{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2025-38397", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-04-16T04:51:24.012Z", "datePublished": "2025-07-25T12:53:41.566Z", "dateUpdated": "2026-05-11T21:27:11.550Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T21:27:11.550Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvme-multipath: fix suspicious RCU usage warning\n\nWhen I run the NVME over TCP test in virtme-ng, I get the following\n\"suspicious RCU usage\" warning in nvme_mpath_add_sysfs_link():\n\n'''\n[ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77.\n[ 5.027401][ T183] nvme nvme0: creating 2 I/O queues.\n[ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues.\n[ 5.032587][ T183] nvme nvme0: new ctrl: NQN \"nqn.2025-06.org.nvmexpress.mptcp\", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77\n[ 5.042214][ T25]\n[ 5.042440][ T25] =============================\n[ 5.042579][ T25] WARNING: suspicious RCU usage\n[ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted\n[ 5.042812][ T25] -----------------------------\n[ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!!\n[ 5.043111][ T25]\n[ 5.043111][ T25] other info that might help us debug this:\n[ 5.043111][ T25]\n[ 5.043341][ T25]\n[ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1\n[ 5.043502][ T25] 3 locks held by kworker/u9:0/25:\n[ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350\n[ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350\n[ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0\n[ 5.044300][ T25]\n[ 5.044300][ T25] stack backtrace:\n[ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full)\n[ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011\n[ 5.044442][ T25] Workqueue: async async_run_entry_fn\n[ 5.044445][ T25] Call Trace:\n[ 5.044446][ T25] <TASK>\n[ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0\n[ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1\n[ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0\n[ 5.044459][ T25] ? queue_work_on+0x90/0xf0\n[ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110\n[ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0\n[ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0\n[ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10\n[ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580\n[ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0\n[ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240\n[ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10\n[ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10\n[ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0\n[ 5.044498][ T25] ? validate_chain+0x232/0x4f0\n[ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810\n[ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10\n[ 5.044508][ T25] ? find_held_lock+0x2b/0x80\n[ 5.044512][ T25] ? ktime_get+0x16d/0x220\n[ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30\n[ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10\n[ 5.044522][ T25] async_run_entry_fn+0x97/0x560\n[ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0\n[ 5.044526][ T25] process_one_work+0xd3c/0x1350\n[ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10\n[ 5.044536][ T25] ? assign_work+0x16c/0x240\n[ 5.044539][ T25] worker_thread+0x4da/0xd50\n[ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10\n[ 5.044546][ T25] kthread+0x356/0x5c0\n[ 5.044548][ T25] ? __pfx_kthread+0x10/0x10\n[ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0\n[ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180\n[ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0\n[ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0\n[ 5.044557][ T25] ? __pfx_kthread+0x10/0x10\n[ 5.04\n---truncated---"}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/nvme/host/multipath.c"], "versions": [{"version": "4dbd2b2ebe4cc5f101881e2c091a70ccd38db7ee", "lessThan": "a432383e6cd86d9fda00a6073ed35c1067a836d6", "status": "affected", "versionType": "git"}, {"version": "4dbd2b2ebe4cc5f101881e2c091a70ccd38db7ee", "lessThan": "d6811074203b13f715ce2480ac64c5b1c773f2a5", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/nvme/host/multipath.c"], "versions": [{"version": "6.15", "status": "affected"}, {"version": "0", "lessThan": "6.15", "status": "unaffected", "versionType": "semver"}, {"version": "6.15.6", "lessThanOrEqual": "6.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.16", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.15", "versionEndExcluding": "6.15.6"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.15", "versionEndExcluding": "6.16"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/a432383e6cd86d9fda00a6073ed35c1067a836d6"}, {"url": "https://git.kernel.org/stable/c/d6811074203b13f715ce2480ac64c5b1c773f2a5"}], "title": "nvme-multipath: fix suspicious RCU usage warning", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "575B7891-8019-4D0D-B284-1B8DA410C942", "versionEndExcluding": "6.15.6", "versionStartIncluding": "6.15", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc1:*:*:*:*:*:*", "matchCriteriaId": "6D4894DB-CCFE-4602-B1BF-3960B2E19A01", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc2:*:*:*:*:*:*", "matchCriteriaId": "09709862-E348-4378-8632-5A7813EDDC86", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc3:*:*:*:*:*:*", "matchCriteriaId": "415BF58A-8197-43F5-B3D7-D1D63057A26E", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc4:*:*:*:*:*:*", "matchCriteriaId": "A0517869-312D-4429-80C2-561086E1421C", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvme-multipath: fix suspicious RCU usage warning\n\nWhen I run the NVME over TCP test in virtme-ng, I get the following\n\"suspicious RCU usage\" warning in nvme_mpath_add_sysfs_link():\n\n'''\n[ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77.\n[ 5.027401][ T183] nvme nvme0: creating 2 I/O queues.\n[ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues.\n[ 5.032587][ T183] nvme nvme0: new ctrl: NQN \"nqn.2025-06.org.nvmexpress.mptcp\", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77\n[ 5.042214][ T25]\n[ 5.042440][ T25] =============================\n[ 5.042579][ T25] WARNING: suspicious RCU usage\n[ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted\n[ 5.042812][ T25] -----------------------------\n[ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!!\n[ 5.043111][ T25]\n[ 5.043111][ T25] other info that might help us debug this:\n[ 5.043111][ T25]\n[ 5.043341][ T25]\n[ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1\n[ 5.043502][ T25] 3 locks held by kworker/u9:0/25:\n[ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350\n[ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350\n[ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0\n[ 5.044300][ T25]\n[ 5.044300][ T25] stack backtrace:\n[ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full)\n[ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011\n[ 5.044442][ T25] Workqueue: async async_run_entry_fn\n[ 5.044445][ T25] Call Trace:\n[ 5.044446][ T25] <TASK>\n[ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0\n[ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1\n[ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0\n[ 5.044459][ T25] ? queue_work_on+0x90/0xf0\n[ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110\n[ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0\n[ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0\n[ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10\n[ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580\n[ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0\n[ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240\n[ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10\n[ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10\n[ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0\n[ 5.044498][ T25] ? validate_chain+0x232/0x4f0\n[ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810\n[ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10\n[ 5.044508][ T25] ? find_held_lock+0x2b/0x80\n[ 5.044512][ T25] ? ktime_get+0x16d/0x220\n[ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30\n[ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10\n[ 5.044522][ T25] async_run_entry_fn+0x97/0x560\n[ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0\n[ 5.044526][ T25] process_one_work+0xd3c/0x1350\n[ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10\n[ 5.044536][ T25] ? assign_work+0x16c/0x240\n[ 5.044539][ T25] worker_thread+0x4da/0xd50\n[ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10\n[ 5.044546][ T25] kthread+0x356/0x5c0\n[ 5.044548][ T25] ? __pfx_kthread+0x10/0x10\n[ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0\n[ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180\n[ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0\n[ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0\n[ 5.044557][ T25] ? __pfx_kthread+0x10/0x10\n[ 5.04\n---truncated---"}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: nvme-multipath: corregir advertencia de uso sospechoso de RCU Cuando ejecuto la prueba NVME sobre TCP en virtme-ng, obtengo la siguiente advertencia de \"uso sospechoso de RCU\" en nvme_mpath_add_sysfs_link(): ''' [ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77. [ 5.027401][ T183] nvme nvme0: creating 2 I/O queues. [ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues. [ 5.032587][ T183] nvme nvme0: new ctrl: NQN \"nqn.2025-06.org.nvmexpress.mptcp\", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77 [ 5.042214][ T25] [ 5.042440][ T25] ============================= [ 5.042579][ T25] WARNING: suspicious RCU usage [ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted [ 5.042812][ T25] ----------------------------- [ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!! [ 5.043111][ T25] [ 5.043111][ T25] other info that might help us debug this: [ 5.043111][ T25] [ 5.043341][ T25] [ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1 [ 5.043502][ T25] 3 locks held by kworker/u9:0/25: [ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350 [ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&amp;entry-&gt;work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350 [ 5.044084][ T25] #2: ffff888013ee0020 (&amp;head-&gt;srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0 [ 5.044300][ T25] [ 5.044300][ T25] stack backtrace: [ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full) [ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.044442][ T25] Workqueue: async async_run_entry_fn [ 5.044445][ T25] Call Trace: [ 5.044446][ T25] [ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0 [ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1 [ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0 [ 5.044459][ T25] ? queue_work_on+0x90/0xf0 [ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110 [ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0 [ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0 [ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10 [ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580 [ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0 [ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240 [ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10 [ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10 [ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0 [ 5.044498][ T25] ? validate_chain+0x232/0x4f0 [ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810 [ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10 [ 5.044508][ T25] ? find_held_lock+0x2b/0x80 [ 5.044512][ T25] ? ktime_get+0x16d/0x220 [ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30 [ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10 [ 5.044522][ T25] async_run_entry_fn+0x97/0x560 [ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044526][ T25] process_one_work+0xd3c/0x1350 [ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10 [ 5.044536][ T25] ? assign_work+0x16c/0x240 [ 5.044539][ T25] worker_thread+0x4da/0xd50 [ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10 [ 5.044546][ T25] kthread+0x356/0x5c0 [ 5.044548][ T25] ? __pfx_kthread+0x10/0x10 [ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180 [ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0 [ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0 [ 5.044557][ T25] ? __pfx_kthread+0x10/0x10 [ 5.04 ---truncated---"}], "id": "CVE-2025-38397", "lastModified": "2025-11-19T19:12:48.980", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2025-07-25T13:15:29.193", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/a432383e6cd86d9fda00a6073ed35c1067a836d6"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/d6811074203b13f715ce2480ac64c5b1c773f2a5"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: nvme-multipath: fix suspicious RCU usage warning", "id": "2383431", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2383431"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "details": ["In the Linux kernel, the following vulnerability has been resolved:\nnvme-multipath: fix suspicious RCU usage warning\nWhen I run the NVME over TCP test in virtme-ng, I get the following\n\"suspicious RCU usage\" warning in nvme_mpath_add_sysfs_link():\n'''\n[ 5.024557][ T44] nvmet: Created nvm controller 1 for subsystem nqn.2025-06.org.nvmexpress.mptcp for NQN nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77.\n[ 5.027401][ T183] nvme nvme0: creating 2 I/O queues.\n[ 5.029017][ T183] nvme nvme0: mapped 2/0/0 default/read/poll queues.\n[ 5.032587][ T183] nvme nvme0: new ctrl: NQN \"nqn.2025-06.org.nvmexpress.mptcp\", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:f7f6b5e0-ff97-4894-98ac-c85309e0bc77\n[ 5.042214][ T25]\n[ 5.042440][ T25] =============================\n[ 5.042579][ T25] WARNING: suspicious RCU usage\n[ 5.042705][ T25] 6.16.0-rc3+ #23 Not tainted\n[ 5.042812][ T25] -----------------------------\n[ 5.042934][ T25] drivers/nvme/host/multipath.c:1203 RCU-list traversed in non-reader section!!\n[ 5.043111][ T25]\n[ 5.043111][ T25] other info that might help us debug this:\n[ 5.043111][ T25]\n[ 5.043341][ T25]\n[ 5.043341][ T25] rcu_scheduler_active = 2, debug_locks = 1\n[ 5.043502][ T25] 3 locks held by kworker/u9:0/25:\n[ 5.043615][ T25] #0: ffff888008730948 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x7ed/0x1350\n[ 5.043830][ T25] #1: ffffc900001afd40 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0xcf3/0x1350\n[ 5.044084][ T25] #2: ffff888013ee0020 (&head->srcu){.+.+}-{0:0}, at: nvme_mpath_add_sysfs_link.part.0+0xb4/0x3a0\n[ 5.044300][ T25]\n[ 5.044300][ T25] stack backtrace:\n[ 5.044439][ T25] CPU: 0 UID: 0 PID: 25 Comm: kworker/u9:0 Not tainted 6.16.0-rc3+ #23 PREEMPT(full)\n[ 5.044441][ T25] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011\n[ 5.044442][ T25] Workqueue: async async_run_entry_fn\n[ 5.044445][ T25] Call Trace:\n[ 5.044446][ T25] <TASK>\n[ 5.044449][ T25] dump_stack_lvl+0x6f/0xb0\n[ 5.044453][ T25] lockdep_rcu_suspicious.cold+0x4f/0xb1\n[ 5.044457][ T25] nvme_mpath_add_sysfs_link.part.0+0x2fb/0x3a0\n[ 5.044459][ T25] ? queue_work_on+0x90/0xf0\n[ 5.044461][ T25] ? lockdep_hardirqs_on+0x78/0x110\n[ 5.044466][ T25] nvme_mpath_set_live+0x1e9/0x4f0\n[ 5.044470][ T25] nvme_mpath_add_disk+0x240/0x2f0\n[ 5.044472][ T25] ? __pfx_nvme_mpath_add_disk+0x10/0x10\n[ 5.044475][ T25] ? add_disk_fwnode+0x361/0x580\n[ 5.044480][ T25] nvme_alloc_ns+0x81c/0x17c0\n[ 5.044483][ T25] ? kasan_quarantine_put+0x104/0x240\n[ 5.044487][ T25] ? __pfx_nvme_alloc_ns+0x10/0x10\n[ 5.044495][ T25] ? __pfx_nvme_find_get_ns+0x10/0x10\n[ 5.044496][ T25] ? rcu_read_lock_any_held+0x45/0xa0\n[ 5.044498][ T25] ? validate_chain+0x232/0x4f0\n[ 5.044503][ T25] nvme_scan_ns+0x4c8/0x810\n[ 5.044506][ T25] ? __pfx_nvme_scan_ns+0x10/0x10\n[ 5.044508][ T25] ? find_held_lock+0x2b/0x80\n[ 5.044512][ T25] ? ktime_get+0x16d/0x220\n[ 5.044517][ T25] ? kvm_clock_get_cycles+0x18/0x30\n[ 5.044520][ T25] ? __pfx_nvme_scan_ns_async+0x10/0x10\n[ 5.044522][ T25] async_run_entry_fn+0x97/0x560\n[ 5.044523][ T25] ? rcu_is_watching+0x12/0xc0\n[ 5.044526][ T25] process_one_work+0xd3c/0x1350\n[ 5.044532][ T25] ? __pfx_process_one_work+0x10/0x10\n[ 5.044536][ T25] ? assign_work+0x16c/0x240\n[ 5.044539][ T25] worker_thread+0x4da/0xd50\n[ 5.044545][ T25] ? __pfx_worker_thread+0x10/0x10\n[ 5.044546][ T25] kthread+0x356/0x5c0\n[ 5.044548][ T25] ? __pfx_kthread+0x10/0x10\n[ 5.044549][ T25] ? ret_from_fork+0x1b/0x2e0\n[ 5.044552][ T25] ? __lock_release.isra.0+0x5d/0x180\n[ 5.044553][ T25] ? ret_from_fork+0x1b/0x2e0\n[ 5.044555][ T25] ? rcu_is_watching+0x12/0xc0\n[ 5.044557][ T25] ? __pfx_kthread+0x10/0x10\n[ 5.04\n---truncated---"], "name": "CVE-2025-38397", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-07-25T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2025-38397\nhttps://nvd.nist.gov/vuln/detail/CVE-2025-38397\nhttps://lore.kernel.org/linux-cve-announce/2025072509-CVE-2025-38397-d375@gregkh/T"], "threat_severity": "Moderate"}

{"created": "2025-07-26T11:22:07.432983+00:00", "updated": "2025-07-26T11:22:07.433051+00:00", "vendors": ["linux", "linux$PRODUCT$linux"]}