comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:dt2815_attach+0x6e0/0x1110
Add hardware detection by reading the status register before attempting
any write operations. If the read returns 0xff, assume no hardware is
present and fail the attach with -ENODEV. This prevents crashes from
outb() operations on non-existent hardware.
Analysis and contextual insights are available on OpenCVE Cloud.
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
| Source | ID | Title |
|---|---|---|
Debian DLA |
DLA-4561-1 | linux-6.1 security update |
Debian DSA |
DSA-6243-1 | linux security update |
Thu, 07 May 2026 19:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-362 | |
| CPEs | cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:* |
|
| Metrics |
cvssV3_1
|
Sat, 02 May 2026 10:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-20 |
Sat, 02 May 2026 00:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-166 | |
| References |
|
Fri, 01 May 2026 23:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-20 |
Fri, 01 May 2026 14:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware. | |
| Title | comedi: dt2815: add hardware detection to prevent crash | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-05-11T22:15:06.157Z
Reserved: 2026-03-09T15:48:24.139Z
Link: CVE-2026-31751
No data.
Status : Analyzed
Published: 2026-05-01T15:16:37.960
Modified: 2026-05-07T19:11:00.483
Link: CVE-2026-31751
OpenCVE Enrichment
Updated: 2026-05-07T20:45:22Z
Debian DLA
Debian DSA