{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2024-56618", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-12-27T14:03:06.016Z", "datePublished": "2024-12-27T14:51:22.592Z", "dateUpdated": "2026-05-11T20:55:56.895Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T20:55:56.895Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npmdomain: imx: gpcv2: Adjust delay after power up handshake\n\nThe udelay(5) is not enough, sometimes below kernel panic\nstill be triggered:\n\n[ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt\n[ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1\n[ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)\n[ 4.012985] Call trace:\n[...]\n[ 4.013029] arm64_serror_panic+0x64/0x70\n[ 4.013034] do_serror+0x3c/0x70\n[ 4.013039] el1h_64_error_handler+0x30/0x54\n[ 4.013046] el1h_64_error+0x64/0x68\n[ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48\n[ 4.013059] __genpd_runtime_resume+0x30/0x80\n[ 4.013066] genpd_runtime_resume+0x114/0x29c\n[ 4.013073] __rpm_callback+0x48/0x1e0\n[ 4.013079] rpm_callback+0x68/0x80\n[ 4.013084] rpm_resume+0x3bc/0x6a0\n[ 4.013089] __pm_runtime_resume+0x50/0x9c\n[ 4.013095] pm_runtime_get_suppliers+0x60/0x8c\n[ 4.013101] __driver_probe_device+0x4c/0x14c\n[ 4.013108] driver_probe_device+0x3c/0x120\n[ 4.013114] __driver_attach+0xc4/0x200\n[ 4.013119] bus_for_each_dev+0x7c/0xe0\n[ 4.013125] driver_attach+0x24/0x30\n[ 4.013130] bus_add_driver+0x110/0x240\n[ 4.013135] driver_register+0x68/0x124\n[ 4.013142] __platform_driver_register+0x24/0x30\n[ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma]\n[ 4.013163] do_one_initcall+0x60/0x1e0\n[ 4.013168] do_init_module+0x5c/0x21c\n[ 4.013175] load_module+0x1a98/0x205c\n[ 4.013181] init_module_from_file+0x88/0xd4\n[ 4.013187] __arm64_sys_finit_module+0x258/0x350\n[ 4.013194] invoke_syscall.constprop.0+0x50/0xe0\n[ 4.013202] do_el0_svc+0xa8/0xe0\n[ 4.013208] el0_svc+0x3c/0x140\n[ 4.013215] el0t_64_sync_handler+0x120/0x12c\n[ 4.013222] el0t_64_sync+0x190/0x194\n[ 4.013228] SMP: stopping secondary CPUs\n\nThe correct way is to wait handshake, but it needs BUS clock of\nBLK-CTL be enabled, which is in separate driver. So delay is the\nonly option here. The udelay(10) is a data got by experiment."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/pmdomain/imx/gpcv2.c"], "versions": [{"version": "e8dc41afca161b988e6d462f4d0803d247e22250", "lessThan": "a63907c8c712414643b597debcd09d16b6827b23", "status": "affected", "versionType": "git"}, {"version": "e8dc41afca161b988e6d462f4d0803d247e22250", "lessThan": "2379fb937de5333991c567eefd7d11b98977d059", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/pmdomain/imx/gpcv2.c"], "versions": [{"version": "6.10", "status": "affected"}, {"version": "0", "lessThan": "6.10", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.5", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.13", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.10", "versionEndExcluding": "6.12.5"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.10", "versionEndExcluding": "6.13"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/a63907c8c712414643b597debcd09d16b6827b23"}, {"url": "https://git.kernel.org/stable/c/2379fb937de5333991c567eefd7d11b98977d059"}], "title": "pmdomain: imx: gpcv2: Adjust delay after power up handshake", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 5.5, "attackVector": "LOCAL", "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "integrityImpact": "NONE", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "NONE"}}, {"other": {"type": "ssvc", "content": {"id": "CVE-2024-56618", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2025-10-01T20:01:00.196210Z"}}}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "description": "CWE-noinfo Not enough information"}]}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-10-01T20:07:12.826Z"}}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 5.5, "attackVector": "LOCAL", "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "integrityImpact": "NONE", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "NONE"}}, {"other": {"type": "ssvc", "content": {"id": "CVE-2024-56618", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2025-10-01T20:01:00.196210Z"}}}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "description": "CWE-noinfo Not enough information"}]}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-10-01T15:43:31.485Z"}}], "cna": {"title": "pmdomain: imx: gpcv2: Adjust delay after power up handshake", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "e8dc41afca161b988e6d462f4d0803d247e22250", "lessThan": "a63907c8c712414643b597debcd09d16b6827b23", "versionType": "git"}, {"status": "affected", "version": "e8dc41afca161b988e6d462f4d0803d247e22250", "lessThan": "2379fb937de5333991c567eefd7d11b98977d059", "versionType": "git"}], "programFiles": ["drivers/pmdomain/imx/gpcv2.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "6.10"}, {"status": "unaffected", "version": "0", "lessThan": "6.10", "versionType": "semver"}, {"status": "unaffected", "version": "6.12.5", "versionType": "semver", "lessThanOrEqual": "6.12.*"}, {"status": "unaffected", "version": "6.13", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["drivers/pmdomain/imx/gpcv2.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/a63907c8c712414643b597debcd09d16b6827b23"}, {"url": "https://git.kernel.org/stable/c/2379fb937de5333991c567eefd7d11b98977d059"}], "x_generator": {"engine": "bippy-1.2.0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npmdomain: imx: gpcv2: Adjust delay after power up handshake\n\nThe udelay(5) is not enough, sometimes below kernel panic\nstill be triggered:\n\n[ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt\n[ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1\n[ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)\n[ 4.012985] Call trace:\n[...]\n[ 4.013029] arm64_serror_panic+0x64/0x70\n[ 4.013034] do_serror+0x3c/0x70\n[ 4.013039] el1h_64_error_handler+0x30/0x54\n[ 4.013046] el1h_64_error+0x64/0x68\n[ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48\n[ 4.013059] __genpd_runtime_resume+0x30/0x80\n[ 4.013066] genpd_runtime_resume+0x114/0x29c\n[ 4.013073] __rpm_callback+0x48/0x1e0\n[ 4.013079] rpm_callback+0x68/0x80\n[ 4.013084] rpm_resume+0x3bc/0x6a0\n[ 4.013089] __pm_runtime_resume+0x50/0x9c\n[ 4.013095] pm_runtime_get_suppliers+0x60/0x8c\n[ 4.013101] __driver_probe_device+0x4c/0x14c\n[ 4.013108] driver_probe_device+0x3c/0x120\n[ 4.013114] __driver_attach+0xc4/0x200\n[ 4.013119] bus_for_each_dev+0x7c/0xe0\n[ 4.013125] driver_attach+0x24/0x30\n[ 4.013130] bus_add_driver+0x110/0x240\n[ 4.013135] driver_register+0x68/0x124\n[ 4.013142] __platform_driver_register+0x24/0x30\n[ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma]\n[ 4.013163] do_one_initcall+0x60/0x1e0\n[ 4.013168] do_init_module+0x5c/0x21c\n[ 4.013175] load_module+0x1a98/0x205c\n[ 4.013181] init_module_from_file+0x88/0xd4\n[ 4.013187] __arm64_sys_finit_module+0x258/0x350\n[ 4.013194] invoke_syscall.constprop.0+0x50/0xe0\n[ 4.013202] do_el0_svc+0xa8/0xe0\n[ 4.013208] el0_svc+0x3c/0x140\n[ 4.013215] el0t_64_sync_handler+0x120/0x12c\n[ 4.013222] el0t_64_sync+0x190/0x194\n[ 4.013228] SMP: stopping secondary CPUs\n\nThe correct way is to wait handshake, but it needs BUS clock of\nBLK-CTL be enabled, which is in separate driver. So delay is the\nonly option here. The udelay(10) is a data got by experiment."}], "cpeApplicability": [{"nodes": [{"negate": false, "cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.12.5", "versionStartIncluding": "6.10"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.13", "versionStartIncluding": "6.10"}], "operator": "OR"}]}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T10:00:03.875Z"}}}, "cveMetadata": {"cveId": "CVE-2024-56618", "state": "PUBLISHED", "dateUpdated": "2025-10-01T20:07:12.826Z", "dateReserved": "2024-12-27T14:03:06.016Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2024-12-27T14:51:22.592Z", "assignerShortName": "Linux"}, "dataVersion": "5.1"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "DC342DCB-0FE7-49A9-8291-3E1FCB51A530", "versionEndExcluding": "6.12.5", "versionStartIncluding": "6.10", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.13:rc1:*:*:*:*:*:*", "matchCriteriaId": "62567B3C-6CEE-46D0-BC2E-B3717FBF7D13", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npmdomain: imx: gpcv2: Adjust delay after power up handshake\n\nThe udelay(5) is not enough, sometimes below kernel panic\nstill be triggered:\n\n[ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt\n[ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1\n[ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)\n[ 4.012985] Call trace:\n[...]\n[ 4.013029] arm64_serror_panic+0x64/0x70\n[ 4.013034] do_serror+0x3c/0x70\n[ 4.013039] el1h_64_error_handler+0x30/0x54\n[ 4.013046] el1h_64_error+0x64/0x68\n[ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48\n[ 4.013059] __genpd_runtime_resume+0x30/0x80\n[ 4.013066] genpd_runtime_resume+0x114/0x29c\n[ 4.013073] __rpm_callback+0x48/0x1e0\n[ 4.013079] rpm_callback+0x68/0x80\n[ 4.013084] rpm_resume+0x3bc/0x6a0\n[ 4.013089] __pm_runtime_resume+0x50/0x9c\n[ 4.013095] pm_runtime_get_suppliers+0x60/0x8c\n[ 4.013101] __driver_probe_device+0x4c/0x14c\n[ 4.013108] driver_probe_device+0x3c/0x120\n[ 4.013114] __driver_attach+0xc4/0x200\n[ 4.013119] bus_for_each_dev+0x7c/0xe0\n[ 4.013125] driver_attach+0x24/0x30\n[ 4.013130] bus_add_driver+0x110/0x240\n[ 4.013135] driver_register+0x68/0x124\n[ 4.013142] __platform_driver_register+0x24/0x30\n[ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma]\n[ 4.013163] do_one_initcall+0x60/0x1e0\n[ 4.013168] do_init_module+0x5c/0x21c\n[ 4.013175] load_module+0x1a98/0x205c\n[ 4.013181] init_module_from_file+0x88/0xd4\n[ 4.013187] __arm64_sys_finit_module+0x258/0x350\n[ 4.013194] invoke_syscall.constprop.0+0x50/0xe0\n[ 4.013202] do_el0_svc+0xa8/0xe0\n[ 4.013208] el0_svc+0x3c/0x140\n[ 4.013215] el0t_64_sync_handler+0x120/0x12c\n[ 4.013222] el0t_64_sync+0x190/0x194\n[ 4.013228] SMP: stopping secondary CPUs\n\nThe correct way is to wait handshake, but it needs BUS clock of\nBLK-CTL be enabled, which is in separate driver. So delay is the\nonly option here. The udelay(10) is a data got by experiment."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: pmdomain: imx: gpcv2: Ajuste del retraso despu\u00e9s del protocolo de enlace de encendido El udelay(5) no es suficiente, a veces el p\u00e1nico del kernel a\u00fan se puede activar: [ 4.012973] P\u00e1nico del kernel: no sincroniza: Interrupci\u00f3n de error asincr\u00f3nica [ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) No contaminado 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1 [ 4.012982] Nombre del hardware: Toradex Verdin iMX8M Plus WB en placa Dahlia (DT) [ 4.012985] Rastreo de llamadas: [...] [ 4.013029] arm64_serror_panic+0x64/0x70 [ 4.013034] do_serror+0x3c/0x70 [ 4.013039] el1h_64_error_handler+0x30/0x54 [ 4.013046] el1h_64_error+0x64/0x68 [ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48 [ 4.013059] __genpd_runtime_resume+0x30/0x80 [ 4.013066] genpd_runtime_resume+0x114/0x29c [ 4.013073] __rpm_callback+0x48/0x1e0 [ 4.013079] rpm_callback+0x68/0x80 [ 4.013084] rpm_resume+0x3bc/0x6a0 [ 4.013089] __pm_runtime_resume+0x50/0x9c [ 4.013095] pm_runtime_get_suppliers+0x60/0x8c [ 4.013101] __driver_probe_device+0x4c/0x14c [ 4.013108] driver_probe_device+0x3c/0x120 [ 4.013114] __driver_attach+0xc4/0x200 [ 4.013119] bus_for_each_dev+0x7c/0xe0 [ 4.013125] driver_attach+0x24/0x30 [ 4.013130] bus_add_driver+0x110/0x240 [ 4.013135] driver_register+0x68/0x124 [ 4.013142] __platform_driver_register+0x24/0x30 [ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma] [ 4.013163] do_one_initcall+0x60/0x1e0 [ 4.013168] do_init_module+0x5c/0x21c [ 4.013175] load_module+0x1a98/0x205c [ 4.013181] init_module_from_file+0x88/0xd4 [ 4.013187] __arm64_sys_finit_module+0x258/0x350 [ 4.013194] anybody_syscall.constprop.0+0x50/0xe0 [ 4.013202] anyone_syscall.constprop.0+0x50/0xe0 [ 4.013202] anyone_syscall.constprop.0+0x50/0xe0 [ 4.013208] anyone_syscall.constprop.0+0x3c/0x140 [ 4.013215] anyone_sysvc+0x120/0x12c [ 4.013222] anyone_sysvc+0x3c/0x140 [ 4.013215] anyone_sysvc+0x120/0x12c [ 4.013222] anyone_sys_sync+0x190/0x194 [ 4.013228] SMP: deteniendo CPUs secundarias La forma correcta es esperar el protocolo de enlace, pero necesita que el reloj BUS de BLK-CTL est\u00e9 habilitado, lo cual est\u00e1 en un controlador separado. Entonces, el retraso es la \u00fanica opci\u00f3n aqu\u00ed. Udelay(10) es un dato obtenido mediante experimento."}], "id": "CVE-2024-56618", "lastModified": "2025-10-01T20:17:32.313", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}, {"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary"}]}, "published": "2024-12-27T15:15:21.337", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/2379fb937de5333991c567eefd7d11b98977d059"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/a63907c8c712414643b597debcd09d16b6827b23"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: pmdomain: imx: gpcv2: Adjust delay after power up handshake", "id": "2334437", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2334437"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "cwe": "CWE-662", "details": ["In the Linux kernel, the following vulnerability has been resolved:\npmdomain: imx: gpcv2: Adjust delay after power up handshake\nThe udelay(5) is not enough, sometimes below kernel panic\nstill be triggered:\n[ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt\n[ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1\n[ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)\n[ 4.012985] Call trace:\n[...]\n[ 4.013029] arm64_serror_panic+0x64/0x70\n[ 4.013034] do_serror+0x3c/0x70\n[ 4.013039] el1h_64_error_handler+0x30/0x54\n[ 4.013046] el1h_64_error+0x64/0x68\n[ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48\n[ 4.013059] __genpd_runtime_resume+0x30/0x80\n[ 4.013066] genpd_runtime_resume+0x114/0x29c\n[ 4.013073] __rpm_callback+0x48/0x1e0\n[ 4.013079] rpm_callback+0x68/0x80\n[ 4.013084] rpm_resume+0x3bc/0x6a0\n[ 4.013089] __pm_runtime_resume+0x50/0x9c\n[ 4.013095] pm_runtime_get_suppliers+0x60/0x8c\n[ 4.013101] __driver_probe_device+0x4c/0x14c\n[ 4.013108] driver_probe_device+0x3c/0x120\n[ 4.013114] __driver_attach+0xc4/0x200\n[ 4.013119] bus_for_each_dev+0x7c/0xe0\n[ 4.013125] driver_attach+0x24/0x30\n[ 4.013130] bus_add_driver+0x110/0x240\n[ 4.013135] driver_register+0x68/0x124\n[ 4.013142] __platform_driver_register+0x24/0x30\n[ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma]\n[ 4.013163] do_one_initcall+0x60/0x1e0\n[ 4.013168] do_init_module+0x5c/0x21c\n[ 4.013175] load_module+0x1a98/0x205c\n[ 4.013181] init_module_from_file+0x88/0xd4\n[ 4.013187] __arm64_sys_finit_module+0x258/0x350\n[ 4.013194] invoke_syscall.constprop.0+0x50/0xe0\n[ 4.013202] do_el0_svc+0xa8/0xe0\n[ 4.013208] el0_svc+0x3c/0x140\n[ 4.013215] el0t_64_sync_handler+0x120/0x12c\n[ 4.013222] el0t_64_sync+0x190/0x194\n[ 4.013228] SMP: stopping secondary CPUs\nThe correct way is to wait handshake, but it needs BUS clock of\nBLK-CTL be enabled, which is in separate driver. So delay is the\nonly option here. The udelay(10) is a data got by experiment."], "name": "CVE-2024-56618", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-12-27T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2024-56618\nhttps://nvd.nist.gov/vuln/detail/CVE-2024-56618\nhttps://lore.kernel.org/linux-cve-announce/2024122709-CVE-2024-56618-44a1@gregkh/T"], "threat_severity": "Moderate"}

{}