{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-23417", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2026-01-13T15:37:46.014Z", "datePublished": "2026-04-02T11:40:57.837Z", "dateUpdated": "2026-05-11T22:06:30.275Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-05-11T22:06:30.275Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Fix constant blinding for PROBE_MEM32 stores\n\nBPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by\nbpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to\nsurvive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.\n\nThe root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM\nto BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,\nbefore bpf_jit_blind_constants() runs during JIT compilation. The\nblinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not\nBPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through\nunblinded.\n\nAdd BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the\nexisting BPF_ST|BPF_MEM cases. The blinding transformation is identical:\nload the blinded immediate into BPF_REG_AX via mov+xor, then convert\nthe immediate store to a register store (BPF_STX).\n\nThe rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so\nthe architecture JIT emits the correct arena addressing (R12-based on\nx86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes\nBPF_MEM mode; construct the instruction directly instead."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["kernel/bpf/core.c"], "versions": [{"version": "6082b6c328b5486da2b356eae94b8b83c98b5565", "lessThan": "56af722756ed82fee2ae5d5b4d04743407506195", "status": "affected", "versionType": "git"}, {"version": "6082b6c328b5486da2b356eae94b8b83c98b5565", "lessThan": "ccbf29b28b5554f9d65b2fb53b994673ad58b3bf", "status": "affected", "versionType": "git"}, {"version": "6082b6c328b5486da2b356eae94b8b83c98b5565", "lessThan": "de641ea08f8fff6906e169d2576c2ac54e562fbb", "status": "affected", "versionType": "git"}, {"version": "6082b6c328b5486da2b356eae94b8b83c98b5565", "lessThan": "2321a9596d2260310267622e0ad8fbfa6f95378f", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["kernel/bpf/core.c"], "versions": [{"version": "6.9", "status": "affected"}, {"version": "0", "lessThan": "6.9", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.80", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.18.21", "lessThanOrEqual": "6.18.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.19.11", "lessThanOrEqual": "6.19.*", "status": "unaffected", "versionType": "semver"}, {"version": "7.0", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.9", "versionEndExcluding": "6.12.80"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.9", "versionEndExcluding": "6.18.21"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.9", "versionEndExcluding": "6.19.11"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "6.9", "versionEndExcluding": "7.0"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/56af722756ed82fee2ae5d5b4d04743407506195"}, {"url": "https://git.kernel.org/stable/c/ccbf29b28b5554f9d65b2fb53b994673ad58b3bf"}, {"url": "https://git.kernel.org/stable/c/de641ea08f8fff6906e169d2576c2ac54e562fbb"}, {"url": "https://git.kernel.org/stable/c/2321a9596d2260310267622e0ad8fbfa6f95378f"}], "title": "bpf: Fix constant blinding for PROBE_MEM32 stores", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "AC9469D5-3400-4C2C-A51B-AF83A8E8F623", "versionEndExcluding": "6.12.80", "versionStartIncluding": "6.9.1", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "ED39847A-3B46-4729-B7CA-B2C30B9FA8FE", "versionEndExcluding": "6.18.21", "versionStartIncluding": "6.13", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "4CA2E747-A9EC-4518-9AA2-B4247FC748B7", "versionEndExcluding": "6.19.11", "versionStartIncluding": "6.19", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.9:-:*:*:*:*:*:*", "matchCriteriaId": "3F2A4A3D-068A-4CF2-A09F-9C7937DDB0A5", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*", "matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*", "matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*", "matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*", "matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*", "matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*", "matchCriteriaId": "1D2315C0-D46F-4F85-9754-F9E5E11374A6", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc7:*:*:*:*:*:*", "matchCriteriaId": "512EE3A8-A590-4501-9A94-5D4B268D6138", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Fix constant blinding for PROBE_MEM32 stores\n\nBPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by\nbpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to\nsurvive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.\n\nThe root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM\nto BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,\nbefore bpf_jit_blind_constants() runs during JIT compilation. The\nblinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not\nBPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through\nunblinded.\n\nAdd BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the\nexisting BPF_ST|BPF_MEM cases. The blinding transformation is identical:\nload the blinded immediate into BPF_REG_AX via mov+xor, then convert\nthe immediate store to a register store (BPF_STX).\n\nThe rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so\nthe architecture JIT emits the correct arena addressing (R12-based on\nx86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes\nBPF_MEM mode; construct the instruction directly instead."}], "id": "CVE-2026-23417", "lastModified": "2026-04-24T15:21:51.940", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2026-04-02T12:16:21.097", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/2321a9596d2260310267622e0ad8fbfa6f95378f"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/56af722756ed82fee2ae5d5b4d04743407506195"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/ccbf29b28b5554f9d65b2fb53b994673ad58b3bf"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/de641ea08f8fff6906e169d2576c2ac54e562fbb"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: bpf: Fix constant blinding for PROBE_MEM32 stores", "id": "2454315", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2454315"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "cwe": "CWE-807", "details": ["A flaw was found in the Linux kernel's Berkeley Packet Filter (BPF) component. This vulnerability occurs because the BPF_ST | BPF_PROBE_MEM32 immediate stores are not correctly handled by the constant blinding mechanism. As a result, user-controlled 32-bit immediate values can remain unblinded in JIT-compiled native code, potentially allowing an attacker to bypass security hardening measures."], "name": "CVE-2026-23417", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2026-04-02T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2026-23417\nhttps://nvd.nist.gov/vuln/detail/CVE-2026-23417\nhttps://lore.kernel.org/linux-cve-announce/2026040204-CVE-2026-23417-d6a2@gregkh/T"], "threat_severity": "Low"}

{"affected": [{"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[6082b6c328b5486da2b356eae94b8b83c98b5565,56af722756ed82fee2ae5d5b4d04743407506195)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[6082b6c328b5486da2b356eae94b8b83c98b5565,ccbf29b28b5554f9d65b2fb53b994673ad58b3bf)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[6082b6c328b5486da2b356eae94b8b83c98b5565,de641ea08f8fff6906e169d2576c2ac54e562fbb)"}}, {"platform": null, "status": "affected", "versions": {"scheme": "code_commit", "value": "[6082b6c328b5486da2b356eae94b8b83c98b5565,2321a9596d2260310267622e0ad8fbfa6f95378f)"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}, {"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "generic", "value": "6.9"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[0,6.9)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[6.12.80,6.13.0)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[6.18.21,6.19.0)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "semver", "value": "[6.19.11,6.20.0)"}}, {"platform": null, "status": "unaffected", "versions": {"scheme": "generic", "value": "[7.0-rc5,*]"}}], "enrichment": {"confidence": 99.0, "confidence_source": "inferred", "scores": [{"score": 99.0, "source": "inferred"}, {"score": 100.0, "source": "matching"}]}, "original": {"product": "Linux", "source": "cna", "vendor": "Linux"}, "product": "linux_kernel", "vendor": "linux"}], "analysis": {"en": {"generated_at": "2026-04-28T16:49:26.777132+00:00", "value": {"mitigation_remediation": ["Apply a Linux kernel update that contains the CVE-2026-23417 fix", "If a patch is not yet available, set the kernel parameter bpf_jit_harden=0 to disable the hardening feature", "As an alternative, disable the BPF JIT compiler entirely if a patched kernel is not feasible"], "summary": {"action": "Patch Now", "impact": "Kernel memory corruption via BPF JIT"}, "threat_synthesis": {"affected_systems": "The vulnerability applies to Linux kernel binaries that include the BPF JIT implementation with bpf_jit_harden set to 1 or higher and that have not yet incorporated the patch that adds blinding support for the PROBE_MEM32 store case. Because the input does not list specific kernel release numbers, any kernel version containing the unblinded store path before the fix is considered potentially affected.", "description_and_impact": "The Linux kernel\u2019s eBPF JIT compiler does not blind 32-bit immediate values written with the PROBE_MEM32 variant when the hardening flag bpf_jit_harden is enabled. This oversight allows a malicious eBPF program to leave a 32-bit immediate value unblinded and write it directly to an arbitrary kernel memory address, resulting in kernel memory corruption.", "risk_and_exploitability": "With a CVSS score of 5.5, the severity of this flaw is moderate. The EPSS score of less than 1% indicates a low probability of exploitation in the wild, and the vulnerability is not catalogued in the CISA KEV list. The likely attack vector is the execution of a crafted eBPF program that uses the unblinded PROBE_MEM32 store instruction; no confirmed exploits are reported, but kernel memory corruption could compromise system integrity."}}}}, "created": "2026-04-02T20:12:47.215864+00:00", "updated": "2026-04-28T17:00:13.418444+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}