{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2025-21727", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-12-29T08:45:45.754Z", "datePublished": "2025-02-27T02:07:33.501Z", "dateUpdated": "2026-05-12T12:03:30.794Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T21:05:15.704Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npadata: fix UAF in padata_reorder\n\nA bug was found when run ltp test:\n\nBUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0\nRead of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206\n\nCPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+\nWorkqueue: pdecrypt_parallel padata_parallel_worker\nCall Trace:\n<TASK>\ndump_stack_lvl+0x32/0x50\nprint_address_description.constprop.0+0x6b/0x3d0\nprint_report+0xdd/0x2c0\nkasan_report+0xa5/0xd0\npadata_find_next+0x29/0x1a0\npadata_reorder+0x131/0x220\npadata_parallel_worker+0x3d/0xc0\nprocess_one_work+0x2ec/0x5a0\n\nIf 'mdelay(10)' is added before calling 'padata_find_next' in the\n'padata_reorder' function, this issue could be reproduced easily with\nltp test (pcrypt_aead01).\n\nThis can be explained as bellow:\n\npcrypt_aead_encrypt\n...\npadata_do_parallel\nrefcount_inc(&pd->refcnt); // add refcnt\n...\npadata_do_serial\npadata_reorder // pd\nwhile (1) {\npadata_find_next(pd, true); // using pd\nqueue_work_on\n...\npadata_serial_worker\t\t\t\tcrypto_del_alg\npadata_put_pd_cnt // sub refcnt\n\t\t\t\t\t\tpadata_free_shell\n\t\t\t\t\t\tpadata_put_pd(ps->pd);\n\t\t\t\t\t\t// pd is freed\n// loop again, but pd is freed\n// call padata_find_next, UAF\n}\n\nIn the padata_reorder function, when it loops in 'while', if the alg is\ndeleted, the refcnt may be decreased to 0 before entering\n'padata_find_next', which leads to UAF.\n\nAs mentioned in [1], do_serial is supposed to be called with BHs disabled\nand always happen under RCU protection, to address this issue, add\nsynchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls\nto finish.\n\n[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/\n[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/"}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["kernel/padata.c"], "versions": [{"version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "f78170bee51469734b1a306a74fc5f777bb22ba6", "status": "affected", "versionType": "git"}, {"version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "f3e0b9f790f8e8065d59e67b565a83154d9f3079", "status": "affected", "versionType": "git"}, {"version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "0ae2f332cfd2d74cf3ce344ec9938cf3e29c3ccd", "status": "affected", "versionType": "git"}, {"version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "bbccae982e9fa1d7abcb23a5ec81cb0ec883f7de", "status": "affected", "versionType": "git"}, {"version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "573ac9c70bf7885dc85d82fa44550581bfc3b738", "status": "affected", "versionType": "git"}, {"version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "80231f069240d52e98b6a317456c67b2eafd0781", "status": "affected", "versionType": "git"}, {"version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "e01780ea4661172734118d2a5f41bc9720765668", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["kernel/padata.c"], "versions": [{"version": "5.4", "status": "affected"}, {"version": "0", "lessThan": "5.4", "status": "unaffected", "versionType": "semver"}, {"version": "5.10.235", "lessThanOrEqual": "5.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.15.179", "lessThanOrEqual": "5.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.129", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.76", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.13", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.13.2", "lessThanOrEqual": "6.13.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.14", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.4", "versionEndExcluding": "5.10.235"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.4", "versionEndExcluding": "5.15.179"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.4", "versionEndExcluding": "6.1.129"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.4", "versionEndExcluding": "6.6.76"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.4", "versionEndExcluding": "6.12.13"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.4", "versionEndExcluding": "6.13.2"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.4", "versionEndExcluding": "6.14"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/f78170bee51469734b1a306a74fc5f777bb22ba6"}, {"url": "https://git.kernel.org/stable/c/f3e0b9f790f8e8065d59e67b565a83154d9f3079"}, {"url": "https://git.kernel.org/stable/c/0ae2f332cfd2d74cf3ce344ec9938cf3e29c3ccd"}, {"url": "https://git.kernel.org/stable/c/bbccae982e9fa1d7abcb23a5ec81cb0ec883f7de"}, {"url": "https://git.kernel.org/stable/c/573ac9c70bf7885dc85d82fa44550581bfc3b738"}, {"url": "https://git.kernel.org/stable/c/80231f069240d52e98b6a317456c67b2eafd0781"}, {"url": "https://git.kernel.org/stable/c/e01780ea4661172734118d2a5f41bc9720765668"}], "title": "padata: fix UAF in padata_reorder", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 7.8, "attackVector": "LOCAL", "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "integrityImpact": "HIGH", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "HIGH"}}, {"other": {"type": "ssvc", "content": {"id": "CVE-2025-21727", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2025-02-27T17:58:06.104597Z"}}}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "cweId": "CWE-416", "description": "CWE-416 Use After Free"}]}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-02-27T18:02:27.953Z"}}, {"title": "CVE Program Container", "references": [{"url": "https://lists.debian.org/debian-lts-announce/2025/05/msg00030.html"}, {"url": "https://lists.debian.org/debian-lts-announce/2025/03/msg00028.html"}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2025-11-03T19:36:30.604Z"}}, {"x_adpType": "supplier", "providerMetadata": {"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e", "shortName": "siemens-SADP", "dateUpdated": "2026-05-12T12:03:30.794Z"}, "affected": [{"vendor": "Siemens", "product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem", "versions": [{"status": "affected", "version": "0", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}], "references": [{"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"}]}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CVE Program Container", "references": [{"url": "https://lists.debian.org/debian-lts-announce/2025/05/msg00030.html"}, {"url": "https://lists.debian.org/debian-lts-announce/2025/03/msg00028.html"}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2025-11-03T19:36:30.604Z"}}, {"affected": [{"vendor": "Siemens", "product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem", "versions": [{"status": "affected", "version": "0", "lessThan": "*", "versionType": "custom"}], "defaultStatus": "unknown"}], "x_adpType": "supplier", "references": [{"url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"}], "providerMetadata": {"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e", "shortName": "siemens-SADP", "dateUpdated": "2026-05-12T12:03:30.794Z"}}, {"title": "CISA ADP Vulnrichment", "metrics": [{"cvssV3_1": {"scope": "UNCHANGED", "version": "3.1", "baseScore": 7.8, "attackVector": "LOCAL", "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "integrityImpact": "HIGH", "userInteraction": "NONE", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "LOW", "confidentialityImpact": "HIGH"}}, {"other": {"type": "ssvc", "content": {"id": "CVE-2025-21727", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2025-02-27T17:58:06.104597Z"}}}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "cweId": "CWE-416", "description": "CWE-416 Use After Free"}]}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-02-27T17:58:07.900Z"}}], "cna": {"title": "padata: fix UAF in padata_reorder", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "f78170bee51469734b1a306a74fc5f777bb22ba6", "versionType": "git"}, {"status": "affected", "version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "f3e0b9f790f8e8065d59e67b565a83154d9f3079", "versionType": "git"}, {"status": "affected", "version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "0ae2f332cfd2d74cf3ce344ec9938cf3e29c3ccd", "versionType": "git"}, {"status": "affected", "version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "bbccae982e9fa1d7abcb23a5ec81cb0ec883f7de", "versionType": "git"}, {"status": "affected", "version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "573ac9c70bf7885dc85d82fa44550581bfc3b738", "versionType": "git"}, {"status": "affected", "version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "80231f069240d52e98b6a317456c67b2eafd0781", "versionType": "git"}, {"status": "affected", "version": "b128a30409356df65f1a51cff3eb986cac8cfedc", "lessThan": "e01780ea4661172734118d2a5f41bc9720765668", "versionType": "git"}], "programFiles": ["kernel/padata.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "5.4"}, {"status": "unaffected", "version": "0", "lessThan": "5.4", "versionType": "semver"}, {"status": "unaffected", "version": "5.10.235", "versionType": "semver", "lessThanOrEqual": "5.10.*"}, {"status": "unaffected", "version": "5.15.179", "versionType": "semver", "lessThanOrEqual": "5.15.*"}, {"status": "unaffected", "version": "6.1.129", "versionType": "semver", "lessThanOrEqual": "6.1.*"}, {"status": "unaffected", "version": "6.6.76", "versionType": "semver", "lessThanOrEqual": "6.6.*"}, {"status": "unaffected", "version": "6.12.13", "versionType": "semver", "lessThanOrEqual": "6.12.*"}, {"status": "unaffected", "version": "6.13.2", "versionType": "semver", "lessThanOrEqual": "6.13.*"}, {"status": "unaffected", "version": "6.14", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["kernel/padata.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/f78170bee51469734b1a306a74fc5f777bb22ba6"}, {"url": "https://git.kernel.org/stable/c/f3e0b9f790f8e8065d59e67b565a83154d9f3079"}, {"url": "https://git.kernel.org/stable/c/0ae2f332cfd2d74cf3ce344ec9938cf3e29c3ccd"}, {"url": "https://git.kernel.org/stable/c/bbccae982e9fa1d7abcb23a5ec81cb0ec883f7de"}, {"url": "https://git.kernel.org/stable/c/573ac9c70bf7885dc85d82fa44550581bfc3b738"}, {"url": "https://git.kernel.org/stable/c/80231f069240d52e98b6a317456c67b2eafd0781"}, {"url": "https://git.kernel.org/stable/c/e01780ea4661172734118d2a5f41bc9720765668"}], "x_generator": {"engine": "bippy-1.2.0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npadata: fix UAF in padata_reorder\n\nA bug was found when run ltp test:\n\nBUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0\nRead of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206\n\nCPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+\nWorkqueue: pdecrypt_parallel padata_parallel_worker\nCall Trace:\n<TASK>\ndump_stack_lvl+0x32/0x50\nprint_address_description.constprop.0+0x6b/0x3d0\nprint_report+0xdd/0x2c0\nkasan_report+0xa5/0xd0\npadata_find_next+0x29/0x1a0\npadata_reorder+0x131/0x220\npadata_parallel_worker+0x3d/0xc0\nprocess_one_work+0x2ec/0x5a0\n\nIf 'mdelay(10)' is added before calling 'padata_find_next' in the\n'padata_reorder' function, this issue could be reproduced easily with\nltp test (pcrypt_aead01).\n\nThis can be explained as bellow:\n\npcrypt_aead_encrypt\n...\npadata_do_parallel\nrefcount_inc(&pd->refcnt); // add refcnt\n...\npadata_do_serial\npadata_reorder // pd\nwhile (1) {\npadata_find_next(pd, true); // using pd\nqueue_work_on\n...\npadata_serial_worker\t\t\t\tcrypto_del_alg\npadata_put_pd_cnt // sub refcnt\n\t\t\t\t\t\tpadata_free_shell\n\t\t\t\t\t\tpadata_put_pd(ps->pd);\n\t\t\t\t\t\t// pd is freed\n// loop again, but pd is freed\n// call padata_find_next, UAF\n}\n\nIn the padata_reorder function, when it loops in 'while', if the alg is\ndeleted, the refcnt may be decreased to 0 before entering\n'padata_find_next', which leads to UAF.\n\nAs mentioned in [1], do_serial is supposed to be called with BHs disabled\nand always happen under RCU protection, to address this issue, add\nsynchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls\nto finish.\n\n[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/\n[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/"}], "cpeApplicability": [{"nodes": [{"negate": false, "cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.10.235", "versionStartIncluding": "5.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.15.179", "versionStartIncluding": "5.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.1.129", "versionStartIncluding": "5.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.6.76", "versionStartIncluding": "5.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.12.13", "versionStartIncluding": "5.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.13.2", "versionStartIncluding": "5.4"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.14", "versionStartIncluding": "5.4"}], "operator": "OR"}]}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T21:05:15.704Z"}}}, "cveMetadata": {"cveId": "CVE-2025-21727", "state": "PUBLISHED", "dateUpdated": "2026-05-12T12:03:30.794Z", "dateReserved": "2024-12-29T08:45:45.754Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2025-02-27T02:07:33.501Z", "assignerShortName": "Linux"}, "dataVersion": "5.2"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "5FEF389E-870E-4BCB-A3FF-0B8042738CF0", "versionEndExcluding": "5.10.235", "versionStartIncluding": "5.4", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "C708062C-4E1B-465F-AE6D-C09C46400875", "versionEndExcluding": "5.15.179", "versionStartIncluding": "5.11", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "2DA5009C-C9B9-4A1D-9B96-78427E8F232C", "versionEndExcluding": "6.1.129", "versionStartIncluding": "5.16", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "A6D70701-9CB6-4222-A957-00A419878993", "versionEndExcluding": "6.6.76", "versionStartIncluding": "6.2", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "2897389C-A8C3-4D69-90F2-E701B3D66373", "versionEndExcluding": "6.12.13", "versionStartIncluding": "6.7", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "6D4116B1-1BFD-4F23-BA84-169CC05FC5A3", "versionEndExcluding": "6.13.2", "versionStartIncluding": "6.13", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\npadata: fix UAF in padata_reorder\n\nA bug was found when run ltp test:\n\nBUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0\nRead of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206\n\nCPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+\nWorkqueue: pdecrypt_parallel padata_parallel_worker\nCall Trace:\n<TASK>\ndump_stack_lvl+0x32/0x50\nprint_address_description.constprop.0+0x6b/0x3d0\nprint_report+0xdd/0x2c0\nkasan_report+0xa5/0xd0\npadata_find_next+0x29/0x1a0\npadata_reorder+0x131/0x220\npadata_parallel_worker+0x3d/0xc0\nprocess_one_work+0x2ec/0x5a0\n\nIf 'mdelay(10)' is added before calling 'padata_find_next' in the\n'padata_reorder' function, this issue could be reproduced easily with\nltp test (pcrypt_aead01).\n\nThis can be explained as bellow:\n\npcrypt_aead_encrypt\n...\npadata_do_parallel\nrefcount_inc(&pd->refcnt); // add refcnt\n...\npadata_do_serial\npadata_reorder // pd\nwhile (1) {\npadata_find_next(pd, true); // using pd\nqueue_work_on\n...\npadata_serial_worker\t\t\t\tcrypto_del_alg\npadata_put_pd_cnt // sub refcnt\n\t\t\t\t\t\tpadata_free_shell\n\t\t\t\t\t\tpadata_put_pd(ps->pd);\n\t\t\t\t\t\t// pd is freed\n// loop again, but pd is freed\n// call padata_find_next, UAF\n}\n\nIn the padata_reorder function, when it loops in 'while', if the alg is\ndeleted, the refcnt may be decreased to 0 before entering\n'padata_find_next', which leads to UAF.\n\nAs mentioned in [1], do_serial is supposed to be called with BHs disabled\nand always happen under RCU protection, to address this issue, add\nsynchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls\nto finish.\n\n[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/\n[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/"}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: padata: correcci\u00f3n de UAF en padata_reorder Se encontr\u00f3 un error al ejecutar la prueba ltp: ERROR: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&amp;pd-&gt;refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps-&gt;pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } En la funci\u00f3n padata_reorder, cuando se repite en 'while', si se elimina el alg, el refcnt puede disminuirse a 0 antes de ingresar a 'padata_find_next', lo que lleva a UAF. Como se mencion\u00f3 en [1], se supone que do_serial se debe llamar con los BH deshabilitados y siempre ocurre bajo la protecci\u00f3n de RCU, para abordar este problema, agreguesynchronous_rcu() en 'padata_free_shell' y espere a que finalicen todas las llamadas a _do_serial. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/"}], "id": "CVE-2025-21727", "lastModified": "2026-05-12T13:16:33.687", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary"}]}, "published": "2025-02-27T02:15:16.423", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/0ae2f332cfd2d74cf3ce344ec9938cf3e29c3ccd"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/573ac9c70bf7885dc85d82fa44550581bfc3b738"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/80231f069240d52e98b6a317456c67b2eafd0781"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/bbccae982e9fa1d7abcb23a5ec81cb0ec883f7de"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/e01780ea4661172734118d2a5f41bc9720765668"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/f3e0b9f790f8e8065d59e67b565a83154d9f3079"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/f78170bee51469734b1a306a74fc5f777bb22ba6"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://lists.debian.org/debian-lts-announce/2025/03/msg00028.html"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://lists.debian.org/debian-lts-announce/2025/05/msg00030.html"}, {"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e", "url": "https://cert-portal.siemens.com/productcert/html/ssa-265688.html"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-416"}], "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary"}]}

{"affected_release": [{"advisory": "RHSA-2020:4431", "cpe": "cpe:/o:redhat:enterprise_linux:8", "package": "kernel-0:4.18.0-240.el8", "product_name": "Red Hat Enterprise Linux 8", "release_date": "2020-11-04T00:00:00Z"}], "bugzilla": {"description": "kernel: padata: fix UAF in padata_reorder", "id": "2348516", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2348516"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.0", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H", "status": "verified"}, "cwe": "CWE-820", "details": ["In the Linux kernel, the following vulnerability has been resolved:\npadata: fix UAF in padata_reorder\nA bug was found when run ltp test:\nBUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0\nRead of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206\nCPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+\nWorkqueue: pdecrypt_parallel padata_parallel_worker\nCall Trace:\n<TASK>\ndump_stack_lvl+0x32/0x50\nprint_address_description.constprop.0+0x6b/0x3d0\nprint_report+0xdd/0x2c0\nkasan_report+0xa5/0xd0\npadata_find_next+0x29/0x1a0\npadata_reorder+0x131/0x220\npadata_parallel_worker+0x3d/0xc0\nprocess_one_work+0x2ec/0x5a0\nIf 'mdelay(10)' is added before calling 'padata_find_next' in the\n'padata_reorder' function, this issue could be reproduced easily with\nltp test (pcrypt_aead01).\nThis can be explained as bellow:\npcrypt_aead_encrypt\n...\npadata_do_parallel\nrefcount_inc(&pd->refcnt); // add refcnt\n...\npadata_do_serial\npadata_reorder // pd\nwhile (1) {\npadata_find_next(pd, true); // using pd\nqueue_work_on\n...\npadata_serial_workercrypto_del_alg\npadata_put_pd_cnt // sub refcnt\npadata_free_shell\npadata_put_pd(ps->pd);\n// pd is freed\n// loop again, but pd is freed\n// call padata_find_next, UAF\n}\nIn the padata_reorder function, when it loops in 'while', if the alg is\ndeleted, the refcnt may be decreased to 0 before entering\n'padata_find_next', which leads to UAF.\nAs mentioned in [1], do_serial is supposed to be called with BHs disabled\nand always happen under RCU protection, to address this issue, add\nsynchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls\nto finish.\n[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/\n[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/"], "name": "CVE-2025-21727", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Under investigation", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Under investigation", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-02-27T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2025-21727\nhttps://nvd.nist.gov/vuln/detail/CVE-2025-21727\nhttps://lore.kernel.org/linux-cve-announce/2025022648-CVE-2025-21727-b034@gregkh/T"], "threat_severity": "Moderate"}

{}