{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2025-38509", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-04-16T04:51:24.022Z", "datePublished": "2025-08-16T10:54:46.493Z", "dateUpdated": "2026-05-11T21:29:23.717Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T21:29:23.717Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: mac80211: reject VHT opmode for unsupported channel widths\n\nVHT operating mode notifications are not defined for channel widths\nbelow 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the\nVHT specification and must be rejected.\n\nWithout this check, malformed notifications using these widths may\nreach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to\ninvalid input. This issue was reported by syzbot.\n\nReject these unsupported widths early in sta_link_apply_parameters()\nwhen opmode_notif is used. The accepted set includes 20, 40, 80, 160,\nand 80+80 MHz, which are valid for VHT. While 320 MHz is not defined\nfor VHT, it is allowed to avoid rejecting HE or EHT clients that may\nstill send a VHT opmode notification."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["net/mac80211/cfg.c"], "versions": [{"version": "751e7489c1d74b94ffffbed619d8fd724eeff4ee", "lessThan": "18eca59a04500b68a90e0c5c873f97c9d1ea2bfa", "status": "affected", "versionType": "git"}, {"version": "751e7489c1d74b94ffffbed619d8fd724eeff4ee", "lessThan": "58fcb1b4287ce38850402bb2bb16d09bf77b91d9", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["net/mac80211/cfg.c"], "versions": [{"version": "6.13", "status": "affected"}, {"version": "0", "lessThan": "6.13", "status": "unaffected", "versionType": "semver"}, {"version": "6.15.7", "lessThanOrEqual": "6.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.16", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.13", "versionEndExcluding": "6.15.7"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.13", "versionEndExcluding": "6.16"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/18eca59a04500b68a90e0c5c873f97c9d1ea2bfa"}, {"url": "https://git.kernel.org/stable/c/58fcb1b4287ce38850402bb2bb16d09bf77b91d9"}], "title": "wifi: mac80211: reject VHT opmode for unsupported channel widths", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "F9C46937-5FA9-4335-AD7B-E7FC29453CE1", "versionEndExcluding": "6.15.7", "versionStartIncluding": "6.13", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc1:*:*:*:*:*:*", "matchCriteriaId": "6D4894DB-CCFE-4602-B1BF-3960B2E19A01", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc2:*:*:*:*:*:*", "matchCriteriaId": "09709862-E348-4378-8632-5A7813EDDC86", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc3:*:*:*:*:*:*", "matchCriteriaId": "415BF58A-8197-43F5-B3D7-D1D63057A26E", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc4:*:*:*:*:*:*", "matchCriteriaId": "A0517869-312D-4429-80C2-561086E1421C", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.16:rc5:*:*:*:*:*:*", "matchCriteriaId": "85421F4E-C863-4ABF-B4B4-E887CC2F7F92", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nwifi: mac80211: reject VHT opmode for unsupported channel widths\n\nVHT operating mode notifications are not defined for channel widths\nbelow 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the\nVHT specification and must be rejected.\n\nWithout this check, malformed notifications using these widths may\nreach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to\ninvalid input. This issue was reported by syzbot.\n\nReject these unsupported widths early in sta_link_apply_parameters()\nwhen opmode_notif is used. The accepted set includes 20, 40, 80, 160,\nand 80+80 MHz, which are valid for VHT. While 320 MHz is not defined\nfor VHT, it is allowed to avoid rejecting HE or EHT clients that may\nstill send a VHT opmode notification."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: wifi: mac80211: rechazar el modo de operaci\u00f3n VHT para anchos de canal no compatibles. Las notificaciones del modo de operaci\u00f3n VHT no est\u00e1n definidas para anchos de canal inferiores a 20 MHz. En particular, 5 MHz y 10 MHz no son v\u00e1lidos seg\u00fan la especificaci\u00f3n VHT y deben rechazarse. Sin esta comprobaci\u00f3n, las notificaciones malformadas que utilicen estos anchos pueden alcanzar ieee80211_chan_width_to_rx_bw(), lo que genera un WARN_ON debido a una entrada no v\u00e1lida. Este problema fue reportado por syzbot. Rechace estos anchos no compatibles al principio de sta_link_apply_parameters() cuando se utilice opmode_notif. El conjunto aceptado incluye 20, 40, 80, 160 y 80+80 MHz, que son v\u00e1lidos para VHT. Si bien 320 MHz no est\u00e1 definido para VHT, se permite evitar rechazar clientes HE o EHT que a\u00fan puedan enviar una notificaci\u00f3n de modo de operaci\u00f3n VHT."}], "id": "CVE-2025-38509", "lastModified": "2025-11-19T17:22:32.987", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2025-08-16T11:15:43.893", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/18eca59a04500b68a90e0c5c873f97c9d1ea2bfa"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/58fcb1b4287ce38850402bb2bb16d09bf77b91d9"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: wifi: mac80211: reject VHT opmode for unsupported channel widths", "id": "2391060", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2391060"}, "csaw": false, "cvss3": {"cvss3_base_score": "7.0", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H", "status": "draft"}, "details": ["In the Linux kernel, the following vulnerability has been resolved:\nwifi: mac80211: reject VHT opmode for unsupported channel widths\nVHT operating mode notifications are not defined for channel widths\nbelow 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the\nVHT specification and must be rejected.\nWithout this check, malformed notifications using these widths may\nreach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to\ninvalid input. This issue was reported by syzbot.\nReject these unsupported widths early in sta_link_apply_parameters()\nwhen opmode_notif is used. The accepted set includes 20, 40, 80, 160,\nand 80+80 MHz, which are valid for VHT. While 320 MHz is not defined\nfor VHT, it is allowed to avoid rejecting HE or EHT clients that may\nstill send a VHT opmode notification."], "name": "CVE-2025-38509", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Under investigation", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-08-16T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2025-38509\nhttps://nvd.nist.gov/vuln/detail/CVE-2025-38509\nhttps://lore.kernel.org/linux-cve-announce/2025081650-CVE-2025-38509-e803@gregkh/T"], "threat_severity": "Important"}

{"created": "2025-08-18T20:50:02.069506+00:00", "updated": "2025-08-18T20:50:02.069638+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}