6ad05822e4cb75833feb0d99f"}, {"url": "https://git.kernel.org/stable/c/99a58ac42d9b6911834b0224b6782aea0c311346"}, {"url": "https://git.kernel.org/stable/c/afdc12887f2b2ecf20d065a7d81ad29824155083"}], "title": "USB: gadget: Fix use-after-free during usb config switch", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nUSB: gadget: Fix use-after-free during usb config switch\n\nIn the process of switching USB config from rndis to other config,\nif the hardware does not support the ->pullup callback, or the\nhardware encounters a low probability fault, both of them may cause\nthe ->pullup callback to fail, which will then cause a system panic\n(use after free).\n\nThe gadget drivers sometimes need to be unloaded regardless of the\nhardware's behavior.\n\nAnalysis as follows:\n=======================================================================\n(1) write /config/usb_gadget/g1/UDC \"none\"\n\ngether_disconnect+0x2c/0x1f8\nrndis_disable+0x4c/0x74\ncomposite_disconnect+0x74/0xb0\nconfigfs_composite_disconnect+0x60/0x7c\nusb_gadget_disconnect+0x70/0x124\nusb_gadget_unregister_driver+0xc8/0x1d8\ngadget_dev_desc_UDC_store+0xec/0x1e4\n\n(2) rm /config/usb_gadget/g1/configs/b.1/f1\n\nrndis_deregister+0x28/0x54\nrndis_free+0x44/0x7c\nusb_put_function+0x14/0x1c\nconfig_usb_cfg_unlink+0xc4/0xe0\nconfigfs_unlink+0x124/0x1c8\nvfs_unlink+0x114/0x1dc\n\n(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4\n\npanic+0x1fc/0x3d0\ndo_page_fault+0xa8/0x46c\ndo_mem_abort+0x3c/0xac\nel1_sync_handler+0x40/0x78\n0xffffff801138f880\nrndis_close+0x28/0x34\neth_stop+0x74/0x110\ndev_close_many+0x48/0x194\nrollback_registered_many+0x118/0x814\nunregister_netdev+0x20/0x30\ngether_cleanup+0x1c/0x38\nrndis_attr_release+0xc/0x14\nkref_put+0x74/0xb8\nconfigfs_rmdir+0x314/0x374\n\nIf gadget->ops->pullup() return an error, function rndis_close() will be\ncalled, then it will causes a use-after-free problem.\n======================================================================="}], "id": "CVE-2022-50704", "lastModified": "2026-04-15T00:35:42.020", "metrics": {}, "published": "2025-12-24T11:15:50.573", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/30e926aa835ac2e6ad05822e4cb75833feb0d99f"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/99a58ac42d9b6911834b0224b6782aea0c311346"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/afdc12887f2b2ecf20d065a7d81ad29824155083"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Deferred"}

{"bugzilla": {"description": "kernel: USB: gadget: Fix use-after-free during usb config switch", "id": "2424995", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2424995"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "details": ["In the Linux kernel, the following vulnerability has been resolved:\nUSB: gadget: Fix use-after-free during usb config switch\nIn the process of switching USB config from rndis to other config,\nif the hardware does not support the ->pullup callback, or the\nhardware encounters a low probability fault, both of them may cause\nthe ->pullup callback to fail, which will then cause a system panic\n(use after free).\nThe gadget drivers sometimes need to be unloaded regardless of the\nhardware's behavior.\nAnalysis as follows:\n=======================================================================\n(1) write /config/usb_gadget/g1/UDC \"none\"\ngether_disconnect+0x2c/0x1f8\nrndis_disable+0x4c/0x74\ncomposite_disconnect+0x74/0xb0\nconfigfs_composite_disconnect+0x60/0x7c\nusb_gadget_disconnect+0x70/0x124\nusb_gadget_unregister_driver+0xc8/0x1d8\ngadget_dev_desc_UDC_store+0xec/0x1e4\n(2) rm /config/usb_gadget/g1/configs/b.1/f1\nrndis_deregister+0x28/0x54\nrndis_free+0x44/0x7c\nusb_put_function+0x14/0x1c\nconfig_usb_cfg_unlink+0xc4/0xe0\nconfigfs_unlink+0x124/0x1c8\nvfs_unlink+0x114/0x1dc\n(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4\npanic+0x1fc/0x3d0\ndo_page_fault+0xa8/0x46c\ndo_mem_abort+0x3c/0xac\nel1_sync_handler+0x40/0x78\n0xffffff801138f880\nrndis_close+0x28/0x34\neth_stop+0x74/0x110\ndev_close_many+0x48/0x194\nrollback_registered_many+0x118/0x814\nunregister_netdev+0x20/0x30\ngether_cleanup+0x1c/0x38\nrndis_attr_release+0xc/0x14\nkref_put+0x74/0xb8\nconfigfs_rmdir+0x314/0x374\nIf gadget->ops->pullup() return an error, function rndis_close() will be\ncalled, then it will causes a use-after-free problem.\n======================================================================="], "name": "CVE-2022-50704", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-12-24T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2022-50704\nhttps://nvd.nist.gov/vuln/detail/CVE-2022-50704\nhttps://lore.kernel.org/linux-cve-announce/2025122419-CVE-2022-50704-ca2b@gregkh/T"], "threat_severity": "Low"}

{}