{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2023-53530", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-10-01T11:39:39.408Z", "datePublished": "2025-10-01T11:46:15.075Z", "dateUpdated": "2026-05-11T19:46:45.450Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T19:46:45.450Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()\n\nThe following call trace was observed:\n\nlocalhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete\nlocalhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092\nlocalhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN \"nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291\"\nlocalhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]\nlocalhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1\nlocalhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022\nlocalhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core]\nlocalhost kernel: Call Trace:\nlocalhost kernel: dump_stack_lvl+0x57/0x7d\nlocalhost kernel: check_preemption_disabled+0xc8/0xd0\nlocalhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]\n\nUse raw_smp_processor_id() instead of smp_processor_id().\n\nAlso use queue_work() across the driver instead of queue_work_on() thus\navoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/scsi/qla2xxx/qla_inline.h", "drivers/scsi/qla2xxx/qla_isr.c", "drivers/scsi/qla2xxx/qla_target.c", "drivers/scsi/qla2xxx/tcm_qla2xxx.c"], "versions": [{"version": "532a239605667320f4fd7473e416b718d0a2fbbb", "lessThan": "1a541999f31fcb10ea50eba2a563e6c451fd5c7d", "status": "affected", "versionType": "git"}, {"version": "35c02a333d523d9da0b482b0d751cdeb95c068ae", "lessThan": "52c7b41ad6ee53222f4ee2f0c099a6ed8291a168", "status": "affected", "versionType": "git"}, {"version": "1d201c81d4cc6840735bbcc99e6031503e5cf3b8", "lessThan": "25bd0c7def04a272f8e89b36971712fe29c6e438", "status": "affected", "versionType": "git"}, {"version": "1d201c81d4cc6840735bbcc99e6031503e5cf3b8", "lessThan": "59f10a05b5c7b675256a66e3161741239889ff80", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/scsi/qla2xxx/qla_inline.h", "drivers/scsi/qla2xxx/qla_isr.c", "drivers/scsi/qla2xxx/qla_target.c", "drivers/scsi/qla2xxx/tcm_qla2xxx.c"], "versions": [{"version": "6.3", "status": "affected"}, {"version": "0", "lessThan": "6.3", "status": "unaffected", "versionType": "semver"}, {"version": "6.5.5", "lessThanOrEqual": "6.5.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.3", "versionEndExcluding": "6.5.5"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.3", "versionEndExcluding": "6.6"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/1a541999f31fcb10ea50eba2a563e6c451fd5c7d"}, {"url": "https://git.kernel.org/stable/c/52c7b41ad6ee53222f4ee2f0c099a6ed8291a168"}, {"url": "https://git.kernel.org/stable/c/25bd0c7def04a272f8e89b36971712fe29c6e438"}, {"url": "https://git.kernel.org/stable/c/59f10a05b5c7b675256a66e3161741239889ff80"}], "title": "scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "F961E4E2-B3B0-4061-AA7B-6262FE78F9D0", "versionEndExcluding": "6.5.5", "versionStartIncluding": "6.3", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.6:rc1:*:*:*:*:*:*", "matchCriteriaId": "84267A4F-DBC2-444F-B41D-69E15E1BEC97", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()\n\nThe following call trace was observed:\n\nlocalhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete\nlocalhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092\nlocalhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN \"nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291\"\nlocalhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]\nlocalhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1\nlocalhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022\nlocalhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core]\nlocalhost kernel: Call Trace:\nlocalhost kernel: dump_stack_lvl+0x57/0x7d\nlocalhost kernel: check_preemption_disabled+0xc8/0xd0\nlocalhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]\n\nUse raw_smp_processor_id() instead of smp_processor_id().\n\nAlso use queue_work() across the driver instead of queue_work_on() thus\navoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled."}], "id": "CVE-2023-53530", "lastModified": "2026-03-25T00:50:16.470", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2025-10-01T12:15:57.710", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/1a541999f31fcb10ea50eba2a563e6c451fd5c7d"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/25bd0c7def04a272f8e89b36971712fe29c6e438"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/52c7b41ad6ee53222f4ee2f0c099a6ed8291a168"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/59f10a05b5c7b675256a66e3161741239889ff80"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()", "id": "2400733", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2400733"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.0", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H", "status": "draft"}, "details": ["No description is available for this CVE."], "name": "CVE-2023-53530", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:rhivos:1", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat In-Vehicle Operating System 1"}], "public_date": "2025-10-01T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2023-53530\nhttps://nvd.nist.gov/vuln/detail/CVE-2023-53530\nhttps://lore.kernel.org/linux-cve-announce/2025100136-CVE-2023-53530-853b@gregkh/T"], "threat_severity": "Moderate"}

{"created": "2025-10-02T08:38:52.100962+00:00", "updated": "2025-10-02T08:38:52.101014+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}